OpManager7.0 : Alarm Messages
Which feature that I must remove, if I don't want this kind of alarms : Traffic Utilization for Interface ** to NODE ** is 100%, threshold value for this monitor is 65% Errors rate for Interface ** to NODE ** is 1.106%, threshold value for this monitor is 1% Errors rate for Interface ** NODE ** is 1.106%, threshold value for this monitor is 1% I unchecked all "Interface Templates". By the way... How to remove ALL thresholds (Error and Discard) for all interfaces in one operation from "Admin/Interface
No RX and TX data in two interfaces
Hello, I use OpManager7 and I am getting no RX and TX data in two interfaces however I did get it with OpManager6. Is there anything I can do? Regards, Manuel
Even more trouble ;)
Hello The last week and this week i tried to send a support ticket to you but somehow it didn't work. I tried to attach the Support Information File but after the upload it always displayed "No files uploaded". So i'll post my problems here and attache the Support Information File. 1. Interfaces cant be added to a device The interfaces are discovered when i click on "Rediscovery" but if i want to add them OpManager sais "Interfaces added succesfully" but i dont see the new interfaces in the device.
Alacatel Switches --> Mibs?
Hello i tried to get these two mibs (Attachment) working because i think OpManager doesnt know how to handle my switches. But after i've uploaded them over the mib browser i get the following errors: Error parsing MIB:ADN-ENV-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-ENV-MIB.mib Couldn't resolve these MibNodes : { adnEnvHss } and the second one: Error parsing MIB:ADN-MIB.mib Exception while loading MIB:Could not parse the file D:/OPMANA~2.0/OPMANA~1/./mibs/ADN-MIB.mib
Network view incomplete
Using 7021. My network view for a subnet does not show all devices on that subnet. Any way to fix this?
Event Log Rules Not generating alarm notifications.
Hello, I ticked to be alerted some event log rules and also created a few, such as Event ID 9539 for an Exchange Store dismounting. I left all the other optional fields empty. I triggered this event by taking a store offline. Event though I have the check boxes selected in my notification settings, I'm not getting alerted. I can see the events in the application log. Am I missing something? Other alerts such as thresholds are working. Thanks,
to fetch Managed Object
Upgraded to 7021. All was working. Added some new servers. Continued to get reports and alarms. Went to look at a server to deal with an alarm, and got 'Unable to fetch Managed Object details for the object '. I now get this message for all servers I try to look at. Is this a 7021 bug? A database corruption? Something else? How can I fix this?
WAN Monitors - IPSLA - Working?
Hi, Has anyone been able to get this feature working correctly ? I have gone through the guide, but sill no joy. Anyone else have problems and get them sorted? :cry:
Number of users accessing
hi, i wanted to know is it possible to keep account of users accessing our application throught opmanger. and one more thing can we keep a track of the data base ... is it increasing and how much. thanks anish
Problems Right Off From The Start
I installed OpManager 7 today on my test server that is running Server 2003 Standard Edition, SP 1. I logged on locally as the local machine admin that has FULL RIGHTS to the machine. I installed and everything seemed to install normally. Now, when I try to go in and execute the application, it won't start. Finally, I get the error: 'OpManager is already using the WebServer port XXXX' I read through and saw that I needed to go in and run the ChangeWebServerPort.bat. I did that, still got the same
Memory Utilization Report Shows Negative Values
I have setup the daily report Memory Utilization to be emailed to me and on only two of the servers it shows negative values - (picture attached) If I test the monitor it works fine. Any ideas what's causing this?
Migrate current OpManager Installation to new hardware
I am wanting to migrate my existing installation to a new server and maintain my existing database. I am using the built in MySQL database on my current installation and want to continue to use it on the new installation. Is it possible to install on the new hardware and move my existing data to the new server and not have to re-register? If this is possible, how can I do that?
Device Availability Wrong
I have two devices that are reporting 0% availability although they ping from OpManager 7 and are collecting disk, cpu and memory stats ok. Just the availability is zero. It looks normal otherwise. Has anyone else seen this? thanks, Lerwick
Interface Not showing in Device Dashboard
Please see screen shots in the attached document. The interfaces appear in various screens but NOT in the device dashboard. This only happens for a few devices but we need it fixed. mark
Custom octets ?
