How Can i View the Network Topology of my Entire Network being monitored by OPManager
How Can i View the Network Topology of my Entire Network being monitored by OPManager?
AIX Monitoring using CLI
Hi, Would like to refer a problem encountered in OpManager in monitoring AIX servers. OpManager cannot monitor the CPU, Memory and Disk utilization. I have already raised this issue but the problem keeps on occurring. We have different versions of AIX: 5.1, 5.3, 6.1 Your immediate response would be greatly appreciated. Thanks.
Customization/Localization
Hi OpManager Team, is it possible to change/customize the translation of the menu anywhere? The attached files show the parts, where I want to change the translation of "dashboard". Technically it might be right translated with "Armaturenpult" but practically it's not used in the content of network management at all. The second question about customization is related to the third screenshots attached. Is it possible to deactivate the whole "link status" diagram, which is new in business view? Best
Is there a way to monitor Opmanager in LAN?
HI I am currently testing Opmanager 8 and I have two server that I want to monitor. Is it possible to monitor using Opmanager with LAN setting or does it have to setup a third computer to use as Opmanager to pull monitor data off the two server.
Wrong alarm
Hi all im using OpManager build (8812) I have configured my opmanager to monitor three services on server and its shows " service down " while the services are up , i cleared however after 10 to 15 min its shows up again and so on.. please help Thanks
Unable to fetch Managed Object details for the object
Hi everyone, We are receiving the above message when trying to click on an object in opmanager. The object shows up as "Unknown" with it's name as USCHHV03. I've seen this in other threads and it looks like the issue may need to be resolved via a call. I've attached an op manager support file as well. Thank you for your time.
NOC view with ACL type read only access for auto sign-in when using a Web browser.
Create for the Admin a NOC Manager link similar to the User Manager link under tools, where an Admin can define NOC PCs (static IPs) that could display a webpage without having to sign in. The Admin could define what the NOC PC would have access to, but with read only access.
OpManager WMI monitors graphical display issue
Dear Team, My OpManager server is recently having some problem displaying the graphics of monitors for WMI monitors (like radial display for CPU, memory and disk). It only shows the default gray color (no data to display) . When I try to test the monitor (Edit> Test Monitor) i get a positive response with WMI. I try to restart the ManageEngine service but in less than 24 hours the same problem would appear. This has happened the 4th time since its first occurence last 3 days ago. I'm not sure what
Error when adding a Monitor
Hi, First, I would like to tank your help. When I try to add a new monitor for some devices, the OpManager returns me an error. I didn't find nothing in the LOGs. I tried to remove and add the device and the error persist. Thanks for help.
Problem with OpManager: Unable to fetch Managed Object details for the object
Hi, We have OpManager version 8722 with operating system Windows Server 2003 and BD MSSQL 2005. OpManager reset the service and the wrapper log does not make any mistake, but entering the application we have the following problems: 1. When I select any device, the program show me the next message: Unable to fetch Managed Object details for the object 2. In the Dashboar tab show me the errors: Error occurred while generating widget. I send you the snapshot the
Error when adding performance monitor
Hi, I've error when adding performance monitors. Once I clicked on the Add Monitor on the lower right, a new webpage with error is shown. Performance Monitors Monitors Period (mins) Threshold Edit Input Voltage 60 Not Enabled Number of Fragments 15 Not Enabled Outgoing Packet Error(s) 15 Not Enabled Oversize Packets 15 Not Enabled Undersize Packets 15 Not Enabled Add Monitor Remove Error! Please help. Regards, colin
Enterprise Edition question
Hi guys, I am setting up a new enterprise edition environment with 2 probes and a central server, I need to get all the data from my existing essential edition into this new environment and have it available from the central server. any ideas would be helpful. Thanks, Stephen
WMI with OpManager for Linux
Pardon my ignorance :), but can OpManager 6 for Linux also perform WMI monitoring? I do not see WMI monitors in the available list.
