Line plot problem on custom graphs
Hi, Just want to confirm with people a possible bug aka feature we don't want. When looking at the graphs for a monitor we can enter in a range of custom dates and it will display a area filled graph for that range. Then if you click on 'line graph' button it reverts to the original last 24 hour graph. This is a shame as the line graph option prints much better than the are filled graph.
annoying startup issue
for 2 weeks, i was trying to install opmanager v5.6 successfully but howcome i couldnt get manage to install it or i have to say to start it. -Tried in 2 Windows 2003 Standart Server machines (fully patched and registered), 2 Windows XP machines (these are IBM laptops,fully patched and registered) -The installation phase go smoothly i choose the pro edition 30day trial version... -After the installation finished the op manager wanted to start up the service-i click ok -it succesfully open the iexplorer
Monitor total up/down bandwidth
What would be the best solution to accomplish this. We have a DS3 and if we go over our limit of 20MB then we are billed extra by our ISP. My boss wants to be able to monitor this. Does this software provide this capability and if so, how can I set this up.
OpManager will not start
Running OpManager on my Windows XP laptop. It has been running in conjunction with SD+ now for a couple of months. However a couple of days ago OpManager refused to start. It has been that way since. I have tried starting it from the CLI as well. This is all I get: C:\Program Files\AdventNet\ME\OpManager\bin>startopmanagerserver Windows XP This OpManager has been licensed to Evaluation User. Starting AdventNet ManageEngine Server Modules, please wait Process : DBServer [ FAILED ] Process : OpManagerStatusProcess
Disk Utilization Graph no show
Hi, I have a problem with graphs, just the one that correspond to Disk Utilization is not showing and for moments the Memory Utilizacion Graph dissapears, I don't know why, I wonder if the reason is that my device have 3 hard disks??, and if it is so, why the other graph appears and dissapears once in a while? Thank's
Exchange Monitor
I just upgraded to OpManager 6.0 and for the life of me I can not seem to be able to figure out how to use the Exchange Monitor. I had it in the 5.6 version but when I go to monitor applications all I have is for 5.5 and in my about it says not registered.
Hard drive Compatibility
How to enable S.M.A.R.T hard drive.
Event ID's not coming through into Op Manager.
I am having an issue with Op Manager not getting Event ID's from all of my devices that are in Op Manager. I made sure that WMI service is started and working on all of the servers including my Op Manager server. Thanks.
LinuxMonitor working, but OpManager doesn't think so!
Hi! I've just installed the LinuxMonitor SNMP agent on a Linux box next to my desk. It's on the same subnet as the machine running OpManager and has no firewall. I can browse to the LinuxMonitor web interface on port 8040 and all looks fine, however when I try to test an SNMP monitor from OpManager, say Disk Utilization, OpManager claims "The Monitor did not respond to the test request". OpManager confirms that the machine I'm trying to monitor is SNMP enabled as it has a little blue star next to
Problems with MSSQL stats
Hello All, I have been trying to get the MSSQL stats working in OpManager, but I haven't been able to get any of them to work. I have SNMP and the SQL Server Agent running as the instructions tell me to do, but I can't get any statistics back, With the exception of Cache Hit Ratio (which has recorded nothing but 0). I went to the MIB Browser, but I get an error everytime that I try to load it. When I drill down into the tree at the left, there are red circle/slashes through all of the options. Any
Check box on logon page
How do I remove the check box on the login page for OpManager. I do not want the passwords cached?
My server crash
Hello, I have a problem that I don't understand. Sometime my server crashes and I must restart/start OpManager service. It seems me the problem is caused by the utlization of the java client. For example, when I use the Java client and I forget to exit it after I have used it, the client loses the connection with the server, then a popup message alerts me that I must restart the server (the server has crashed just before). Anybody could help me to solve that? Thanks Regards.
Problem with service monitor
I have a W2003 server monitored with opmanager and everything goes fine except the service monitoring. Every time I try to add a monitor I obtain the following error: "Error # User credentials cannot be used for local connections". Userid and password are okay so I tried to check the request to the server and I saw that there is not any request when I try to add the monitor, so the problem seems related directly with opmanager. Any suggestion? Ricky
PSeries AIX server MIBS not graphing at all
Has anyone successfully setup a PSeries running AIX to graph memory, CPU & Disk space? I have setup SNMP & connect to the box and interrogate but I get no infoOpmanager connects & says that the server is a RISC 6000 & the OID is correct. The authentication is correct & I get the OS version correctly but that is about all I get.
