Wake On Lan -- script
Hi, I would like to once-a-week turn on desktops in one of our remote locations, at around 11:30pm, in order for them to run virus scans and updates. I know that OpUtils includes the wake-on-lan feature, but is there any way this could be added to OpManager so that we could turn on some of our lesser-used machines? Thanks :)
PRINTERS WITH ERROR
Hey all I have monitor on PRINTERS all are responding and showing status 2 are showing constat ERROR and ALARM: "Device Active and Responding" why getting ALARM and ERROR when the device ACTIV and RESPONDING ?
OpManager 6.0 - problem with NLB cluster IP addresses
Hi, I've got two Windows Server 2003 boxes. Each has its own IP address, plus an NLB IP address on the same interface. When I discover the devices, only one device's interface appears on the device snapshot page. If I rediscover the second device, the interface graph disappears from the first. If I rediscover the first one, it disappears from the second one. etc. etc. etc. :) The IP address that gets used for the graph is the NLB IP address; is there any way I can alter the database to force the
Server Half-Down?
I'm having a problem where occasionally the problem we are having escapes OpManager's notice. This is what generally happens. One of our servers is rebooted and hangs during reboot, but OpManager can still ping the server, so it doesn't show any errors. When I attempt to do tests on the monitors, they report back that they couldn't communicate, and yet the view of the server shows green. If I am telling it to connect (say to CPU) and it can't and is giving me red, shouldn't the status notice just
Cannot monitor SQL2k
Hi, I've read through the different posts in here, and done everything that peaople suggest. Apparently I'm not the only one with this problem. When adding MSSQL monitoring in OpManager 6.0 I do not get a response from the server when testing them. I've started the SQLAgent service that has been suggested. Does anyone have a similar problem? Rasmus
SQL Server - The Monitor did not respond to the test request
I have a SQL Server and we want check the SQL Information. We have activat SNMP and al is running if we Check Memory and other things. If we want Monitor SQL Function than we became this Message: The Monitor did not respond to the test request . Monitor Name MssqlInfoUserConnections Protocol SNMP OID .1.3.6.1.4.1.311.1.4.1.1.2.1.16 The Server is in a other Subnet (195.125.1.....) The OPManager is in (192.168.100...) If I Check a Server in the same Subnet than all is running fine. Can you help me?
Version 6.0 - CLI CPU monitor issue...
I have CLI based CPU resource monitor turned on for some of our Linux systems. These are older generation quad (4) processor systems. Upto version 5.6 i believe a single aggregate value was being reported for all the 4 processors and with the thresholds enabled it use to report violations after that aggregate value exceeds 90 (as i have it setup). Now with the new version each processor is monitored seperately (which is kind of nice) but even if one of the processor exceeds the threshold it generates
How I can remove Application Manger from start up
hi, there I have downloaded a free version of Application Manager, it works great. I was just wondering if there is a way to remove application manager from start up, i do not want it running when i start my mahcine. Please advise. Thanks, HappyGoogle
Slow logon
1. It takes so long long time to process when i submit the username & password into the web interface and sometimes i can not loged in. How do i check the root of problem? 2. Is there any way to configure more than 1 user under url monitoring
OpManager: Device discovery; Duplicate Devices
I completed a device discovery, and now I have a ton of routers/switches in separate categories. The issue is the devices have about 10-20 separate networks configured on each and now I have 10-20 router icons in different categories (Router, Switch, Desktop) for the same device. They are all listed by IP. Questions: 1. Is there a quick way to fix this? 2. Does OpManager know how to discover devices without causing duplicate entries? 3. Do I have to delete the devices and add them in manually? 4.
Dependency handling problem
The dependency section of OpManager does not appear to handle faults in a WAN well where dependencies are declared. To expand�. We have a network with several offices (with dozens of remote servers) and also multiple remote sites all linked via a wireless / vpn wan solution. Opmanager does monitor the network well, no problem, but the alerting is a disaster. Basically a simplified example: Our main office is Local Office - (this hosts OpManager) Local office Wireless point | | Wireless Repeater |
SNMP proxies and virtual server monitoring
Hi, We're considering OpManager for managing corporate servers we have at various customer sites across Europe. These servers are all behind firewalls with dedicated (TCP) port openings to us for management purposes. This is fairly complex, and I'm interested in how we can accommodate/customize OpManager to fit the bill. For alarms I imagine we have to use SNMP proxies and have OpManager receive traps from these proxies locally on the same network as the OpManager server resides (possible localhost).
