Disabling the useless add-ons
How do I remove the "Group Chat" / "Users" icons in OpsManager? Is it possible to add custom links in there? Is there a way to completely disable NCM/IPAM options in the program?
MIB Browser
How to use the MIB Browser with SNMP V3? Even adding the credentials correctly is not working.
Unknown Devices
In Op-manager after discovering my network i found most of the devices are listed in unknown category how i can fixed them
Email alert Issue
Hi, I am trying to set up an alert and for some reason the message body contains the following: 1ë,j ¿ÿùž²Æ {ðÞ¾' ÿÿÝŠÊek#Z™ïÂj× ¢¼¿ÿ÷ µè(¯/Ä®º+ü*'v+b¢ ÿþËkŠx,z÷«ŠÜ¿ éÞ«^wöÿÿ춳(u8¦{ÿÞ½éíO*^ I then checked other ones that I set up previously and they are all the same. I recently upgraded to the latest patch using this link: https://uploads.zohocorp.com/Internal_Useruploads/dnd/OpManager/o_1c01gdufuam92vmcoe1b0p1jmu1/AdventNet_ManageEngine_OpManager_12_0_SP-3_0_3_0.ppm Can you advise what the issue
Device not monitored
Hi, I recently set up a number of monitors for wireless access points so that we would know if they were up or down. One of them is currently down and I knew this when setting up the alerts but wanted to test how it alerted. Whereas the others are saying 'clear', the one circled in the attachment says 'device not monitored' when you click into it yet on the map it is green as if it is up and pinging. How do I amend this to show that the device is actually down?
Can't monitor Memory Utilization with [CLI] in Centos 7
I'm use Opmanager (Build Number : 12300) and try to monitor Memory Utilization with Protocol CLI on Centos 7 but always show value = 0 Device Detail as below Type = Linux Encoding = ISO-8859-1 Vendor = net-snmp How to configure to monitor Memory Utilization with [CLI] in Centos 7?
Powershell Script & workflow problems. HELP Please!
How do you execute a powershell script on remote host in Opman 12 in workflows.. In 11 I did this and it worked."cmd /c powershell.exe -ExecutionPolicy RemoteSigned .\${FileName}.ps1 ${DeviceName} ${UserName} ${Password} svchost.exe" trying to run a script now fails. with : " Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: " This same action on OPMan
Service Down but Url is work
i have Opmanager 10 for Monitoring. in some URLs i have this alarm: "Service may not be running. Enable the Service again to view the graph." but all URLs works correctly. please help me.
HTTP URL Monitoring
I've found several other discussions concerning URL Monitoring of https sites with TLS 1.1 or TLS 1.2. We are running the current build 12.3 and need to know the current status of this issue because it's appears to be unresolved. I attempted to setup two monitors this morning for a site using TLS 1..2 and neither monitor worked.
Change of time window in reports
Good afternoon, Pleasure to greet you. In version 12.3.004 the possibility of creating reports is limited to 2 options: "24 hours" or "8:00 AM to 8:00 PM". I need help to be able to change that time window to my work schedules: 06:00 AM to 06:00 PM, please. Attachment screen (Spanish version of the application) Thank you. Regards, Victor.
FTP Port 20
I've been informed by my security team that they have detected traffic from our OpManager server to all of the clients on Port 20, the originating port on the OpManager server was 44858. Why is OpManager querying or attempting to connect to our Windows and Linux clients, and all of our switches, firewalls, etc on port 20. I don't have anything configured that I'm aware of in OpManager to do this type of check. The Windows service monitor for FTP was deleted and so was an application monitor that
Public Page?
Does opman have the ability to have a public facing page that we can share within our org to show if anything is down?
_Total in MSSQL metrics
I have several DBs. Most of these are having Log Files Used Percentage lower than 50. One of these has about 98. And I have _Total as 97. I wonder how the _Total counted and if there's an option to monitor without this confusing element. Edit: After shrinking the log of one of the DBs from 98 to 75% the _Total changed to 11.