Why it shows the IP instead the name?
On the Reports-- Devices availabilty Some of them shows the Displayname, while some shows the IP.. How to set it such that it shows the Display name instead the IPs
Any way to export the device availabilty page to HDD or..
send to an email like the notification in weekly basis???
Linux installation, $DISPLAY and Vmware
Hello! I've problem installing OpManager in a guestVM (running SUSE Enterprise Server). When i try to install OpManager I get "The installer was unable to run in graphical mode. Try running the installer with the -console or -silent flag." I've exported DISPLAY=localhost:0.0 If I install in text mode and try to run ./StartOpManagerServer.sh i get this error message: se-sgq-mgm01:/opt/AdventNet/ME/OpManager/bin # ./StartOpManagerServer.sh Exception in thread "main" java.lang.InternalError: Can't connect
Integration from Nagios to ServiceDesk Plus
Hi y'all, Our support department has decided to use ServiceDesk Plus for handling support related problems. In Operations, we'd like to have our Nagios setup automagically post a problem to the ServiceDisk, so they (and eventually we) know that ie. Tux1 is not answering our pings. First of all, is this possible at all? Second, if this is possible, what format should I use for my notification mail from Nagios? I've been looking around for this, but has been unable to find any documentation on the
Disk space of Exchange stores is N/A, also no data listed
1.) I have attached a screenshot of my Exchange dashboard. I see alot of "green" zeros but no data there. When I click on them and select the 7 day or 30 day view I have no data collected. The monitors all seem to test ok. 2.) I am also wondering why I cannot see the disk space of the email and public stores. Shouldn't I see numbers in place of all the green zeros??
conf files for SNMP management agent for a Sun Fire V240
Hello everybody, I am trying since few good long days to set up the SNMP agent configuration in order to have system information about disks, memory, CPU using an SNMP (SEA) trap receiver. Can somebody send me a working configuration (the files set-up) of Sun SNMP management agent for a Sun Fire V240 machine? I installed the bundle �SUNWmasf.<ver>.tar.Z�, I followed the doc �Sun SNMP Management Agent 817-2559-13� but there is no result for the moment. Thanks anyone who can bring me some light. aurekius
Regarding OIDs
Hi all, i am new to this SNMP field I went through it and I am need of OIDs for x86 Family 15 Model 2 Stepping 9 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free),for windows machinw can any one please send me the available OIDs to get memory,CPU,Disk Utilization. Thanks Nagaraju M B
snmp agent
Hi, I already configure the snmp service in W2003 and I configured the snmp agent too, but my device don't show the blue star at right top, like other devices that have the agent running, Could you help me giving me the steps to make the agent run? Thank's
CPU Utilization Monitor.
It would be nice if there was a way to make alerts not be recorded unless CPU usage stays pinned at the threshold for a certain period of time, say 5 mins. Otherwise you constantly receive alerts every time the CPU usage spikes even for a minute. David.
Cannot connect to server after initial installation
Hello! We've just downloaded and instaleld OpManager under RedHat Fedora Core 4. So far so good, the install appeared to go fine. However upon running the StartOpManagerClient.sh we can't connect to the server (running on the same machine) and are asked by the client app. to "Check whether the server is running". Working our way through the instructions we attempted to start the server using StartOpManagerServer.sh. Should that scipt exit at all? Currently it keeps hold of a terminal session and
OpManager is unable to contact the SMTP server
When I try to send a message test to the SMTP server it shows a message "unable to contact the mail server. Verify if the configured port is working on the server". I�ve this server configured for mail also for a Citrix application and it is working fine. I�ve tried with 2 smtp servers without success. May be there is something wrong on my configuration or a system requirement missed. Your help will be appreciatted. Regards. Dario.
Cisco Aeronet 1200 not being recognized
I've added all 3 of our cisco aeronets. When i added them they were put as server and as unknown devices. I moved them into wireless and added them as device Cisco C1200 Aeronet. The only thing I'm getting from them is uptime, I'm guessing this isn't normal?
URL Monitor Ignore Threshold
I was wondering if there was a way to set the URL monitor to only report if the URL fails twice or more? I have a number of URL's that I monitor and I often get a failure from one device or potentially lots of devices at one poll and then it's fine again straight away. I am thinking this is a connectivity issue at our end rather than the URL not being available. With that in mind it would be great if there was a way to ignore certain types of failure unless their is more than one alarm for the URL.
