Availability Report - limited to business hours/days
Hi, We would like to create timebased availability reports for some servers like: - only during business hours from 7:00 till 18:00 - or only on week days - 24h 7/7 - 24h 5/7 In following topic" How to create a report limited to business hours only" from (08/05/2008) was mentioned that this would be available in he next hotfix. But we don't see an option in the current version of OPmanager (build 7102). Is there a way to create timebased reports (eg report of last monts between 7:00 and 18:00) ?
VM and OpManager
Hi All -- Will OpManager and Netflow Analyzer work if configured as VMs on an ESX server? Thanks.
OpManager restore DB
Hi all, I have some question about OpManager restore process. my OpManager version: 7020 Than I backed up the data from this OpManager (7020). I restored DB in other server. But It couldn't restore every server. When I entered the restored DB, there is appeared following error message: Status Message Unable to fetch Managed Object details for the object : x.x.x.x How to fix that ? Thank you.
monitoring success of Events??
Hi, my Sophos Antivirus performs an update every hour. If this update is successful, an event is generated. If the update is not successful, no event is generated. Is there a apossibilty to create a monitor in opmanager that gives me an alarm, when an event is missing for a specified period of time? Regards Juergen
Message body is short in WEB Alarms and Alarms Windows
Hi, i found one problem with a web alert. ... so I mean. I send a test snmp trap with any device to my OpManager 7102. OpManager forwarded it to my e-mail normaly : "Message: testEvent is received from 10.124.144.176 with the following related information : sysUpTime: 0 hours, 51 minutes, 50 seconds. , snmpTrapOID: .1.3.6.1.4.1.3955.1.3.70, testMesg: This a test of the alert subsystem. If you can see this message your alert subsystem is correctly configured. Device: 10.124.144.176 Category: Server
Edit Criteria for profile to occur between times
I wanted to Edit the Criteria for a profile assigned to a device and select the Apply this profile during the below mentioned time window option to specify that the notification should only occur during business hours Monday to Friday. When I do this the alert fail to be sent. I can get it to send if I specify 00:001 to 23:59 every day, but as soon as I try to make the time more specific or reduce the days, it fails to send an email alert. OpManager version 7102 currently in Evaluation on Windows
Unable to remove many monitors
We are evaluating OpManager for network device management. As an example of one of the issues we are experiencing with OpManager, we have a Cisco Catalyst 4506. I selected to Add Monitors for CRC Errors, Bits In and Bits Out. This created over 600 monitors on the device, 3 for each port. There appears to be no way to remove the bulk of these. If I go what appears as the easy route and select Add Monitor, and simpy UNcheck the monitors in question, they are not removed. If I go to the SnapShot page
Yet another feature request: Notifying groups by email/sms.
Hi all, Is it an idea to add the ability to notify groups of engineers by email or SMS? This should then be done by Notification profiles and it would be convenient if it would be possible to configure on device level too.. What I'm thinking of is creating a list of specific email and/or SMS receivers. While configuring the devices you can than specify either specific email or SMS receivers or a group of members with selected email/SMS receivers. Currently it looks as if you've to add email/SMS receivers
Allow multiple choices for additioanl fields
When adding customized additional fields, we can only choose one item from the pick list. However, we hope we can choose more than one items, e.g. impact on several departments.
