SNMP monitor: sum of some entries of a table
Hi, I would like to create a monitor on a device which do the mean of SNR values. For these, I have a table (OID: .1.3.6.1.4.1.13732.1.4.4) : remoteucpTable remoteucpEntry ucpnmdid upsnr poweradjustment symboloffset frequencyoffset ucpstatstime upsnr.5026313:10.09 upsnr.5038053:9.55 upsnr.5038276:9.36 upsnr.5296264:9.87 upsnr.5296278:9.95 upsnr.5296300:10.61 upsnr.5296333:9.51 upsnr.5296393:9.87 upsnr.5296496:9.59 upsnr.5296516:10.00 upsnr.5296537:9.53 upsnr.5296553:9.56 upsnr.5296586:9.82 First,
Not working e-mail sending about interface problem
If I selected not all interface (etc. 1 from 5) then not working a e-mail sending about interface problem. If I selected all interface then a e-mail sending work correct. What is a problem ?
Monitor Device by DNS name or by IP - Opmanager 7027
I have an issue whereby some devices seem to be monitored by DNS name and some by IP address. For some devices I can add a device by discovering it with an IP but not by DNS. Also - if I do a PING request - some show they are being pinged by IP and some by DNS. Can you please advise how this works.
MSP Opmanager 7 - Update on the planned live?
Hello, in a previous post you spoke about Q2. In one of the latest post you spoke about a few weeks. Could you give us an idea of the official live for this product? We are waiting for that to avoid spending time to redeploy two times the same things. Let us know. Regards, Giuseppe
Cant see new performance monitor
Cant see new performance monitor. I built a new performance monitor to watch the load of a system. I can see the monitor, and add it to Linux systems, but I can not see it when I try to add it to Solaris systems, why?
Cany see device: Unable to fetch Managed Object details for
Cant see this devices details after successful add device Get: Status message: Unable to fetch Managed Object details for the object: device name - have tried removedbentries and dbrepair to no avail - can delete and add device - device is a 2003 AD server - so this device has been added and removed a few times and in the interim has also changed its dns name; which I thought may be related help? thanks in advance
Settings Suggestions
Does anyone know of a good place to get a White Paper or something that would have a set of suggestions for what would be a good starting point for setting up Polling Intervals, Thresholds etc.... for all the options in Opmanager that you can set.
Problems with the Database SQL 2005
Hi, I am using OpManager 7027, I migrated OpManager 6.0 with DataBase SQL�s 2000 at OpManager 7.0. I�m used SQL 2000, but now I need to use Database SQL 2005. OpManager 7.0 is utilizing compatibility with SQL 2000, when I removed the compatibility and I used the motor the Database SQL 2005, the devices of the maps disappear. Annex the images of the problem. Any sugestions that resolved the problems? Thanks & Regards I. Delgado Especialista del producto
Where is my latest topic??
How is it possible that my last topic "Monitoring 'Free Disk Space' on ESX Server" isn't listed here any longer?? Did anyone delete it?? What's wrong here?? :evil:
Anti-virus considerations
Do any exclusions need to be configured in an anti-virus scanner when installing it on the serverOpManager runs on (assuming an MSSQL back-end on another server)?
Cannot Add Performance Monitor
OpManager 7 (build 7024) free edition. I cannot add performance monitors to my Netware server objects. I am trying to add the free space in GB and MB performance monitors using the add monitor button. I select the monitors that I want, click on add, the screen goes back to the snapshot page and the new monitors do not show. No errors.
Getting negative CPU Utilization
How come my CPU Util is now giving negative utilization? Date Time CPUUSAGE Percentage Apr-14-08 14:59 -6.0 Apr-14-08 14:59 -6.0 Apr-14-08 14:59 -6.0 Apr-14-08 14:57 -6.0 Apr-14-08 14:42 -6.0 Apr-14-08 14:27 -6.0 Apr-14-08 14:12 -6.0 Apr-14-08 13:57 -6.0 Apr-14-08 13:42 5.0 I'm using the snmp monitor for CPU using advent's linux agent. I had all positive numbers till this weekend.
OPManager Refuses to Start
I am posting this in the hopes there will be a quick fix that someone knows of, I have also logged a call in the support area. I am running OPManager 7 (7025), Windows 2003 (all patches installed), with MSSQL backend. I had a report from OPManager when I went to add a new switch. I got an error message indicating that 'some record of that switch already existed, click to remove'. I did that multiple times with no luck. At that point I shut down OPManager and cycled the server. Since then OPManager
Config File Manager
Hello, When I use the Config File Manager Tool, It works on a router that I have, but it does not work on my switches. 3750 and 3560's in particular. It says "Config file retrieved successfully" but when I click on the S, R or compare, it comes up blank. I am running build 4413. Can you help? Thanks
OP Manager Help!
