Logon/header customization
Hey I have now and again seen posts about customizing the logon screen and the header/logo (the top stripy lines area up the top). From my understanding this can not be done (by the user), is this a feature expected to be released in future releases of opmanager? Is it on the roadmap and if so is it expected this year? Thank you
Netscreen firewall+adsl modem
Hi, I have Juniper Netscreen 5Gt it is as a dsl modem and firewall. it is set as a firewall in my Op Manager but I can get its monitors. I also entered a password for the firewall but it is still not displaying. could you help me.
problem with creating a business view
Hi, I have a lot of business views in mapmaker. Now i have create a business view which shown in the business view map but i can't see it in the business view tree. How can i solve this problem? Thanks Emti
Alert for Service Down
I have configured in one profile 3 polls for Device misses. This configuration this functioning however the services that are inside of this device soon sends me an alert email of after first fall. How to configure so that the service alarm is only sent after the third falls? I am using Opmanager 6 Build 6003. Thanks !
WMI Help Needed
Hi, I am doing some testing with OpManager and I keep getting Error # User credentials cannot be used for local connections while trying to enable any type of WMI monitoring. I have enabled dcom, rpc, wmi. I have set up the security settings ok. I am not running on a domain. SNMP works fine but I'd like to be able to monitor particular services on a XP box. tia
No data in Report - All Servers Availability Report
Hello. Why isn't there any data in All Servers Availability Report ?? OpManager have been running for a while now, and there is no data in the report. All of my devices is SNMP enabled. How can I correct this ?
Make a server not a domain controller
Hello, I have downloaded the trial version of OpManager and wanted to know if it was possible to monitor a domain controller, but monitor it just as a server? I have everything setup correctly. I have tried to change it from a DC to a server, but it keeps reverting back. I do not need to use any of the tools in the AD plugin. IS there a setting to stop this from happening?
Threshold Explaination...
Hi...can anybody help me to understand how to set the right threshold number for monitoring a switch port? what does 95th mean? when i set 100 for the threshold limit...is 100 = 100kbs? :roll: Hope u guys can help me...
Just two little questions...
I would really appreciate anybody's help. I'm carrying two doubts these days: 1- Trying to take a closer look to one of my Cisco devices, a switch, I couldn't see any other graphic besides the one that shows the memory used. 2- The Controls over iSeries equipment are not working, do I have to configure something on the servers? Thank you!
problem loading snmp trap processor
I'm trying to load a trap from CISCO-C2900-MIB-V1SMI which is depends on CISCO-SMI,but keep this message "IMPORTS failed: Could not open file F:/Program Files/AdventNet/ME/OpManager/./mibs/CISCO-SMI" I don't have much idea whether the defintions are correct and any help is appreciated
Need help ! problem to restore OpManager DB
Hi, I need your help to restore our OpManager server. After a break down with the OpManager Server, I had setting up a new server with same release (OpManager 5.5 + Service pack 6000). I have only a ntbackup from my old server with directory OpManager. I can restore ..\OpManager\conf directory and start again OpManager => it works But if try to restore data (..\OpManager\MySql\Data\OpManager) , server don't start, there's an error with DB fialed. If I restore the data directory in a other directory
cisco 2620 config problem
Hi, I have cisco 2620 router.. I am not able to enter into the priviledged mode.. when i try to enter in it giving " en " command, i am not prompted for the password, it give " % Error in authentication " can someone guide me.....
Error using MapMaker on OPM6
Hi all, I tried to make a bussiness view, using a jpeg image. In the MapMaker application running in the server, the bussiness view works fine, but when I try to see the view on my machine with the web client, OPM displays an error! without more info. Thanks in advance. Daniel Lopez.
submap in business view
Hi, question; Can i create a submap under a business view in opmanager mapmaker. Example; Business view ∟ business view 1 ∟ business view 2 Thanks
MIB Browser in web client:build 6004-BROKEN!!