Monitoring via ICMP
In OpManager, Can anyone tell me that If the device is monitored by ICMP not by WMI and SNMP, Can I still receive the email or sms alert if the device is down ? Thanks
https://www.manageengine.com/network-monitoring/maps/ returns white page
https://www.manageengine.com/network-monitoring/maps/ returns white page at the moment.
Process monitor
I notice one of the the OpManager process monitor value is not pooling the same value as at the system that i monitored . The value in the Linux systems using top command is different from the OpManager process monitor value.
About byte and bit on Netflow Analyzer
Dear Netflow team, I watch on Netflow Analyzer with information below: - On the "Edit interface detail" tab, the "Bandwidth Capacity IN/OUR (bytes)" line ~> i understand there are byte parameter (Byte/second), not bit - On the "Traffic" tab, the "Utilization is calculated with Link Speed of xxx.0 Mbps. xxx.0 Mbps" line ~> i understand there are bit parameter (Megabit/second), not byte. So, i don't know how to understand it right.
Please help about ifindex issue
Dear Netflow Analyzer, I'm using Netflow analyzer application for reporting IN and OUT traffic. So, i can't understand what related to between Interface name (ifindex) on Netflow Analyzer and Fortigate 200B (OS 5.2.x) is. For ex: Based on pictures under attach files, you could show me that with an ifindex15 on Netflow analyzer, so what is interface (name or index) on Fortigate? Please find the attach file for detail and tell me some good information. Thank you.
Event log
I have created a new event log alert. But when I go to the server Event logs is not on the list to be monitored. All that is theres is Performance Monitors, WMI Monitor, Exchange Monitor and MSSQL monitor. How to I add event log to the list.
12.2 OpManager VCenter sessions
We have over 900 Active sessions to our VCenter server that are coming from one of our OpManager probes. The service account that we have assigned to monitor VCenter from the probe has over 900 Active sessions and is causing issues for other users. Is this normal behavior?
Virtualization Dashboard population
Hi Can anyone suggest a fix to get the virtualization dashboard to populate? all the other dashboards work fine but this one is showing no data on all the graphs This is in build 12300 thanks
Monitor HP Proliant Hardware (Disk, Temperature, PSU, etc)..
I need a solution to monitor my HP Proliant hardware.. Demoing OpManager because on the product page it states the following: Hardware Health Monitoring Monitor the hardware health of key device parameters such as temperate, voltage, power, fan speed, status of processors, disk arrays, etc. of VMware, HP, Dell and Cisco systems and get alerted if they violate pre-defined thresholds. I installed OpManager and discovered on of my HP Proliant Servers.. I added both the iLO IP address and the ESXi IP
IP SLA
Hello, to everyone friends, i am trying to get my statistics of IP SLA on opmanger, i had done first simulation on GNS3 can anyone help me that how can i get me results of Simulated IP SLA on opmanager
Problem with network monitor
I install ManageEngine OpUtils 8 on Windows 8.1. Sometime I must restart PC to ManageEngine send alert email of Network monitor tools.
OPManager stops polling snmp for few devices - What do I have to check ?
For few devices, (not linked) OPManager stops polling while we have no alert ! (we discover the fact by any chance) For the majority of the other devices monitored, the snmp polling goes on. For devices no more polled anymore, credentials are right and test passed. OPManager Build Number 11600 / Windows 2008R2 / MSSQL 2008 How can I detect in the OPManager DataBase when it stops polling a device while we have no alert ? (SNMP test passed // which table has to be verified ? what query may I do ? How
OpManager 12 and Office365 mail error
I'm trying to configure email settings from OpManager 12 to Exchange Online, but when sent test message, receive: "Mail server authentication failed for smtp.office365.com. Please check the user name and password." Server Name: smtp.office365.com Port: 587 Timeout: 20Sec Login / Password - valid, I can login thru OWA TLS - Enabled Maybe, you can help me with this?
individual device network traffic statistics
we would like to purchase your product before that we have doubt that by using this product is it possible to take the statistics of individual computer network traffic which are connected in same LAN.