Change monitoring intervalls
Hi, after installing the upgrade pack of OPMANGER (Version 6000) it is no longer possible to changethe monitoring intervall. There is alwasy shown the last items. Bethes
6.0 Splash Screen
I did the upgrade to 6.0 from 5.6. Stuff seems to be going good so far but the initial login web page still has the old 5.6 screen, did I do something wrong on the install?
Service Desk Plus link missing for Domain Controllers
usually, there is a link to jump to hardware details/etc. directly from OpManager. For the new Domain Controllers, the link is no longer there. Thanks.
Postgresql support
Hi, I see that your software supports Mysql monitoring but not postgresql. Is it planned to support it or anybody using custom monitors to monitor the health of postgresql?
Exchange monitor stopped working
I've upgraded from 5604 to 6000 and now my exchange monitors all show N/A. I'm using username@domain.com for authentication for the server. Thanks!
can't add non-snmp host in OpManager 6
It won't let me leave the snmp community/ports blank, and if I put something in there it sits there about 10 minutes and says it added the host. When I search for the host it does not exist. Something similar is hapening wih rescanning non-snmp hosts -- it sits there for 10 minutes and doesn't change anything.
Not showing downtime correctly
I had a device that OpManager said was down for the past 14 hours, however during that same time I was able to ping the device. I removed the device and re-added it again, that seemed to fix the status.....why would OPManager have done this?
Upgrade Pack 6.0
I shut down Opmanager completly, insureing that MySQLD, Java, etc. were all closed. I started Updatemanager.bat. Program loaded fine, I selected the upgrade patch and then hit finish. New window pop ups to show the status, but nothing happens. I killed the java.exe program and proceded to shut down all non-essential services. Again the same issue, the patch just hangs. After 10 minutes again I just killed the program. Any ideas short of a new install?
sending Eventlogs per mail dosn't work
hy everybody, i monitor a Windows Event log with opmanager. I would like to send a mail, when a event with id 8001 appear in windows event log. Probelm is, it comes no mail. I don't understand it. opmanager has all rights to monitor the watching server. the notification profile and the windows event log rules under the admin screen function good. i verify this rules with an other server, and it works. a mail comes out when the event 8001 was emerge. just for one server didn't work this rule. what
CPU USAGE % PROBLEM
HI ALL This is to notify that at present we r using OPmanager software for monitoring purpose. All the windows servers , switch , gateway r showing proper utilization in OPmanager. But same case is not appilicable to linux server which we have in our location. Operating system is Debian on all servers. all servers r showing only Mem & disk usage , Not cpu usage % . it is always showing 0%. i have gone through ur website . i found there that there is some problem with cpu measurement . how can we
Opmanager 6.0 Create Problem
I m trying to install Opmanager 6.0 pro edittion into my linux box , after installation when i m trying to start the server service , it giving error "Failed to estabilish connection with web server gracefully shutting down opmanager." pls support
custom and new vendor SNMP monitors appending .0 to oid
In OpManager 6, monitors created as type "node" somehow get a .0 added to the end of the specified OID.
