More than one email in Profile
Hi, I would like to know if it's possible to specified more than one email(To email address) in Profile or if I must define many profile for each email. Regards, Steve
Custom Monitors
I would like to monitor some of the counters available in the windows-nt-performance mib. I noticed on your oputils online demo that this mib was available however it is not included in the downloadable install of opmanager or oputils. 1) How can I get this mib? 2) How do I add this mib to opmanager? 3) Does it also need to be installed somehow on the hosts i wish to monitor?
Moving all configuration information to a new server
I am testing OpManager on a Windows box and have entered a lot of information. How can I move this set of information (servers/routers/printers/business views/alert rules/etc) to a new server (UNIX)? Is it as simple as copying some configuration files to the target machince? If so which ones? Speaking of this - how to I run backups of my configuration in case the monitoring box goes down? Thanks! Wayne
Juniper Router Stats
Is there any way to get Opmanager 5.6 to show interface stats and memory/CPU for juniper Routers? I have added my Junipers as custom devices and loaded the MIBs to the MIB folder. I can see the interfaces but I cannot get any stats to show. Am I missing the boat here or is this somethign that Opmanager cannot do?
SSL on OpManager
Hello, I'm trying to put SSL on my existing OpManager installation. I recompiled the Apache Webserver with the SSL module without to much problems. When SSL is activated in the Apache configuration, OpManager doesn't start up. However, everything works fine with the new compiled Apache when SSL is disabled. Do I have to change the config of OpManager somewhere ? Do you have a kind of HOWTO for SSL on OpManager ? Regards, Sacha
Firewall monitoring
Hi all, I have to firewalls CISCO PIX and S-box (checkpoint safe@office). For some reason i cannot monitor any of them. I provided the username and password for s-box but it's not working, moreover Pix doesn't ask for any username when you connecting to it from ssh/telnet. I configured the snmp community on PIX - and still nothing. Please help....
Real remote monitoring
I want to know if the following is possible. I have 3 custumors, each with a DSL line. I want to monitor the server and servr apllication's. I dont want a VPN connetion to the custumors so on the custumors side i need to install a sort of agent that send data to the monitoring system. Is this possible?
Cannot Uninstall/Reinstall OpManager
I have been using the free version of OpManager. For various reasons I have had to uninstall/reinstall it a couple of times. I have been trying to re-install it after de-installing it, but every time I run the installation, I get a message saying 'do you want to uninstall opmanager?' I say Yes, the process finishes, then I run the installer again to re-install, and get the same message again. I have checked the registry and the file system, and I can't find anything to do with OpManager in either,
Interface Ports
Switch mapper created picture of switch but when I unplug a port it does not see the change.
OPManager Database to externa MYSQL-Cluster
hy everybody, i would like to outhouse my local OPManager-Database to a externa Mysql-Server. How are the procedure to realized it? thanks for help, chris
How to remove OpManager Service
I am trying to install OpManager. I previously was using the free version. I ran the uninstall from the Control Panel. Now when I go to re-install OpManager I get a message saying 'do you want to uninstall opmanager?'. I reply yes, then get a message telling me that the OpManager service is being removed. The process runs to completion. I then try to run the installer again, and get a message asking me if I would like to remove Opmanager. I then get a message saying the service is being removed.
Disk Utilization 100% for Windows 2003 Server
Hi, I have some servers whose OS are Windows 2003 server with more than one SCSI harddisks. However, when I use opmanager to monitor the servers after serveral weeks. The Disk Utilization % always reaches 100%. When I delete the server and add the server again. It is OK again. For another Windows 2000 Servers, they are no problem at all. How can I fix this problem in Windows 2003 Servers? Thx Kevin
Cisco Catalyst 4006-sw problem
This switch is automatically detected as a router and then i can get the details of the CPU and Memory utilization. But When I change the category from router to switch i can get only memory utilization !! ....why is this happening. I tried changing the snmp oid string which the switch used when configured as router but still the TEST MONITOR shows error. PLEASE HELP ME !!!!!