request: custom link
Hi, You have recently included custom links to open an object with VNC or web. Is it possible to open object with Remote desktop as well? regards Bj�rn
Feature request for "Downtime Scheduler"
Hi! I've configured a "downtime scheduler" entry for restarting all servers each week. As expected I didn't receive any SMS for this time. But now, I activated sending traps on the servers. Traps are sent by SMS although the "downtime scheduler" is running. Is it possible to create a checkbox at the "downtime scheduler" configuration that traps shouldn't be sent, too?? That would be a nice feature. Regards, MokMok
Poll using TCP
Hi All, My problem is that two of my servers are not pingable. Therefore, I hace to use TCP polling. I configured TCP poll for port 22 and then 80. However, in both cases OpManager can see that the device is up, but for packet loss it shows N/A or 100%. As a result, it shows 100% unavailability on graphs and reports. Please help to correct availability monitoring using TCP polls. Thanks in advance! Bithajcs�r
Custom Monitor Graph description not making sense
Hi, i have created a custom monitor using a QoS mib from Cisco. The custom monitor work fine but when i go and look at the graph the display appears to be presenting index numbers of the map class, i can see no where where this can be changed. this is crucial to use rolling out the product to our clients. i have added an attachment showing what i am getting
Discovery of new services
Hi, I defined number of new services to be monitored. However, I can not make OpManager to find those services on my servers. The only way to assign services is to add them by hand. Is there any way to make OpManager to discover custom services? (They are marked for check during discovery process.) Bithajcsar
ESX Server VMware CPU Utilization is over 1000%
I have a VMware ESX server that is being monitored in Opmanager and I just added the monitors for CPU Utilization and it is showing that two of the machines are using over 1000%! One is listed as 3192% and the other is at 39246%. Is there something that I am doing incorrectly? Thanks, Joe
Monitoring Cisco ASA 5510
I added new device template to add my Cisco ASA5510 appliance, i am able to see all the interfaces, however, i am not able to monitor CPU, Memory, Active Session Count and Temperature of this device using SNMP credentials. Please help. Regards Samad
WMI for 2003 server
I wanting to add WMI monitors (Disk util, CPU util, etc) for a 2003 server, but only see options for SNMP or CLI. Is this possible? I'm on build 7101. Thanks chuck
Problem with Exchange Monitoring
Hi, I'm evaluating build 7101 of OpManager and on the whole it seems to work quite well. However, I'm having a problem getting the monitoring of our Exchange 2003 server to work correctly. Every time I try to test one of the Exchange monitors I always get a message back saying the monitor did not respond to the test request. I've tried the following to try and fix the problem: I've triple checked the logon credentials and they are correct I've checked the permissions for DCOM & WMI on the Exchange
Moving Database to different server
Hi Guys I am trying to move OpManager from one server to another both servers are windows 2000, but have different host names. The build version is 7020 When I copy the database from the original server to the new one I get the following error Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server I tried to run the RepairDB.bat myisamchk: warning: 1 clients is using or hasn't closed the table properly myisamchk: MyISAM file ..\mysql\data\OpManagerDB\operationstreetable.MYI
Notification after more than one check
Is there a way to delay the notification of a downed server until the second or third time it's reported down? We have a Windows service that is scheduled to stop and restart when it receives updates. We don't need to know that it went down for that, only if it goes down and stays down. -Thank you.
typo in device name has caused inaccessible device
Hi, I have put a typo in a device name. I clicked on its IP address after adding and by mistake put " - Device Name" I cannot reach this device by name, IP address, or by searching through device maps.... What to do?? Regards, BF
OpManager vs. AppManager??
How can I compare and contrast OpManager and AppManager?? Is there anything on the ManageEngine website that would help me do this?? They seem quite similar, and I get the impression that AppManager provides more detailed application monitoring per se. Thank you, Tom
Acknowledged Alarms & recent alarm log
Any chance that once an Alarm has been acknowledged that it is removed only from the recent alarm log? At present the only way to remove an alarm from here is to clear it however as an Operations team, we only want to know about recent un-acknowledged alarms, not acknowldged ones. The alarms tab would still show acknowldged and un-acknowldged alarms. Many thanks Brad
I found that failed disk and memory utilization. but cpu is
Helo to all, I�m having a problem on opmanager 7100, it is not collecting data for Memory and disk on all of my linux and windows servers. CPU works fine. For example on a windows server when testing memory it says that "The Monitor did not respond to the test request " Dear support-team. I found that failed disk and memory utilization. but cpu utilization is fine. Test environment : OS : Fedora core ver 6 net-snmp : 5.1.4.1 builder name : 7102 Monitor Name Win-MemoryUtilization Protocol SNMP OID
error device monitoring using snmp at the Solaris 8.
Hi. I want to monitoring using snmp. I use default snmp deamon at the solaris. I confirmed that system name, desc, oid etc. but i not confirmed that cpu utilization, memory, disk utilization etc. Does must HOST-RESOURCE-MIB load? How to uploading Host-resource-mib at the solaris? I want to intall net-snmp at the solaris. How to? thanks in advance for help. ko young suk.. Telemant Corp.
How to use delta for continuos counter OID for Net Util.