Hi I'm a newbie about opmanager. I want to monitor a custom field like Interface octets. this field is defined by counter32 type and the value is increasing continuously. I defined a new monitor using expression. .1.3.6.1.4.1.2021.255.1.3/$DELTA_TIME but its result only represent (CURRENT_VALUE / $DELTA_TIME). How can I get delta about OID values?
URL Monitors don't show up
The Url monitors don't show up under the URL view. It says "No URL Monitors found in the database". However when I go to Admin and Url Monitors they are there and we continue to get emails when it hits its threshold. How can I get the Url monitors to show up in the infrastructure view?
Change device from domain contoller to server category
Hi, My v6 license does not include AD monitoring. My AD servers are discovered as domain controllers. I am not able to change the category of the domain controller to server. When I select any of the domain controller, there will be a status message showing 'Active Directory Monitoring Add On Feature is not licensed'. This has prevented me from monitoring all servers detected as domain controller. In v6, I will be able to view the device property page and change the category to server so that I configure
Managing client sites with Opmanager
I'm new to Opmanager. The company I'm working for is looking for software that can monitor the client sites they are working for. Is it possible to install Opmanager at our office and discover the client networks. I can discover the client routers but need to be able to get behind the routers to discover the devices on the client's (private) network. If this is possible where do I find instructions on how to implement? Thanks Paul
Adding monitors
Hi all, I'm trying to add some monitors to the OpManager 7, and not finding the right way doing it. The case is that I want to monitor MySQL cluster which runs on Linux Server, so I though to create a new Template "MySQL Cluster" which has the Linux System OID + my custom monitors. this could not be achieved as the OpManager reject the System OID since it's already associated to Linux. So please help me simply to add more monitors to any server NOT through the template since it will then add my custom
Issue with scheduled report
Hi, I'm trying to use in the scheduled report the publication through an URL. I set in my web site an area to receive reports but when I try to put the url and click on next button I got a message asking me for an valid email adress. Maybe I'm wrong how to configure the url in OPManager (OPManager 7 build 7021), so can you tell me what exactly is the syntax I need to put in the field. What are other requirements to publish these reports in separate web site. Thanks for your answer Regards Philippe
Monitoring Overheads
I was just wondering what is the overheads of using opManager to monitor switches and servers? Someone told me that to monitor the amount of traffic over a port on a switch it almost doubles the amount of traffic required. is that true? or does it just get a reading of the amount of traffic that is crossing the port at that time? Also what strain would be placed on the systems if i was to increase the monitoring from 15 minutes to say 5, would this give me a more accurate reading of the amount of
Event notifications
Propective new user: My company is planning on acquiring OpManager software. I have a question concerning event notifitications Are Event notifications in OPManager only done via email? Can notifications be sent via pager, blackberry, etc? Ron Pennell
Domain Controller has status of crical but no alarms.
I have a dc that has a status of critical but no alarms. How do I clear this?
Importing devices into OpManager
Hi there, Does anyone know of a way to import devices and their details into opmanager without having to do a discovery or manual adding? It would be nice to be able to import from csv or something so that devices can be automatically categorised and configured without having to do lots of post configuration once devices are discovered or added. Any ideas? Is there one particular SQL table that can be modified or are there several joins that need to be populated? Cheers! Ben
Problems adding devices/Devices partially added or removed
Hi there, Im having issues with devices that are partially added or removed and I cant seem to fix the issue. I have run the sql queries to remove any old entries but it still doesnt work. I've also tried running the delete wizard but the device is not found. Any ideas? Have there been any updates to the delete scripts lately that i am missing? Thanks heaps, Ben
Business View placeholder icons
Allow unmonitored icons to be linked in business view, Ex.: An unmonitored hub have a link wich I want to see, but i cant add the hub in Opmanager (not manageable)
Webserver port 80 is occupied
what do i do when the ops manager console wont come up when i get the error Webserver port 80 is occupied change the port by executing bin/change Webserver script
Can't delete part of the infrastructure snaphots
After the upgrade from 6 to 7 it's not possible to delete the options Routers Servers Switches Desktops When i install OP7 as a new installation, i can do it. Please advice
install on Debian Etch
so, followed the install steps - same as guide here: www.debianadmin.com/monitoring-serversnetwork-devices-with-opmanager.html to install on Debian Etch. Install went off fine, but running StartOpmanagerServer .sh I got an issue with setEnv .sh not being found. I changed the path in StartOpmanagerServer .sh to point to setEnv .sh directly, and now the server start ... sort of. It takes about 15 minutes of just sitting there to kick off MySQL, then "inside addon check" appears, then nothing..... any
Monitoring NIC Teams?