OpManager Reports
When I try to display any of the following reports for Today, Yesterday, or Last 7 Days, I get a "No Data Available" message: * Servers by CPU Utilization * Servers by Memory Utilization * Servers by Disk Utilization * Servers by Rx Traffic * Servers by Tx Traffic * Servers by Rx Utilization * Servers by Servers by Tx Utilization For the most part, the data on the snapshot screens is fine and when I test the SNMP monitors, there is no problem. SNMP is running on the devices. Which MySQL table should
Server Snapshot Monitor icons disappearing
This one is kind of odd. I've been accessing monitors via the web client a lot today and suddently most of my monitors "disappeared". My resource monitor section shows I have no resource monitors, but I know they are there. In fact, the graphs are still being updated. I've attached a screen shot. Any ideas? Walt
struts-tiles
Why this Error is coming, while i am running my server org.apache.struts.tiles.TilesRequestProcessor Tiles definition factory found for request processor ''. I am new to struts.
Errors with my profiles
Hello all, I have a problem with profiles notification, for example after create one I want to edit it. When I click on edit in the notification profiles page, the webbrowser show me up errors which should be debug or not. (see the screenshot attached) I have already delete and recreate several of these profiles but I get always the same errors (see the screenshot). Thanks for yours answers.
Notification when Device comes back online
Is is possible to generate a notification when a device comes back online? Thanks, Chris
Dell PowerEdge MIB's
Hi Folks. We've been using opmanager for awhile and are having good results so far. Recently we have had some issues trying to get Dell MIBs to work. We create a custom monitor and it looks to us as though the Dell MIBs are "restricted" in terms of what we can check for. Any of the sections we really want to check (disk array failures, controller failures, etc) are not available when we drill down through the tree. Has anyone gotten this working with OpManager? Thanks for your help! --james
effective load average monitor
I'm working on trying to get an effective Load Average monitor working in OpManager. I did email support but the answer they sent back indicated they didn't really read my questions. Here are the relevant entries from my conf files. My command line works. If I run this command line on a Linux hosts, it gives me back correct looking output. If I run this through OpManager, I get unexpected output and nothing gets graphed. The gist of this is I'm trying to come up with a metric based on Load Average
Wrong IF names/numbers with Opmanager 5.5
We are testing OPmanager 5.5 and notice that the interface-Numbers/Names are wrong. If Opmanager queries an Fortigate he never get the internal interface and mix up if-names and the coresponding ports. So you end up with an interface wan2 with is the port wan1 and so on. Any ideas what there is going wrong ? 3 wan2 10 IF-xxx.xxx.xxx .... NA NA NA NA NA 4 dmz 105 IF-192.168.28.... NA NA NA NA NA 5 modem 0 IF-192.168.123... NA NA NA NA NA The FG60 has 5 Interfaces with Names Internal wan1 wan2 dmz
Exchange Info Store shows N/A Disk usage
I've seen similar problems on here but the recommended fixes havent worked for me. Whats happening is most of the monitors for the exchange addon work fine except for the Information Store, in particular interest to me is the Disk Space monitors. The disk space monitors say n/a. However, alot of the other features of the addon work. I tried running a command called wmiadap /f or something like that but still nothing.
Discovery
Discovery is detecting Cisco 3550 catalysts as Cisco 3100 or 3200 systems. SNMP is enabled. The default device database does include 3550 mibs. What is the problem?
no graph
HI there, I have most custom graphs working fine but two cannot find out why.. When testing from the test monitor button it works fine.... Monitor Name AN50SIN Protocol SNMP OID .1.3.6.1.4.1.10728.2.16.3.3.4.0 Monitor value 30 Units Has anyone had the some problem When using custom graphs
Escalation Email Rules & Email Profiles on LINUX
I've recently installed OpManager 5.6 on a Red Hat 9.0 server. I've encountered issues with Notifications & Escalations. I've created several Email Profile for Notifications but when I go back to edit any one of them, the screen just says "Error!" instead of showing the form to edit a profile. ALso when I attempt to edit an Alarm Escalation Rule, the browser reports that runtime error has occurred in line 1539 with the error: Object expected. If I change the To Email Address and click Save then go
Disabling Auto Discover
Hi I have done a subnet discovery, and kept the devices i want, and removed the ones i dont want (eg deleted the desktops, i dont want to manage these with OM). Is there a way to turn off automatic rediscovery - the maximum value is 15 days, I dont want the deleted devices re-appearing Deleting the subnet from discovery settings deletes all nodes in that subnet, so that wont work THanks Dave
Opmanager and Event Analyzer
Is anyone running Event Analyzer and Opmanager on the same machine? If I get Event Analyzer started then Opmanager seems to stop and Visa Versa.
