OpManager 6 using MySQL > 4.0
Hi I've been using OpManager 6 for a few weeks and as well as the built in reports have been writing VBA macros to query the database. I've discovered that a query (using the max() function) wasn't displaying the data it should be and a google search revealed that it is probably down to the version of MySQL being 4.0. I've tried to install MySQL v 4.1.22 on this server and have set it to use a different port. My plan was then to point Opmanager system to use this server by modifying the database_params.conf
MSP 6004 Remote Control
Hi I just upgraded to MSP 6004. I see the new Remote Control feature. When I click on it I get an error that an agent has not been installed. How do I enable this feature?
MAP LINK ALREADY EXSISTS (ERROR)
HELLO , i have porblem with creating map link in business view when i try to create link between 2 devices its gives me error that link is already exsists, i have deleted the device and readded it i have not deleted the link before deleting the device i think thats why it gives me the error , also i can see the broken link on the left corner of the business view,, But now i dont know how to get rid of this broken link and create again link..plz guide me to this...is there anysolution to this,, thx
Op manager with HPUX and Catalyst 3750
Hi opmanager support, I want to integrate opmanager to my network but i need to now if it's works fine with my devices, I installed a 30 day evaluation opmanager 6.0 build 6016, and started to tryed but i found some issues that i want to resolve before I integarate to the monitoring system, 1st With the catalyst 3750, the backplane utilization bar is always showing 0%, so I think that is not working correctly 2nd With HPUX servers using HPUX 11.11 OS the CPU Utilization is showing -1% and Memory
Is OpManager right for me ?
Hi, Im looking for a monitoring/alerting package that will monitor everything from ping times & availability of a server, to service status on a server, uptime, disk space, ram usage etc, as well the ability to email and sms alerts on outages. Ideally the package would support agents on remote machines as the monitoring server and the monitored server will be on seperate networks/domains/subnets etc (ie my server will be at a co-lo centre and the client server being monitored will be on the otherside
OpManager 7 CISCO Switch to Switch Link Notworking
When we use CISCO Switches to link the interfaces each other , doesn't make any impact where as Link between CISCO switch and HP Server does well.
Monitoring switches
Hello, I want to monitor some switches with the latest version of opmanager (build 7002) Sometimes I do get an graphic of data on some ports. But most of the ports not. SNMP is good as I am getting data into opmanger from the switch. What is going wrong and what can I do about is. Thanx MM
Addding UPS connected to a server
I have searched for this in the, but I can't find the complete solution. I'm just trying to add the APC UPS to OpManager.
Devices not showing in Opmanager 7
I've been using OpManager 6 for a while now and just replaced it with OpManager 7. Because there aren�t many devices to monitor I manually added these devices back in. Although OpManager had informed me they had all been successfully added, I encountered problems with some of these when I tried to view them. 3 Cisco 7206 routers were picked up without a problem, whilst one Cisco 6513 switch showed up as a desktop and the other 6513 was missing completely. I updated the settings in OpManager for the
WMI monitors with OPManager 7
Hi, I am currently testing OPManager for feasibility usage in a LAN environment. In the previous OPManager 6, you can select WMI to use for the MSSQL monitor. However, in 7.0, there is no indication of WMI or SNMP used for the MSSQL monitor. The environment does not allow for usage of SNMP which is why this will be of concern to us. Also, are we still able to purchase licences for 6.0 rather than 7.0? Finally, can we purchase the MSSQL addon to the free version as we do not require the professional
OpManager AD add on
I want to get the Active Directory Monitor add on for my OpManager. I know it does an unlimited number of Active Directory servers, but how many domains? Thanks
forward SNMP trap
Hi, Is there a way which I can forward SNMP traps from my oPManager to my MoM?
Failover Monitoring
I'm thinking of running two intances of OpManager, one at my primary site and one at my failover site. My thinking is that if the primary site goes down, no alerts would get out, but if the failover site is monitoring as well, those alerts will be sent (and Visa vesa). Would this work?
OpManager 7 GA - MailServer Testing returns 501
Mail server settings testing button returns the following error. 501 Command "HELO" requires an argument Notifications are not working. Please help
OpManager 7 How delete Device Template?