Anytime I attempt to load mibs using mib browser I get the following error "Exception:Reading/Parsing MIB:java.io.FileNotFoundException: Could not open file F:/Program" It works fine if I use the executable and the feature worked in Op5. I'm using a fully licensed version.Please help :cry:
OPManager and Xavi X3102r
Hi, We from our company have some problems with the OPManager and two Xavi X3102r switches. We are really new to SNMP and managment softwares belonging to it. 1. The OPManager can not read out the device type of the Xavi X3102r. There is always "Unknown" declared as device type. What do I have to do to get this right? 2. I can read out more information with the MIB Browser integrated in the OPManager, then with the OPManager itself. That�s a really funny thing. For example, the MIB Browser can show
OpManager TFTP Server conflicts with 3Com TFTP Win2k3
OpManager's TFTP server takes over port 69 keeping my 3Com TFTP server from fulfilling requests. I need to either change the TFTP server in OpManager, know the diretory that is used for file storage for TFTP in OpManager, or stop OpManager from loading a TFTP Server. Can someone advise?
Error retrieving dials from several cisco switches
Dear Support, I have a list of 50 switches Cisco Catalyst from the same model (series 2900) with the same IOS version, and some of them gives me info: Two of them gives me CPU, memory and Backplane Some of them gives the CPU and memory Other devices only CPU A few only the backplane utilization For Memory dial, some times uses .1.3.6.1.2.1.25.5.1.1.2 OID (MemoryUtilization) and for other ones uses (.1.3.6.1.4.1.9.9.48.1.1.1.5.1*100)/(.1.3.6.1.4.1.9.9.48.1.1.1.5.1+.1.3.6.1.4.1.9.9.48.1.1.1.6.1) (CiscoMemoryUtilization)
WMI v SNMP - Disk Space Monitoring
Hi All. I am just about to add disk usage/free monitors to all my servers (some 80 of them) and was wondering what monitoring method was best to use, SNMP or WMI? They both work, but which would have the least overhead on the system, both the OpManager server and the remote server. Some of my servers are across slow links, so network traffic needs to be considered too. A feature I think would be great in OpManager is to be able to add Free/Used resource monitors to all physical disks in all servers,
Using NetFlow
I am using my NetFlow and have noticed a tremendous amount of traffic going to a single host. The IP is "205.161.6.57" and the protocol is HTTP. I have tried to connect to this host but can not. Also I can't find out what it is? Can anyone offer any advice on this?
Auto start the OPManager Client on the boot
I�m using the OPManager and I have to say that this is a really good program. My question is : How can i disable the automatic open of the client on the opmanager server ? I wana start the opmanager server only and not the client automaticaly on the server PC.
discovery community string
Hi Is there a way to configure each network subnet to be discovered/rediscovered with a different SNMP community string? The way OpManager works now during discovery it tries all predefined cama seperated community strings until one matches. This is causing the devices to generate and send authentication failure traps which is causing annoyance to the security administrators. Thanks Ramzi
cant get client PC's data....
hi, just installed OPManager 6 (the free test version) Network: 2x windows Server 2003, clients on XP pro (all patched up) TCP/IP network. I cant seem to get any info off the clients, they seem to be detected. Ive added the SMNP services to the clients, so OPm detects them ok. But no monitoring works or installed software etc. Also non of them have a blue star next to them (my own one does) Ive added SMNP port 161 to the windows firewall (we have a hardware firewall but thats only to the outside
Re-Discovery process
OpManager scans for new devices during each Re-Discovery process. How do you turn off Re-Discovery or have it check every 30 days rather than 15 days. It would be nice to be able to turn off or more than 15 days of a Re-Discovery. Thanks :?:
Cisco QOS Monitoring
Hi, How do you configure OpManager to monitor the cisco QOS such as web and smtp traffic. I have already set the policy classes and policy maps on the cisco router but does OpManager have the the required MIBs Thanks Ramzi
Monitoring Windows Disk Space
He guys, ive just installed the latest version of this absolutely fantastic app. I got through monitoring so much more than ive ever been able to before such as exchange data and the great way everything is displayed. My only problem, the Disk space monitor for my windows servers (with WMI) is only monitoring my C: drive, i partition like a crazy man and have up to 4 partitions (disk arrays) that are on servers. So how do i get it to (preferably) monitor all of them or at least specify the disk its
Device Name not showing up on Reports
When I run a report, (any report), the device name is only populated by the ip address not the device name that I have specified for the object. How/where do I correct this problem? Robert
timeout
Hello everyone, I am having a login timeout issue with OP Manager. Evrytime i login to opmanger, it kicks me out after a short tme, such as 3-4 mins, and I have to login again. Sometimes it kicks me out sooner. I'm wondering if anyone else has this problem and if there is a fix. Also, does it matter if there is only one account for OP Manager, and if two people are logged in using that account, if one person would kick out the other?? Any help would be appreciated.... Thanks.
