Disk Monitor SNMP or WMI
I would like to be able to define a monitor with proper thresholds in the admin section and apply that to all servers. The problem I have is I setup a threshold but the A drive and CDrom drive keep reporting 0mb free and kicking off an alert. Is there a way to exclude these devices on a global level or do I have to setup a resource monitor on each server individually. Your help is appreciated. -Tony
Custom monitir problem
Hello! I'm trying to create a custom monitor for my cisco router. I've created the custom monitor with OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.1 and attached it to my device. But it doesn't work. If I try to test monitor I receive the following explanation: The Monitor did not respond to the test request Protocol SNMP OID 1.3.6.1.4.1.9.9.42.1.2.10.1.1.1.0 What's wrong with it and where on Earth did it get .0 at the end? Also I would like to gather data from some external script. Is it possible or will
Problem adding interface to a device
Hi, When I go to a server device and I click on rediscovery button from interface, the interface is detected. I check the box for the interface and I click on the add button and I receive a messager for successully added the interface to the device and the page is refresh and the interface is not displayed. The server is a Windows 2003. When I choose a server in the Domain Controller with the AD monitor, I can't discover and add interface. What is wrong ? Thanks, Steve
Monitoring MySQL
Anyone have a .mib file i can load for use in the mib browser?
F5 Big-IP Products
Any possibility of supporting the F5 Big-IP load balancing products? They use wierd SNMP stuff, OIDs like .1.3.6.1.4.1.3375.2.2.10.2.3.1.1 which include 3375 (I think SNMP only usually allows single byte, and this would be an integer). I have tried adding this to OpManager but it always fails. I can get some basic snmp info from the device, but 99% of its stuff can't be accessed due the way F5 has implemented snmp. It actually appears that they prefer getting snmp type values from HTTP instead of
problem in monitoring checpoint (update)
using chkpnt.mib (that i got from http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002636073)in mib browser i can get information from checkpoint firewall-1 NG AI R55 but it s not work when i added device (star not appear) At this added device i cant get any information then i try to add checkpoint firewall-1 NG. it s surprisely work !! Is this problem because of version of checkpoint firewall or else? how to fix this problem ? please help
Google Maps in Non-MSP versions?
When will Google maps be added to the non-MSP versions of OpManager?
Does it scale?
As a consultant, I'm considering OpManager for a company with 300 intel servers, 1,000 WAN links, 3 EMC, MS SQL servers, Citrix servers, Cisco routers, Cisco and 3Com switches. Does it scale to such environment? Or should I look for solutions from HP, IBM, CA etc?
Network Discovery Question (Opmgr MSP)
I added network 10.128.128.0/20 to be auto-discovered. It did discover the network devices just fine. However, it also added many unmanaged /24 subnets that fall with the larger /20 network range that was specified (see below). Is this normal behavior? I'm not sure why I would need the smaller network? Can I delete them or should I just ignore? 10.128.128.0 255.255.240.0 managed <-- this is the /20 I added 10.128.134.0 255.255.255.0 unmanaged <-- OpManager added all the /24's 10.128.135.0 255.255.255.0
BUG: Business views
Since the new release my Business views that have shortcut links to other business views do not show the correct info in the balloon over. Example.. I have a map of the state of New York and each of the large cities has a shortcut circle to that city. WHen you mouse over the city it does not get you the info for the shortcut, instead you get Webclient.map.baloon.viewdetails at the top. I have attached a screenshot.
Opmanager in a Mac OS X system
Am interested in hearing from Mac OS systems using AdventNet products.
Internal Server Error
We get a problem at the below error. Anyone can help me? Thanks a lot Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. --------------------------------------------------------------------------------
alert.filters
I have made some new alerts-and they are running fine-modifying my DataManagement.xml to not compile stats so frequently...i also ran accross alerts.filters -which only has the original 'Play Sound" alert in it -does this file not get updated untill a proper shutdown/restart? -i could have sworn i've restarted opmanager since then-however not 'smooth' shutdowns of the service-just box reboots....yet my alerts still work so is the alert data stored elseware now?
Monitor Directory / Share
Is it possible to monitor the size of directories or shares at a partition of a server (compaq)?