Create Multiple Hard Drive Monitors?
Lets say I have two servers. The one is a fileserver, the other is a web server. The fileserver quickly adds files b/c people are constantly uploading files to it. The second doesn't. I can let the web server sit until it is 90% full before I have to even begin thinking about another array, but the fileserver I need to know about when it hits 75%. How do I create it so that both are tracked and not just one? Right now I have the WMI monitor set at 90%, but I also need it to be set at 75% for some
Opmanager and Event Manager
Is it possible to get event manager and op manager running on the same machine? when I get one working the other seems to stop.
Duplicate name in Partition Details of the Device (%) monito
Hello, I have a problem with this monitor. In my IBM AS/400 server I have implemented a IASP. x disk configured in my ASP and x disk in my IASP. The problem is, when i would add Partition Details of the Device (%) monitor, i have multi choices (partition) but ASP partition is named ASP and IASP partition is named ASP. If i check 2 ASP, I can see only 1. I delete and i can see the second. If i add 1 and after i want to add the second, I have this error that monitor already exist.
Fix for some DBfailed messages when Stats file is missing
Some posts note that OpManager won't start. A message that the DBFailed is displayed. This can happen after OpManager is restored from a backup. It is possible that one or more of the "stats" files which are part of the database were NOT backed up as they were open when the backup was made. Check the latest log files in <opmanager_installation>/logs one of which will list which DB "stats" files are missing. [try grep -i database *.log] To fix: A. Replace the missing "stats" file(s) by copying a working
Error that cant be cleared
I have an error on one of my servers and do not seem to be able to clear it: ID=4194 Source=COM+ Type=1 Message=The system has called a custom component and that component has failed and generated an exception. This indicates a problem with the custom component. Notify the de any ideas?
2 questions: remote client and archive reports..
I was wondering about two things recently: Is it possible to just install the client and point it to an opmanager server? The client has more functionality than the web client--such as creating and managing business views--and it is kind of cumbersome to have to remote control the opmanager server every time we need to perform those activities. Also, one we have a year's worth of data, how would one archive that data, yet still be able to report on it if necessary? The archiving of the db is easy
Switch Discovery
It takes 10-15 minutes to discover a layer 2 managed switch. Is that normal ?
opmanager loosing data
Hey guys we are using opmanager 5.6 on windows xp, how ever just recently we have been loosing data from our server monitoring? especially a linux boxes. Restarting opmanager fixes this. Regards
Brocade Fiberchannel Switch Custom Monitors
Can you guys help me setup some custom monitors for my Brocade Fiberchannel switch? I'd like to monitor port traffic and utilization via OpManager. Attached is the MIB. Thanks! Shawn
Service monitoring error
hi opmanager support, i have opmanager running currently in my network. one of my server is running smtp and surely http services...i've set my opmanager to monitor this service. then, my problem is..it keeps giving me an alarm that both service is down and when i check it at that particular server. the service is running fine. any idea?
Expand Monitors
Is there a way to have the monitors list expanded by default while viewing a device? If so, how do I go about setting it up? Thanks,
Business Views the device are display one on top on another
Suddenly in opmanager business view (in specific view of the client location), when I add a new device, all device are display one on top another. In the web client the device are display one on top another and In the apache client dont�appears the new device.
Load vendor mib
opmanager can not see speed of ports change on netgear gsm7224 switch correctly. I have vendor mib files. How do I use them to get opmanager to work correctly. How do I load them permanently and use them to add the switch and watch the ports everytime opmanager loads.
Next Page