Opmanager 7 Free Please help with next questions: How I can delete Device Template? How I can change Vendor Name for existed Device Template? Thanks
OpManager service won't start
The OpManager service won't start on our server. The service begins to start, but it just hangs at the following screen. Please advise. Thanks, Carolyn
Problems Right Off From The Start [Edit with More Info]
I installed OpManager 7 today on my test server that is running Server 2003 Standard Edition, SP 1. I logged on locally as the local machine admin that has FULL RIGHTS to the machine. I installed and everything seemed to install normally. Now, when I try to go in and execute the application, it won't start. Finally, I get the error: 'OpManager is already using the WebServer port XXXX' I read through and saw that I needed to go in and run the ChangeWebServerPort.bat. I did that, still got the same
MSP edition roadmap
I would like to learn what the MSP edition roadmap looks like? I am particuarly concerned that there is no out of the box monitoring for SQL 2005 in MSP edition. I also would like to see enhancement to the core product such as better device recognition, ability to assign "templates" with certain monitors to groups of devices, ability to create groups other then the default groups..If you can concentrate on that instead of getting new revenue generating addons that would be fantastic.
Dell Temperature Monitor
Is it possible to change the Dell temperature monitor so that it records the temperature in degrees (not tenths of degree). Also is it possible to put a label on each of the graphs (Ambient, CPU, Backplane) ? Is it a matter of editing a XML file somewhere? Thanks,
OpManager 7 MSP Beta testing
Is it possible for us to sign up as beta testers for OpManager 7 MSP? We currently use OpManager 6 MSP using 40 probes. Please let me know.
Install of opmanager
Hi I have installed opmanager, and try to start opmanager, but the message coming up: WebServer Port 1550 is occupied. Change the port by executing bin/ChangeWebServer script. I have do this many time, but the same happen. To info, I have also installed the EventLog from AdventNet. Regards ______________________________________ Geir Siqveland IT- dep. Pratt & Whitney Norway Engine Center AS POB 544 N-4055 Stavanger Airport Norway Mobile: +47 934 32 587 direct: +47 51 64 21 13 fax: +47 51 64 21 30
In OP6 there were Vendor Specific Monitors, in OP7 not
In Opmanager 6 there were Vendor Specific Monitors like Compaq Server Temp. In OP7 there is nothing. When i try to add a new monitor i need the right MIB file. What can i do to use the old option from 6 in 7. Thanks in advance Beheer_KA
OpManager 7 - BV images folder not updating
We have a plasma screen on which we display vital networking gear and servers in our NOC. We followed the guide for creating the HTML page as described by a tutorial on the AdventNet Site. What we have found is that the images used for this static HTML page are not updated automatically and the business views (BV) need to be clicked manually before they are updated. Basically this defeats the purpose of having our NOC display. Does anyone have a similiar situation and/or a solution. Below is a support
Graphs Not displayed
Hi, I had configured OpManager to show performance of my database server. I had configure it to show all the performance counters but it fails me to give performance readings(graphs) of CPU Utilization,Memory Utilization & Disk Utilization. I tried to troubleshoot but doesnot help. Pls. guide.
Discovery Issues
When Discovering devices in opmanager 7 the devices do not get placed in the proper networks. There is no way of moving the devices to the proper network or even creating a network unlike V6. I have many vlans some are 24 bit netmasks and some are 20 bit netmasks. The discovery process will create some networks that do not exists in my architecture. I did not have these issues in Version 6. Also why was the abilty to add, remove and rediscover networks removed? Bad decision if you ask me.
OpManager Premium or MSP
Hi All, I work for an IT services provide and we are currently looking to roll out a remote netmon solution and are looking at OpManager as a solution (we are also looking at MS System Center among others). But I have a few questions that I'm hoping you can answer for me. 1. I can find no real difference between the functionality or premium and MSP, is there a valid reason for choosing MSP or is it simply a licensing requirement? 2. I downloaded MSP and according to the blurb OM is supposed to support
Unable to get Event Alerts
Hi all, We are testing OpManager MSP Edition Bulid 6003. When i am trying to generate alarm for event rule, i am unable to do so even for a particulat user. WMI, RPC and SNMP are running and the administrator previllages have been given. Please help!!
