OPManager Monitor OID Calculations
Hi, I want to create a SNMP monitor based on different OID values, ex: ((.1.3.6.1.4.1.2021.4.11+.1.3.6.1.4.1.2021.4.14+.1.3.6.1.4.1.2021.4.15)/.1.3.6.1.4.1.2021.4.5)*100 When I "query device" it shows the result of calculation, but then, when I click
SNMP issue for adding Raritan console Box
Hi Team, I have tried to add the console box server in our opmanager, for getting an error below. Can you please connect via remote session and resolve the below snmp issue.
Unable to monitor VPN at Fortigate VM64
Dear all, I am currently working on integrating FortiGate VM64 monitoring within OpManager Plus. I have successfully added the FortiGate device and applied the default device template that I found within OpManager site(https://www.manageengine.com/network-monitoring/device-discovery/fortinet-fgtvm64-performance-monitoring.html).
Can't update device category
Hello. We can't change device category, it's still present as unknown. Device is assigned to template, where category is choosen. How we can quickly change device categories? It's problematic to click it one-by-one for 140 devices
Windows Server 2025 device template
Is there an OpManager device template available for Windows Server 2025 ? If not, when will it be available ?
Need template to monitor Dell EMC Switch
Dear all, I need to monitor Dell EMC S5224F-ON. Is any template available? Best regards,
How to update new device templates after AMS expires
Hello， After monitoring my newly purchased H3C switch, I found that the template cannot be updated. The device model is S5000-16X-EI, S5008PV5-EI-HPWR， How can I update the template? My AMS has expired.
Custom SNMP Monitor of ipNetToMediaPhysAddress
Hello, we are trying to monitor a router's ipNetToMediaPhysAddress, what we are trying to achieve is to be able to monitor all the IP addresses assigned by the router, we have done the following: create a custom SNMP on the OID .1.3.6.1.2.1.4.22.1.2 to
Monitoring Uplink/Downlink Ubiquiti
Hello, We are trying to monitor through SNMP the Uplink and Downlink capacity of a Ubiquiti device but when we test the OID to add it it gives us the following error: "No reponse from the device. Check if the device is avaliable or not." The device is
Cisco ISR 1100 SDWAN SNMP template usage problem
I'm trying to associate our SNMP v3 credentials that we used without problems, to new devices and new device models. Cisco 1120 ISR with SDWAN is in question, properly configured with SNMP v3 credentials, we see traffic from opmanager to end devices,
Monitor VPN Tunnels on cisco router
Hi, I am using cisco ASR 1K for my S2S connection and I would like to monitor the status of my tunnels. Most of the performance monitors i am looking are not included in the ASR templates. Like VPN tunnels status, uptime, Rx and TX bytes. How can i include
Printer Status
Hi ALL I have test instance with 12.7.257 and it has some info - d0 a0 d0 b5 d0 b6 d0 b8 d0 bc 20 d0 be d0 b6 d0 b8 d0 b4 d0 b0 d0 bd d0 b8 d1 8f 2e 2e 2e 2e 20 20 What is it?
Cisco switch C1000-8P-2G-L Template
Hi ALL! I have Cisco switch C1000-8P-2G-L. Switch and i need to monitoring it... Who can share Device Template for this device ?? Thanks
Templates with thresholds set
I've begrudgingly had to move from Zabbix to OPManager, I'm surprised a paid product requires so much manual configuration vs a free product that's basically ready to go once installed. The templates in OPManager seem to be mostly unfinished, some have
CPU Usage for all divices
Main dashboar has an CPU usage widget but i can only see Cisco devices and i wold like to see all switch brands in one widget, is that possible?
Sync Device Templates
Hi ALL I try sync Device Template from ME side and have issue: Authorization failure. Please contact our support team at support@opmanager.com for further assistance.
Template for Windows Server 2022
I have the latest version of Opmanager that came out Dec 24. I still can't see any devicetemplate for Windows server 2022. When will it be available?
Build No 128168
Build No 128168 - February 27, 2024 OpManager: Around 20 device templates with basic monitors have been newly added for a wider support of device models during device discovery. where i can find list of this templates ?