What I am trying to do is monitor the NICs within an NIC team on an HP server. Pretty much all I want in to be notified if one of the NICs fails or loses connection. Ufortunately I see now way that this can be done, or am I just blind? Thanks
CheckPoint Firewall - No Data Available in Snapshot
I installed OpManager v7 and monitor Nokia CheckPoint Firewall, but Snapshot Graphs show "No Data Available" in CPU utilization, memory and connection. What's the problem and how to fix it
Linux Load and CPU useage
I am evaluating V7 of opmanager I have two main issues. 1-I am trying to setup load average monitoring for a linux server, it is not present the OID is .1.3.6.1.4.1.2021.10.1.3.1 i have browsed in your OID browser for 15 minutes and can not find it and i Can not enter the string directly ( which would be great) 2-I would like to change the defauld CPU utilisation to 100- .1.3.6.1.4.1.2021.11.11.0 since this would give a better view of total CPU used since your default shows only user space CPU used.
Custom Graphs problem
Hi there, I am trying to modify the default graphs for the various device types, particularly UPS'es. We use Powerware and Vectek UPS and i have tried adding the required fields as per the howto's in the forums (modifying the opmanager_snapshot_dial.xml and ups_monitors.xml files) but nothing seems to change. I even tried adding my own "test" graph symbol with dummy values but even that wouldnt change the appearance of the device snapshot pages. Am i doing something wrong? I am running the latest
DNS NAMES
Hello, I am new to OPsCenter, and am at a client site setting it up, I have done a discovery, my machine is on the domain with administrator access, fyi its a 2003 env. anyway how do i get it to resolve the host name of the ip's it discovers? help chris
Hotfix Released- Build 7021
Dear Users, We have released a HotFix over OpManager 7 with some issues fixed. This can be applied on OpManager with Build 7010 or higher. We request all users to upgrade to 7 and then apply the HotFix. Here is a list of issues fixed in this patch: 1. Issue of Database connectivity loss when running with MSSQL as backend, is fixed. 2. Resource Monitors Dials showed NA despite data getting collected for some devices. This is fixed. 3. Landing in a blank screen sometimes after logging-into the webclient,
Issue with Quick Configuration Wizard and DCs
Hi, I'm working with OPManager 7 build 7021. When I'm using Quick Configuration wizard to associate a profile notification including DCs. All servers got the notification profile except DCs. Other thing is when you associate a notification profile, you can not set AD monitor and SQL Monitor in the notification profile. Thanks for your answer Regards Philippe
Scheduled Reports PDF Filename
We have an issue with the Scheduled Device Ability Report. The file name the report uses is the ip address of the device. We need this report file name to be the name of the device so that the customer can understand which device it is for... How do I fix this? Thanks!
upgrade 7021 took away admin tab
I no longer have access to the admin tab after the upgrade. I only have one user and that is admin. I am logged in as admin
problem with the "add device" function
Hi, I have a problem with the "add device" function : opm display this message : "Entries for the device are either partially added or removed.Click [here...] to remove and readd the device" when I try to add a printer. Click on the "[here]" don't correct the problem. Could you help me? Best regards, PYM
How to read error rate alarms?
Whenever an alarm for this type of error is generated the error message is sent: Errors rate for Interface t1 0/1: DS1 Driver (Falc56) is 100%, threshold value for this monitor is 2% I have attached a snapshot of the graph also. The question is, whenever I log into the device the error rate is very small as shown below: Line Status: -- No Alarms -- 5 minute input rate 111480 bits/sec, 32 packets/sec 5 minute output rate 25360 bits/sec, 31 packets/sec Current Performance Statistics: 0 Errored Seconds,
Next Page