Opsmanager working with a Sensatronic Enviroment Sensor
I have the mib for a sensatronic and can not get the snmp custom oid to work. It does not find it. I have attached the MIB. Any thoughts please?
Polling Period
Hi, I want to setup a monitor that polls every 5mins but between certain time periods i.e create a URL monitor which polls each 5mins from 9am - 4pm, Monday to Friday. Can App Mgr do this.?? Regards, Rick
Opmanager 7 GA - SMTP Test fails
When I try to configure SMTP settings and send a test to my own email account, I am getting the following error. It used to work with the 7 Beta. Error: 501 Command "HELO" requires an argument See from stderr.log below. Please help. Thanks 17:06:01:302 PM javax.mail.MessagingException: 501 Command "HELO" requires an argument 17:06:01:302 PM at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1020) 17:06:01:302 PM at com.sun.mail.smtp.SMTPTransport.helo(SMTPTransport.java:630) 17:06:01:303
customing monitor
Hi, i would like to personalize resource monitor and create new vendor section but in the file opmanager_graphinfo.xml when i put a vendor different from SNMP i get error message in opmanager "resource monitor section". Where must i add MycustomVendor for example to make the vendor section in the file opmanager_graphinfo.xml enabled in the "resource monitor section" ? Thanks for help and sorry for my poor english. Regards. Stan
OpManager MSP 6004 Released
Dear All, OpManager MSP 6004 is finally released after some last minute delay as usual ;) We gave importance to Remote Management. So we can say this as Remote Management edition. The newly added addon modules are, 1)Remote Control: Now you can remotely control the devices which are behind the firewall, inside the customer's LAN. No need to install any external plug ins. Everything is automated. 2)Instant SMS Tool kit: You can connect your GSM modem to the central server and forward notifications
Can not monitor SSHD
Hello We have several Linux Servers but any of its can not be monitored with Application Manager. The error is: Authentication failed. Kindly verify the username and password provided , but the user/pass is ok, so I can login via a ssh client. At Linux Pc, I get the following log: Jul 10 15:31:48 stest001lx sshd[29847]: Did not receive identification string from 10.x.x.x Thanks
Traffic analysis on HP ProCurve Secure Router 7102dl Router
Hi We have HP ProCurve Secure Router 7102dl in our office and WAN link is terminated on the Serial Interface. Can we analyze the traffic on the WAN Link through Netflow analyzer. Thanks Chiranjeevi
forward SNMP trap
Hi, I would like to forward OpManager traps to my external MoM. How can I do it?
Display server stats with php?
is there a way to display opmanager statistics on a seperate website? we want our users to be able to view the uptime percentages of servers on our intranet using php is there a way to access this information and display it in this way
Creating categories
Hi, is there any way to create new groups or subgroups for devices? i have a lot of routers. some I care about more than life itself. others can go down for a week and i don't care. how can i group these different kinds of devices so as to be able to assign different monitoring, altering and SLA profiles to each group of devices?
Monitoring oracle
Hi, I'm monitoring an oracle server with several databases. I want to monitor tablespace allocated, used, etc. for each database. The problem is that it seems to be monitoring all that but just from one database, the one that has the greatest index. Furthermore, when visualizing the data graphically, the titles of each tablespace graphic appear as the index of tablespace, not the its name. Any idea? Regards, Rodrigo.
Graphs Not displayed
Hi, I had configured OpManager to show performance of my database server. I had configure it to show all the performance counters but it fails me to give performance readings(graphs) of CPU Utilization,Memory Utilization & Disk Utilization. I tried to troubleshoot but doesnot help. Pls. guide.
Opmanager 7 GA questions&problems
Hi, we are using Opmanager 6, Netflow 5 and Service desk 6 in our organization, and apart for some small problems, we love them. I have installed version 7 on test server and i am having some problems with this version: - All my 2003 servers are recognized as NT, this does not happen with DC - There is no way that i can add Exchange monitoring on my mail servers, application tab is just not there. DCs are recognized automatically and applied without my intervention, but i am puzzled how to get exchange
Next Page