Hello List: I have searched through forum but cannot deduce clearly how to setup hence this post. I am trying to setup graph for Netapp Filer's Network Utilization. I have already loaded latest OID through MIBBrowser and see related OIDs which I can probably use (both Low and High) IfInOctets IfOutOctets I am looking at following formula , found in on of the thread in snmp forum: ==================================== For half-duplex media (delta!ifInOctects + delta!ifOutOctets) x 8 x 100 ----------------------------------------------------
Cannot edit business view anymore
Well, I cannot edit my business views anymore, it just says loading. Restarting opmanager or the server did not help... Any ideas? Regards Bj�rn
Notification Profiles (Message Variables)
I am looking for a way to include a number of $variables in my messages, which I would expect to be available by default (from .1.3.6.1.2.1.1). $sysDescr $sysObjectID $sysUpTime $sysContact $sysName $sysLocation $sysServices Currently, OpManager doesn't seem to provide this information in the form of available variables. As I understand it, you have to create a new field in "Device Notes", and populate the field manually. Additionally, I would like a variable that provides me the ip address of a
How to display windows service status
I'd like to be able to display the status of Windows Services (Like DHCP) on the Serves infrastructure page like you can with normal Service monitors (like FTP). How can this be achieved. Cheers Dan
OPManager not monitoring CPU and Memory
Don't know if I am missing something here but, I've setup OpManager with Read/write on SNMP and I just cannot get it to monitor the CPU and processor. Everything else is working. I've tried this on the MYSQL database and now running it on MSSQL 2000. Please could you help tell me what is wrong as we need reports and have paid for this software.
Cisco Aironet 1100 Access Point
I am having trouble finding the MIB or OID to discover basic host stats from my 1100 access points such as CPU usage and Memory Usage. I am running build 7024, but there is no device template for the 1100. Can you point me in the right direction to build these monitors?
Trying to migrate the MTSQL DB to MSSQL.
Hi Been running OpManager on MYSQL but wishing to migrate it over to MSSQL. The issue I have is that the DatabaseMigrator.bat is not working and if I do switch over to MSSQL There is not data and trying to import devices, it says the delvice is already added. Can you assist with somesort of tool to move this database over to MSSQL.
I error that CPU Utilization monitoring only.
Dear OpManager-Support team. I error that CPU Utilization monitor only. I attached doc.file and support file. Thanks in advance for help. Ko Young Suk Telemant Corp.
Custom monitors, Device Templates and Community sharing
Hi, Does anyone know the OIDs for monitoring CPU, Memory and Backplane Utilization on a 3Com switch? Also please use this post to specify custom OIDs for monitors that you know and the corresponding Device types. Will be helpful for other OpManager users. Also do try out the new Device Templates feature in Opm 7 which allows you to create templates for monitoring devices and share with the OpManager community. Regards Girish
Password Reset
I need to reset the admin password for the OpManager Web Client. Is this possible?
how to bluk remove monitors
Hi, Anyone know how to remove all monitors from a list of servers? I need to clear all resource monitors from all my Windows 2003 servers, and then re-apply a new template... Regards, BF
High CPU
Hi, I have made some searches on this but not found anything relating to my problem. I have very high cpu utilisation. First of all, I have several "cscript" running in task manager that are consuming a lot of cpu(are these connected to opmanager?). The machine is running in i virtual ESX environment and has 2,4 G CPU, 3 gig RAM and fast disk-access to SAN. The CPU is running at 100% more or less all the time you work with the interface. Further more i have about 40 routers with 3-4 interfaces monitored,
Unable to Add any New Devices
Hi, I have a call logged with you via the Support portal, but there has been very little response and the site is soo soo slow. I cannot add any new devices to OPmanager, weather PC, Server,Router or switch. when i add the device it reports that it has been added Successfully, yet when i then search ....it say not added. I have done RemoveDB but this has not fixed it , i have also done a delete from deletedinterfaces, in the SQL database. The Repair DB does not seem to work either. These are not
Problem generating scheduled report
Hello guys, Our company is using OpManager Build 7023 and I'm trying to create report schedule. We have cisco routers and switches and i can have any report for switches but can't have report for routers. I suspect the problem might be because of firewall we are using. So on firewall in my policy what should i add? I mean is there some port number or anything to let the report pass through the firewall? BTW the firewall is fortinet. Thanks a lot. Delgee
Device Multi-select
We need the ability to select all (or selectively) the devices on a map at the same time. E.g., we want to update each device with notification profiles, and would like to do this without having to go to each device individually. There are other configurations changes that would benefit from a multi-select option: - Dependency - Monitoring - Vendor - Category - Type - Passwords
Next Page