Expand Port Display Name Field
When configuring the ports on a Cisco switch the default display name is the full name of the port plus the description entered in the CLI. Could the size of that field be expanded in the configure ports screen? The text runs off the side of the text box and so you cannot see the full name of the port without scrolling in each field. It makes editing multiple ports difficult. Either just double the size or make it a user-configurable amount of space. Thanks
Category Creation
Is is possible to create a new category. I have environmental monitoring equipment that I can keep track of using SNMP, but it doesn't really belong in any of the existing categories. Anthony
set two threshold on single performance monitor
Create a new type of performance monitor in which,user can set two threshold on single performance monitor
POE port power load monitoring on Cisco 3750X
Hello, Has anyone been able to monitor PoE port power loads on Cisco 3750X switches with OpMan built-in SNMP? Thanks, S.B.
OpManager Build 8812 Released
Dear Users, Build 8812 is released and it can be downloaded from this link. Instructions are also in the same page. http://www.manageengine.com/network-monitoring/service-packs.html Here is the list of enhancements. The Alarm reports page now has option to filter alarms based on its properties; This report can be exported to .pdf, excel formats and can be emailed. Option to escalate alarms via SMS in addition to email, is included. Option to configure URLs in Alarm Escalation is also added. You can
Problem to add new Esxi server
Dear Support, I have some problem to add new esxi to OPManager : Before, when I added a esx server, I received a form with "host name", userID and Password to establish the connection. Now, I receive the same form as the form in the admin panel and the esx server is not added correctly to OPManager. I think that problem occurred since I had updated to 8812. Please feel free to contact me if you need additional information. Nice regards, PYM
CLI API not closing sessions correctly
Hi, I have discovered an issue with the CLI API and am wondering is there a fix/workaround for it? The issue is the close() method in the CLISession class sends a FIN,ACK message to the devices. This is supposed to be just a FIN message if it were to adhere correctly to the standards. Most devices however ignore the incorrect flags and exit the session. However some devices are stricter and do not close the session. These are Cisco devices and the result is that the line stays up on the device and
MS SQL 2008 R2 on windows 2008 r2
Is this supported like a backend for opmanager, ncm plug-in and nfa plug-in
How can I map by zip code
We have over 350 sites nationwide and we would like to have a US map on the OpManager dashboard that would have each site in it's correct location with a dot that would change with status - red yellow or green dots. We have zip code data for each site and would like to place them on the map by zip code instead of having to manually place each site. Can anyone help me with a method to do this?
Device image
Hello, I'm new in APManager and even after upload an image to the correct directory ("\ManageEngine\OpManager\webclient\common\images\DeviceImage") the Business View doesn't show the image I have just uploaded. When I use a standard image the BV shows the image normally. It should be something easy to fix, but after change the image properties some times, I give up.
Install OP+NFA plug-in+NCM plug-in
Hello I want to install this set in one VM ( win2008 ) with a MS SQL backend on another. I found on the site that NFA plug-in uses the same SQL instance ( that of OPManager ) but nothing about which instance is used by NCM plug-in. Please provide this information. Thank you very much
Create Device Templates based on non OID data
Currently a device template can only be created by using an SNMP OID. While that makes sense and makes scanning more intelligent it does limit the usefulness of the Quick Configuration Wizard. Example: I have 20 servers in my PeopleSoft App Server pool. I need to monitor the integration broker message queue on these boxes and only alert the PSFT team if they are too large. The OID of these systems is going to be of a normal windows server so I couldn't just apply it to my peoplesoft servers,
AIX interface not show
I have 3 AIX server that I monitored using OPManager. I have successfully add the server in to OPManager but in the interfaces section the interface not show, when I try to rediscover it says that unable to rediscover. The credential tes was passed for both SNMP and CLI. What can I do to showing the interfaces ?