WMI based monitors Windows 2003 Server
Hi, I'm trying to monitor a few Windows 2003 Server boxes, but when I e.g. add a CPU monitor and run a test, it fails with: Possible reasons 1. The device might be down. 2. The username and password provided for this device might be wrong. 3. The domain password for this device was not provided 4. The domain password for this device might be wrong The credentials /are/ correct! When I run the scripts in conf/application/scripts on the command line from the box running OpManager they seem to work
Notifications/Run program with option "when cleared&quo
Hello, I've created two programs for notification. The first, that has all options selected without the option "when the alarm is cleared"!!! The second one should selected only the option "when the alarm is cleared", but this doesn't work. After saving the tab, this checkbox for that option is empty! I need an external Programm, that should only run when a alarm is cleard. How do I get this work? greetings from germany andre
Scheduled Reports in OpManager 6.0
There are two bugs that seem to been in the scheduled reporting. 1. When you create a scheduled report and do not select a business view. It will still select a business view for the TOP N Reports. I have created a business view to solve this issue. But, there are nodes that I do not wish to create a business view to create a scheduled report. 2. The Volumes with the Least Free Space report is the same report as the Volume with the most free space. The reports run fine under the reports menu, but
Domain Controller credentials
Hi, No matter what I put as username&password for a domain controller, it always seems to use the account that OpManager is running as to query the server. Needless to say, this causes lots of security alerts! alec
Cisco Aironet
I just got a new Cisco Aironet network setup but I am getting these error messages from all the access points, anyone know what they mean? .1.3.6.1.4.1.9.9.41.1.2.3.1.2.84: DOT11, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.84: 5, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.84: MAXRETRIES, .1.3.6.1.4.1.9.9.41.1.2.3.1.5.84: Packet to client 0013.ce6e.8002 reached m .1.3.6.1.4.1.9.9.41.1.2.3.1.2.110: DOT11, .1.3.6.1.4.1.9.9.41.1.2.3.1.3.110: 5, .1.3.6.1.4.1.9.9.41.1.2.3.1.4.110: MAXRETRIES, .1.3.6.1.4.1.9.9.41.1.2.3.1.5.110:
Looking to upgrade to 6.0
Thanks for the new release! There are a number of the new features that we will love. I have a question though, currently we use the java client to project our "network view" onto a wall in our office. We are able to see the network view and a list of the active alarms, will there be a way for us to do this in the new version? I would love to have a customizable page where you could pick certain things that were on it ie, a business view + active alarms. thanks, Mark
MySQL
Hi I want to be able to access the mysql database over the network which means i will have to edit the mysql start up script and bind an ip address to it and modify the databaseparameters.conf file so that Opmanager will be able to connect is there any other files apart from the mysql shutdown script that i will need to edit? If i also set the password in the databaseparameters.conf file is this all i need to do? Or I am going to cause a huge number of issues by doing this? I basically want to access
server not able to detect windows 2003 server client.
server not able to detect windows 2003 server client. opmanager is installed on w2k3. please advise mkhan89@hotmail.com
ACT Networks - SDM-9400
using the OpManager and want to manage a ACT Networks - SDM-9400 router how must be defined (device type) in OpManager? thanks in advance
Line plot problem on custom graphs
Hi, Just want to confirm with people a possible bug aka feature we don't want. When looking at the graphs for a monitor we can enter in a range of custom dates and it will display a area filled graph for that range. Then if you click on 'line graph' button it reverts to the original last 24 hour graph. This is a shame as the line graph option prints much better than the are filled graph.
annoying startup issue
for 2 weeks, i was trying to install opmanager v5.6 successfully but howcome i couldnt get manage to install it or i have to say to start it. -Tried in 2 Windows 2003 Standart Server machines (fully patched and registered), 2 Windows XP machines (these are IBM laptops,fully patched and registered) -The installation phase go smoothly i choose the pro edition 30day trial version... -After the installation finished the op manager wanted to start up the service-i click ok -it succesfully open the iexplorer
Monitor total up/down bandwidth
What would be the best solution to accomplish this. We have a DS3 and if we go over our limit of 20MB then we are billed extra by our ISP. My boss wants to be able to monitor this. Does this software provide this capability and if so, how can I set this up.
OpManager will not start
Running OpManager on my Windows XP laptop. It has been running in conjunction with SD+ now for a couple of months. However a couple of days ago OpManager refused to start. It has been that way since. I have tried starting it from the CLI as well. This is all I get: C:\Program Files\AdventNet\ME\OpManager\bin>startopmanagerserver Windows XP This OpManager has been licensed to Evaluation User. Starting AdventNet ManageEngine Server Modules, please wait Process : DBServer [ FAILED ] Process : OpManagerStatusProcess
Disk Utilization Graph no show
Hi, I have a problem with graphs, just the one that correspond to Disk Utilization is not showing and for moments the Memory Utilizacion Graph dissapears, I don't know why, I wonder if the reason is that my device have 3 hard disks??, and if it is so, why the other graph appears and dissapears once in a while? Thank's
Exchange Monitor
I just upgraded to OpManager 6.0 and for the life of me I can not seem to be able to figure out how to use the Exchange Monitor. I had it in the 5.6 version but when I go to monitor applications all I have is for 5.5 and in my about it says not registered.
Hard drive Compatibility
How to enable S.M.A.R.T hard drive.
Next Page