Notification
Hi I have set up OpManager and set up to notify me when there a system down. I checked my Mail server settings and both of mail address works well when I have it run it as a test. When a system is down I am not getting any email at all or any notification. I am seeing on the OPmanager that it has an alarm but no email. I recreated all the setting twice still same.
How to customize default display(CPU%,mem%,disk%)to be other
i want to customize display to show information from custom monitor How to do it ? Please help
Nee help prefered in german
I have installed the OPManager on my Root server and agree if I liked to begin him the following announcement: :/opt/AdventNet/ME/OpManager/bin # ./StartOpManagerServer.sh inside addon check Unable to start Mysql daemon Unable to create database Exiting OpManager I thank for help. ------------------------------------ Ich habe auf meinem Root-Server den OPManager installiert und bekomme, wenn ich ihn starten m�chte folgende Meldung: :/opt/AdventNet/ME/OpManager/bin # ./StartOpManagerServer.sh inside
OpManager 6010 BAD performance
After installing the new build of OpManager, 6010, my PC has been encountering major CPU and Memory utilization issues. In the Task Manager, I see two instances of Apache.exe and multiple instances of cscript.exe that causes the CPU to shoot up to 100% utililization and the high memory usage. Can someone tell me if they have encounter a similar issue or I need to do something to fix this problem? Thanks, Zeke Khirbash
How To Monitor Wans's links with PING ?
Hi all ! I want to monitor the several my wan's links with PING for link's delay. How to ? Thanks in advance, S�rgio
OPManager won't load, stuck at
I used OPManager for about 1 week. Now it doesn't start anymore, i'm stuck at 'Configuration completed...' in the startup screen. Here's some logfiles, hope this helps: Wrapper.log STATUS | wrapper | 2006/10/09 09:12:46 | --> Wrapper Started as Service STATUS | wrapper | 2006/10/09 09:12:47 | Launching a JVM... INFO | jvm 1 | 2006/10/09 09:12:48 | Wrapper (Version 3.1.1) http://wrapper.tanukisoftware.org INFO | jvm 1 | 2006/10/09 09:12:48 | INFO | jvm 1 | 2006/10/09 09:12:49 | inside addon check
Can�t use it
After the login page, i can see the dash board alright but right after any click (menu or not) the opmanager goes to login page again and the process goes on the same... :?:
MySQL access changed since service pack?
Did the service pack for OpManager reset MYSQL access from outside sources? Since the upgrade I cannot access the OpManagerDB from a outside source.
MSP Database backup
Hello, I am having problems running the backupdb.bat script on the MSP probes. Attached is a file with the error outputs that I get. I am using OpManager MSP 6002. Any help will be appreciated. Gustavo Verde
Ports revisited
Sorry for the newbie type question: When setting up the ports for OpManager MSP am I supposed to do the following?: OpManager collector: open a port for the probes to connect back on. OpManager probes: open a port for the local users to to access the OpManager data?
Email Alert: show display name and ip address
When a service goes down and we receive an email, it shows the server's ip address instead of the display name. I believe the "$source" variable is replaced with the IP address. Is there a variable we can insert that will map to the display name of the machine? Maybe "$displayname" instead of source? We don't have every IP addressed memorized so seeing that as the only value doesn't help us that much. Ideally we'd like to see both the IP address and the display name.
Email Notification
Hi I have set up OpManager and set up to notify me when there a system down. I checked my Mail server settings and both of mail address works well when I have it run it as a test. When a system is down I am not getting any email at all or any notification. I am seeing on the OPmanager that it has an alarm but no email.
BUG: Always alert if one swith port is down
I moved one server out off network because it is useless, so the status of switch port became red and alert was generated. I cleared the alert, and the status of the switch become normal, but same alert will repeat generated again after a period of time. Source: 192.168.0.34 Import: Trouble Last: Oct 11,2006 02:16:48 PM Message:Port 10111 is down Last, I found out the reason, if the alert is cleared, the status of that port will become green, and the status will change from green to red at next discovery
Help
I am experiencing a problem with opmanager. We manage several devices on our network. Recently, we have had to change the IP addresses of a number of them. I expected that as the devices' IP addresses change, they would be flagged by opmanager as being down. However, that is not the case. The devices' status is not flagged as being down, and their ips remain the same in opmanager, even though they cannot be reached using their old ips. Is there something I am missing here? Please help.