SQL and Exchange
I was wondering if anyone can recommend the best monitors and settings to monitor Exchange and SQL servers. I have been trying to monitor them the best way and I don't know how.
What config file stores custom monitor associations in MSP
Where are the device configurations stored? Specifically what I am looking for is where MSP stores the custom monitor associated with a specific device. I know the monitors themselves are stored in the opmanager_graphInfo.xml. But once you apply a monitor to a device where is that info stored? Robert
OpManager lib issues on startup
I'm having issues getting OpManager to start on 64-bit Red Hat Enterprise 4 system. I've narrowed the problem down to the Webserver itself. [root@dev1 apache]# ./StartWebSvr.sh bin/httpd: error while loading shared libraries: libgdbm.so.2: cannot open shared object file: No such file or directory The files exist, and their permissions are correct: [root@dev1 apache]# slocate libgdbm.so.2 /opt/AdventNet/ME/OpManager/lib/libgdbm.so.2 /opt/AdventNet/ME/OpManager/lib/libgdbm.so.2.0.0 /usr/lib64/libgdbm.so.2
Using OpManager with UNIX, Oracle on UNIX, and Maestro
Can anyone direct us toward any information available on using OpManager with UNIX, Oracle databases (running on UNIX), and Maestro? OpManager is a fine monitoring tool for Windows applications and we're interested in getting the most out of it as possible, if it can do even more. Thanks, -Ryan
Email Alerts
Hello, I am having problems with email alerts. I have configured the mail settings and when I send a test message everything works fine, but when an alert triggers a message my email server rejects it as a relay message. I have configured my email server to accept relay from the OpManager server but still fails. I am using GroupWise 7.0 I tried using another SMTP server (IIS) and also fails. OpManager is installed on Windows 2000 professional sp4. Previously I installed in on Windows XP for testing
MIB Browser in web client:build 6004-BROKEN!!
Whenever I try to load mibs using the web client I keep getting the following error "Exception:Reading/Parsing MIB:java.io.FileNotFoundException: Could not open file F:/Program" using the standalone browser works, please help :cry:
Features available in evaluation copy and free edition
For Web Application Testing The evaluation license is valid only for 15 days from the date of installation after which it moves to the Free Edition Which all are the features available in evaluation license and not in free edition or are the same. If different pl. give me the list of features available in evaluation license copy and free edition.
threshold range
the problem with thresholds is there's no range option: take UPSInputLineVoltage for example you can only have one (yes u could make a different custom monitor) but say you need an alarm when it's less than x or greater than x there's no easy way to do this
Link not working
Hello, In one of your forums, you have a link to a page that helps with integrating OPManger and Servicedesk Plus. The link: http://manageengine.adventnet.com/products/opmanager/help/user_guide/using_web_client/wc_configuring_notifications/servicedesk_integ.htmlurl does not work as in it returns PAGE NOT FOUND. Can you plese update this post with the proper link?
Network diagram view
Hi, I've just started to use this great piece of software and I realise there is a network map type of view but I was wondering (maybe I'm missing something here, did a search could not find exactly what I was after). I was after a more detailed network diagram. Like similar to those ones of Nagios as this would allow me to see dependencies easier, rather than having to click into X network everytime. tia.
Can not display disk utilization for linux.
I have installed OpManager 6.0 on Windows. I have Linux PC and want to monitor resourse utilization of PC. Now, OpManager 6.0 is able to display CPU and Memory Utilization. But It still can not display Disk Utilization. Do you have any solution to solve this problem? Thanks for help.
mapmaker is too bad
Can not make one big map Can not move multi object at the same time ......
Next Page