Response time
Hi all, After 3 months of testing... i'm sooooo fed up Here is my configuration : Virtual Machine running windows 2008 R2, 8 vCPU, 16 Go of RAM. with MySQL db installed locally on a second HDD When i would like to display the virtual device in infrastructure snapshot (and actually all other snapshots...): here is the response time i got : it is IMPOSSIBLE to work like that,.... every click on a link take a LOOOOOOT of time. After many search, nobody is able to help. I tried a repairdb,... nothing
Add traps from multiple MIBS
When adding traps from imported MIBS you can only see a small number per screen and they have to be each processed manually. Could this list be expanded to show more MIBs in a single screen and have check boxes added to search more than one MIB? If you have a large number of MIB's this can take a long time. Another thought would be to also add the option to search and import traps simultaneously when the MIB is being uploaded.
Notification on alert acknowledgement
WE would like to have the ability for an email or other action to be triggered when a technician acknowledges an alert. This would inform my staff that someone else is addressing the issue and they do not need to get involved.
New Infrastrucutre View + Device Template
I am trying to add a new Category, and then create a device template to be applied to that category. I can get this far, but I don't see the ability to add Windows Service monitors inside the template. Am I missing something? Thanks Shaun
Configuring Failover for OPmanager version 8
After successful installation of Primary/Standalone and the secondary Server, The 'startMysql.bat' in the 'bin' folder shows CHANGE MASTER command prompt.
How to minotor status of the OPManager Server itself.
Over the weekend i just notice there were power failure happen few times because of building maintenance. So my boss need to know the status/info of the OPMAnager itself, like at what time the server down, or healthiness of the OPManager Server. I suppose it should have by default or i just cant find it. Please advice. Bravo OPManager,my boss start to pay attention about this products. TQVMuch
Issue with OpManager Syslog server
Hello, I'm currently evaluating OpManager to determine if it is the right product for our company. I have added devices for monitoring, however I discovered there is an issue with the syslog server. It reads as follows in the OpManager console : "SyslogServer Failed to start due to Address already in use: bind for the port 514. Click here to change the port." Any help would be much appreciated.
Device not reachable V8
After installing V8, I get the message that the Device is not reachable. I had no problems like this in V7. I have ran discover and it does not find my router. I can see the MIBs for the host from V8. I thought it might have been a machine problem, so I reformatted my server and we still have this issue.
How to add column about disk partiation usage?
I want to check server 's cpu/mem/disk everyday. how can i list them in a window thks I am using opmage8 trial version.
Integration con UTMs Checkpoint and Firewall Checkpoint.
I have problems to visualize components to UTM EDGE VPN version X, N, S. I cannot recieve information about snmp protocol from these devices. You can help me to obtein the best configuration to work with these devices. And another problems is I cannot work with Firewall Checkpoint RS 1070 Appliance. You can help to monitoring, memory, processors, interfaces and another components. Thank You Pablo Reyes
Custom MIBs to Monitor Performance of Nortel & Techroute devices.
If any one of you have identified the MIBs & specific OIDs to monitor the below device models (or a subset of this list) and imported into OpManager for monitoring, please share it with us. Nortel 8610 Switch Nortel 4550T Switch Nortel 4250 Switch Techroute SR 1001 Router Techroute 2633 Thanks in advance. - Umanand. ManageEngine IT360 Team.
Health check report
Dear sir, Pls help me out, How to we get Health check report all (CPU Utilization, Memory Utilization, Disk Utilization and event log on single report. Thanks
Specific field in opmanager report
Hello, Is there a way to build a report based on Availibility and Response / Devices Availibility with additional colums (not only Device name, total down time, availibility percentage). I would like to add device Notes \ comments, floor or other fields associated to the device, in a report. These fields are available when configuring alerting and I would like to use them also in reporting Is it possible ? Thanks sebastien
OpMgr 8811 move issue
Hello, I'm trying to move Opmanger 8811 from a 32 bit Win 2003 server to 64 bit 2008R2 server SQL database. We're also moving the database from SQL 2000 to 2008. I've copied over the Opmgr directory from the 2003 server to the 2008 server. When I change the name of the 2008 Opmanager directory and replace it with the 2003 and try to connect to the SQL 2008 db I get the error No Driver Jar is found. I am able to connect to the SQL 2008 db using the Opmanger folder originally installed on the
Next Page