V12300 Dashboards
Since the upgrade to v12300 our dash boards are not displaying correctly on our wall board. As such some of the boards are displaying on two pages which is no good to us as we need them on one page. I think the reason maybe because the real time graphs are now displaying some stats below the graph? is there a way to switch this off? Also our business view is going onto two pages for some reason that we cant work out. We have also got the same issue of the CCTV views resetting themselves that we experienced
Bar Chart Text
Hi all, Is there a way in Opmanager 12200 to edit the way the Top N least available displays the text? I would like to set the my device names so they show up vertically as at the moment we cant see what half the devices actually are. Thanks, Graham
Reclassify Alert
Hello, I feel like I'm missing something very basic here. How do you reclassify alerts? I'm trying to make it so that a device that misses 3 polls is marked as Critical rather than Trouble. I haven't found how to do it anywhere in the interface. I'm aware of how to modify thresholds on the device profiles to classify alerts generated through those, but not for 'Device Down' scenarios. Thanks (also, as a note, it looks like the 'Add New Topic' form is broken. When typing a title the suggestion list
How to upgrade Manage Engine OpUtils Build# 80014 to 12200 ?
Follow Steps to upgrade Version 8 build 80014 to Version 12 build 12300 on https://www.manageengine.com/products/oputils/service-packs.html. I don't understand step: Contact support and get the new license by sending old license
Firewall analyzer
Hello, Im using opmanager 12.3 and can not find a way to add a device to firewall analyzer nor I cannot find any up to date documents of opmanagers firewall analyzer.
OpManager App won't work in iOS11
There was talk of a new app, when is this going to be released?
OpManager Monitoring and Alerts Timer / Delay
Hi Guys, So i was setting up OpManager and i created a configuration to monitor 4 servers, The Alarms and Notifications coming from the servers should not be triggered Real time, The CPU as an example can spike up and down frequently so to avoid in a way the spam i would like the CPU alarm to be delayed or perhaps be checked a few times more before it sends me an email. so i have these two screenshots and what is the combination of these that would allow me this. Thanks
Which net speed the client is using
Hi guys, We installed the OpManager for a client and everything is fine but he has a question on which i couldn't really find an answer online or i missed it. Even though we can see the network traffic and everything he wants to know is it possible to create an alert in OpManager for client PCs that gets triggered depending on which network the client is using as they have 100mbit and 1gbit speed enabled All Desktops should be using the 1gbit but sometimes they switch to 100 can OpManager do if so
Opmanager Performance monitors
Hi I currently have an issue with Opmanager (Build 12300) where as the performance monitors are not triggering, so even though (for example) a disk has reached its threshold, the monitor stays as normal and doesn't change to Violated, this then meaning no email is sent. When I run the test monitor it connects and pulls back the violated percentage, but it doesn't switch the threshold from Normal to Violated. Any suggestion would be really appreciated. I have deleted a server and re added it all back
Upgraded from 11.6 to 12.2, custom hostname for Opmanager not working
I've just upgraded from 11.6 to 12.2 (Essentials) . I can log into the server using the actual hostname of the server. But can no longer connect using the custom host name. The SSL Cert (which matches the custom hostname) is still working, as can see it load with the local (incorrect) hostname. Even when connecting to the custom hostname, the cert loads and reports valid, but nothing else loads- no login screen. It seems like a host header entry is missing somewhere perhaps?
Impossibile to delete custom "Performance Monitor"
Hello everybody, I'm trying to migrate OpManager Build 11000 to the version Build 12300 into a new machine. Into the new version I'm trying to add some "Performance Monitors" and for some reason my new monitors don’t work. So, I want to delete my “Performance Monitors” that I’ve created but there is no way. How I can delete it? Another important point is that: if I try to edit my first monitor that I created (name is “DATAPROBE IN01”), in the edit box there is no data, no SNMP OID, etc… Any idea?
Reports
Has anyone tried doing reports using the SQL DB? The build in reports are not very useful nor very nice to look at. So I was wondering if anyone have tried pulling data from the DB to excel in order to get a better view of the data
Not collecting
OpManager seems to be working (page is up, db is on, services are running) but we can't see any movements on the console. Please advise if you have had a similar issue
Next Page