One server template - many group of monitors
Hi ALL We have 300+ servers based by WinServer 2019/2022 Each of them is member of some group. Each group has "personal" set of monitors/thresholds/notification's. How i can mapped same "personal" set to many servers based on WinServer 2019 and 2022
Templates of Kyocera devices
Hi Team. Could you create and share templates for next Kyocera devices: 1) Kyocera ECOSYS M5526cdw (Color device ) 2) Kyocera ECOSYS M2540dn (BW device) 3) Kyocera ECOSYS P2235dn Each of them have same OID responses: sysDescr.0:-->KYOCERA Document Solutions
OpManager doesn't show the CPU, Memory, Backplane utilization
Hi, We use HP, 3Com, H3C switches HP10508 & H3C7503 in our network. Opmanager doesn't show the CPU, Memory, Backplane utilization of those devices. And those devices are not classified at the discovering process as switches and go to unknown category. I have to import from unknown category to switch or router category. is there any problem with mibs? THX Kit2000
Monitoring a Radio System SIAE / ELTEK / ICT / Orolia
We received OP Manager from Tait, a radio communications provider. I am trying to monitor many devices from different manufactures at different radio sites, they all support SNMP. OP Manager does not have the templates for the below devices: Vendor:
Unable to import device template
I have a PureStorage device template that I need to import. I got the template from the manageengine website. I get so far as to browse for the file, it opens and there it get stuck, it doesn't want to save, it just stays on that screen, I left it for
Build No 125638 - June 21, 2022
Hi ALL! OpManager: Around 165 new device templates have now been added for proper classification of devices during Network Discovery. OpManager: Around 271 new SNMP performance monitors are now added. OpManager: A few default performance monitors are
Cisco C921 4P device template
Dear all can you provide us the cisco C921 4P router device template? Opmanager is wrongly discovering the named device and categorising it as a wireless controler, I've searched your template library but didn't find anything, not even anything for C900
IPMI monitoring for Lenovo and Cisco servers
i would like to be able to monitor IPMI for Lenovo and Cisco servers. could this functionality be added.
File Replication Services for Server 2012r2 false alarms
I am having issues trying to locate a way to override the two below mentioned alarms. Basically these are services that i do not need to watch for this particular server build out and would like to just remove the monitoring of the services. I
Inventory report on Cisco stack switches
Hy, i have plenty switches 3750(stack of 3-4) and 2960 standalone switches(OID .1.3.6.1.4.1.9.1.1208). Is there a way i can get for all those chasises to apear in my inventory report? Now i just get blanks, an this is not something i wanna show to my
Switch interface is down (false alarm)
Hello, As there is only 4-5 year old topics about this, and with no answer to the question, I have to open a new one. I've got switches on the network. Some ports are ofcourse not used. Even if the port was never used (before and after OP Manager installation) OP Manager still alerts me that the interface is down. I know I can choose to not alarm me on these ports. But as I have 100~ switches im not amused to go through every singel switch to remove the option to not alert on the specific port.
monitoring desktop temperature
HI All, I am newborn to using opmanager and appreciate your answers. It is possible to monitor cpu's temperature of desktops devices which are in the network generally? i wanted to add a monitor my desktop device, so I select the vendor as MICROSOFT but
Microsoft RDS-Farm & OpManager
Hi ALL Anybody have successful story about monitoring RDS-Farms (RDS Broker + RDS Session Hosts) via OpManager ?? What parameters are monitoring ? maybe anybody can share own templates/custom monitors?
Catalyst 9500 48Y-4C template
Hi. I wonder if you know if the template of a Cisco 9500 48Y-4C is available in Opmanager? We were not able to find it. Regards
IPSLA Flows
Hi. We have a customer that has Opmanger with a build 12.5.315 and includes 90 NFA interfaces. They want to configure Cisco IP SLA features and they are handling around 10,000 flows per secon incoming to Netflow module (IPSLA Flows). I wonder if there
I can not upload a FORTINET-FORTIGATE-MIB.mib at MIB Browser on opmanger
I have fortigate 1000d firewalls and I want to moritor CPU and Memory. then I downloaded a Mib file on my firewall box and I got FORTINET-FORTIGATE-MIB file. It has size 235KB. then I used the opmanager browser to upload and I have got some error "MIB
snmp oid returns a valid value inside Mib browser, but timeout when adding the same snmp oid as monitor
Hi, When I test snmp oids on a device (which has correct snmp credetntials), I get correct response which indicates the connection works seamlessly: (credential are masked) But when trying the same snmp OId as a new monitor for the device (or device template),
Getting server current time in OpManager and its API
Hi, I need to get servers' current time in OpManager and access it via API. Apparently, the current time of servers isn't available in OpManager by default. If it's the case, How could I add it and also access that from OpManager's REST API? Would it be through adding a custom SNMP oid to a device profile? Thanks
Self Monitoring in OpManager
For more videos related to OpManager: https://www.youtube.com/playlist?list=PL0FkrkKW27nNxQjwszmwVnnmRDK77Meq7
Custom Performance Monitor - How to define NumericToString type?
I'm trying to create a custom monitor where the function expression is set to NumericToString, are there any guides on how this needs to be setup? The OID returns a value between one and 7 and I want to assign text strings to be displayed. Does this type actually do what I need? or does it simply convert the numeric 5 to a string "5"?
DELL SCv2020 template or SNMP monitors
Hi, has anyone created a template for Dell compellent SCv2020? Or created SNMP monitors for this storage? I can't figure out how to monitor it since there is no template available in OpManager. Thanks. Matias
Cisco Catalyst 9200L 48-port PoE Switch - template
Hi ALL! I have Cisco Catalyst 9200L 48-port PoE Switch and i need monitoring it ) Who can share Device Template for this device ?? Thanks
Next Page