Disk Usage Graph- Reversed
I have a couple servers that the Disk Usage graph is reporting 20% free and 80% used. When it shoudl be the other way around.. Anythoughts to this.. We did upgrade to the 6.0 but I didn't notice it that way befor so can't say if it has always been doing this or not. Any Thoughts
Partition Usage with WMI
Hello, is it possible to read out the disk usage of each partition with WMI? I know, that it works with SNMP, but i have a win nt machine without SP6 and we can't install SNMP on it. Thanks Rilli
Is it possible to do an "alarm escalation rule" to
Is it possible to select an SMS (number or profile) in stead of an email address in the alert escalation? - It looks like it is only possible with an emailadress, wich is a pity because your new SMS system with a nokia phone and a serial cable works EXCELLENT :-)
No blue star for SNMP
Hello, i don't see the blue star in the corner of my win2000 and win2003 servers for SNMP! but i get CPU %, Memory % and Disk % over SNMP. at some server i also see in the asset details the RAM and Disk capacity, but i can't see the network interfaces, when i rediscover an interface, then it says: "interface added successfully" but there no interface after. I also set the correct login passwords and the public community I have version 6010 Could anybody say, what i have to do? Thanks
Alarm Escalation
Hi, is there a way to configure the Alarm Escalation option to send SMS or Paging rather than just email. We have the option to do that in the Notification Profile but not the Alarm Escalation Thanks Ramzi
problem in checkpoint monitoring
i installed checkpoint snmp extension on port 165 using mib browser i can completely get information from chkpnt.mib but adding device at port 165 I cant get any information and star at device doesn't appear. then i try to add another version of checkpoint firewall device , star appear but i still cant get any information except traffic interface information .So i add some custom monitor and change custom monitor port using opmanager-sql command . i found that packet was accept by firewall device
Active directory and network scanning
Im kind of new to this so i can really use some help. I tried to integrate my Active directory. it scans and sees my domains but it doesnt import the users. it says that they were failed. also im trying to scan my network but it keeps telling me "No response received from workstation. Probably the workstation might be switched off or does not exist." What should i do?? Also if u have any other pointers that may be useful please feel free.
Failed to establish connection with web server
Failed to establish connection with web server. Running on a fedora core- Also, I have no StartWebSvr.sh in the apache folder.... This is what I get: Starting AdventNet ManageEngine Server Modules, please wait Process : StartTelnetClient [ Started ] Process : OpManagerStatusProcess [ Started ] Process : AuthMgr [ Started ] Process : NmsPolicyMgr [ Started ] Process : OpManagerRunApacheExeModule [ Started ] Process : NMSMServer [ Started ] Process : UserConfigProcess [ Started ] Process : NmsAuthenticationManager
Device Icon Size
Hello All I am wondering , is it possible to change the device icon size to be bigger then 48*48 pixels I was trying to add something bigger , but I can't see it :-( Thanks in advance Haim
How do I add probes to Google Maps
I love the idea of the google map integration. How do I add the probes/devices to the map? Do I have to do it through google? Or do I do it through OpManager MSP? Thanks, Robert
Linux CPU % not working
I have the same problem on all my Linux systems with OpManager 6 SP1, they all return a CPU usage of -1%. This is because the command OpManager uses does not work. One system (Fedora 2) returns just text. root@host [~]# top b n 1 | grep 'CPU[0-9]* states:' CPU states: cpu user nice system irq softirq iowait idle another (Fedora Core 4) [root@suse ~]# top b n 1 | grep 'CPU[0-9]* states:' [root@suse ~]# returns nothing because the text is not found. Any advice ? Can we even change these commands, but
SNMP CPU/Mem/Disk utilization not working on RedHat ES 4.0
Hello, Can't quite figure out why I can't see the CPU, DISK and Memory info using the standard SNMP query. I've made the changes to enable the view. Please check the attached snmp.txt file.
Next Page