OpManager server fails to start
Hi, I'm evaluating OpManager, and it's working fine on our LAN, but when I tried to install it on another box (2003 server) in another LAN we have the server fails to start. It seems like it has problems with Tomcat. I'm running it on port 50080 and we do have another Tomcat process on this box on 80 and 443, but I doubt this is an interfering factor. 50080 is responding with an "Internal Server Error". I have attached the log files from OpManager's internal Apache web server and Tomcat server. A
OpManager DNS resolution
When discovering devices, many appear only with the IP address and not the name? Can you please explain how OpManager resolves the name, for example, using DNS reverse lookup (IP) or WINS (NetBIOS)? I see from a forum post on Firewall Analyser (http://forums.manageengine.com/forumHome.do?forumGroupId=49000000002007&forumTopicId=49000002677505) that there can be timeout issues. Could this happen with OpManager. Thanks, Mark
OpManager Version 6.0
Hi, I was when the new version of OpManager 6.0 will be released? Will it be released this year in December or will it be in January? Also, what new features (both major and minor) can we expect? Thanks.....great product!
No Percentage on Disks....
It would be nice if you could set disks to percentage rates for full rather than for specific GB or MB ratings. It would also be nice if one could set general categories, e.g., "OS Drive", "File Server Drive", etc. and give different values for these types of drives, then rather than assigning "90%" to each OS drive individually you could just set that drive to "OS Drive". David.
SNMP Trap Processors don't work
Hi there I am trying to setup some trap processors for a Fortinet FGT-60 device. I am seeing the following in my unsolicited traps view. No Trap Parser defined for received trap: TrapOid : .1.3.6.1.4.1.12356.0.301 Variable Bindings: sysUpTime: 1 day, 22 hours, 56 minutes, 47 seconds. , .1.3.6.1.6.3.1.1.4.1.0: .1.3.6.1.4.1.12356.0.301, When I click the Create Trap Processor button and add that to be marked as cleared the traps keep appearing in Uncolicted Traps. I have tried to disable and enable
Windows Server 2003 MIBs don't work
Hi folks, We're currently evaluating OpManager for our organization. There are several custom SNMP monitors I want to setup utilizing dhcp.mib, ftp.mib, http.mob, and inetsrv.mib, which are all found under c:\windows\system32 on a Windows Server 2003 install. I copy these MIB files to the $OPMANAGER\mibs\ directory. When I attempt to "Load MIB" within OpManager's MIB browser, it fails trying to load any of these MIB files with the error: "Error parsing MIB: foo.mib". What's the deal? How do I load
Monitoring Cisco 2600
Hi, I have a Cisco 2651 which I was successfully monitoring with Opmanager. Out of a sudden opmanager stopped reading statistical information from the Router interfaces. I have deleted the device and re added it. OpManager detects the router correctly and list all the interfaces but can not get any information other than the IOS version it is running. Other routers on the same OpManager are working fine. Thanks Ramzi
Deleted Netowrks Stay
I'll delete a network from the discovered networks, the page refreshes, they're gone, close browser, reopen still gone, BUT they will reappear upon system restart/restart of the OpManager Server. Any ideas of the cause? Notes: I'm not using the default 'admin' account-but I am using an account with all the admin privlidges. Any idea why the database doesn't 'keep' my networks list? If I add a network it will stay just fine-it's removing them that I'm having issues.
Avaya S8700 MIB
I am receiving and Error parsing MIB when I attempt to load g3mib20_ASN1.txt. Has anyone tried to use this MIB ? Thanks
snmp on 3com superstack
I am trying to add snmp based traffic monitoring to a 3Com supersatck 4900 switch. when adding traffic monitors -> Interface RxTraffic, interface Tx Traffic etc and run test monitor, I get an error message saying no response from device and with possible resons: Snmp not enabled etc. When I go to the mib browser and use RFC 1213, go to ifInOctets etc and do a get, I get a response with the counts for the traffic. (so I suppose it is not a problem with the passwords and community strings?) The swich
Monitor Temperature
Hi, I wanna know if OpManager can monitor the temperature of a device. Thank's
E2002: Specified OID is not implemented.
hello, i have installed a trail version of ManageEngine OpUtils 3 on PC and start snmp service on other PC run windows 2000 pro sp4 , i want to monitor the cpu usage of that node , but when i enter the ip address and press "show" , an error : E2002: Specified OID is not implemented. how can i make it ??? thanks!
Cannot add new windows service monitor
It says: Error # Access is denied Help would be appreciated
Next Page