I am having trouble starting the OP Manager server. Here is a copy of my log file. administrator@BCPSMON01:/opt/AdventNet/ME/OpManager/bin$ sudo bash StartOpManagerServer.sh [sudo] password for administrator: Java Home /opt/AdventNet/ME/OpManager/jre This evaluation copy is valid for 28 days inside addon check Starting AdventNet ManageEngine Server Modules, please wait Process : StartTelnetClient [ Started ] Process : OpManagerStatusProcess [ Started ] Process : AuthMgr [ Started ] Process : DataMgmtRPI
Problems with information SLA
Hi, In the manual cites the following " You can add shortcut icons to business views that helps you to drill-down the network. This helps you to easily navigate to a view from another view when objects are grouped based on their geographical location" In OpManager 7.0 You added dashboards to the maps and views of business for see the availability of the views. I would like to understand, Whether a view of business show information in the Dashboards with devices, Why not show information with view
Business Views with shortcuts to other views show critical
Hi All -- We have a problem with Business views we've created that contain shortcuts to other business views and the shortcuts to those views show as device critical when no devices associated to that view show critical. More specifically: -We have a campus view showing multiple buildings and each building we have equipment in has a shortcut (with icon). Click on the shortcut icon you get a floorplan business view with the polled equipment shown where it is located and a shortcut back to the campus
Can't discover Interface
Hi All, I am evaluating OP 7, i tried add my DSLAM D-Link DAS-3248, i set community read only in the DSLAM and add traphost and snmp host to OP 7. I can add the DSLAM but i can't discover the interface, when i tried to rediscover, there is an error. How can i discover the interface? Query Result : RFC1213-MIB : IfTable Query OID : .1.3.6.1.2.1.2.2 ifDescr.1:eth-0 ifDescr.2:eth-1 ifDescr.3:eth-2 ifDescr.6:dsl-0 ifDescr.7:dsl-1 ifDescr.8:dsl-2 ifDescr.9:dsl-3 ifDescr.10:dsl-4 ifDescr.11:dsl-5 ifDescr.12:dsl-6
concerns on upgrading to 7 from 6
My company is currently running OPmanager6. Before we upgrade to 7, we are looking at the layout of 7. OPmanager7 gives us less views to our business view. We have over 40+ that we need to see at the same time. Is there no way to customize the view on the overview page?
Monitoring equipment
Hello, DOes anyone have experience with monitoring Polycom devices from within OpManager? Any information would be great. THanks, CHris S.
OPmanager crashed and need to recover FAST
Hello Everyone, Opmanager server was not showing certain features (like server disksapce monitor, which was previously visible). So we restarted the opmanager server and now all the Maps, Nodes, almost everything is gone and it looks like a fresh installaion. Not even a single business view, infrastructure is visible in the dash board. we had like 20 different views and none of them could be found. Previously (before this incident) when we try to run "RepairDB.bat" it said two of the users are still
Problems in RestoreDB.data
Hi, I'm trying to make a RestoreDB.bat in a clean instalation of OpManager 7.0. The log says the following: java.io.IOException: Stream closed at java.io.BufferedInputStream.getInIfOpen(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at java.io.FilterInputStream.read(Unknown Source) at jdbc.RestoreBackup.readZipAndUnzip(RestoreBackup.java:1136) at jdbc.RestoreBackup.unZip(RestoreBackup.java:1123)
Monitor Dell Server Hardware
Hi everybody, We are trying out OpManager as we think it is our best price/functionality choice. However besides Exchange, SQL, switch, router, etc monitoring features witch are working as expected, we could not get any information about the physical hardware of our Servers. Our server's are mostly Dell PE 28XX and 29XX. All of them have Dell OpenManage installed. We have tried everything we could think off... In device snapshot the Vendor ID is (manually) selected as Dell Inc. The credential test's
Interface issue
Hi there: Thanks for looking to this post... I had been using OpManager V6 for quite a while and it has work sweet. I have upgrade to v7 and notice that under the switches and routers interfaces are huge amount of interfaces (on a router more than 400+) reported. For example, I have a Cisco 3560-48 which has 48 copper ports + 4 gbits ports and I will expect to see 52 physical ports plus virtual ports like VLAN's, Null, etc. Instead, I have 1595 interfaces, some in error but what I see are the same
Security problem! Passwords in plan text!
Trying to get SSH CLI running to a few server, only to find my password, in plain text in the logs! Look, one more CRITICAL security problem with OpManager... stdout35.txt:08:13:29:616 AM SnmpDetailsForm ***** = DynaActionForm[dynaClass=SnmpDetailsForm,isSNMP=,protocol=SSH,nonSnmpCredentialName=,snmpport=,credentialType=,nonSnmpCredentialList={},protocolValues={Telnet,SSH},loginPassWord=MY_PASSWORD,protocolLists={Telnet,SSH},devicename=linux_box_test-03,version=v2,writeCommunity=,prompt=$,passWordPrompt=:,snmpCredentialList={None,FOO
Problems on Interface Monitoring
Here are few of the problems I have found with the OpManager software so far. 1. You continually get 100 % false utilization errors on the serial interfaces. Here is an example. Feb 27,2008 02:36:05 PM Traffic Utilization for Interface Wan Link from State Building to Pilot Road is 100%, threshold value for this monitor is 98% The actual utilization value never got above 92.8 %. 2. After rediscovery of device interfaces, the RX, TX Traffic and Errors will have a value of NA. The documentation says
Downtime Schedules mixes day and month -> wrong date
Hello, when I create an entry in Downtime Schedules it shows for next schedule "Thu, Dec 4, 2008" instead of "Thu, Apr 12, 2008". So it seems it has trouble with day/month and month/day. PS: I am using Build 7025 Regards Alex
No Data Available - disc usage, memory, cpu
SNMP is running on four RHEL5.1 servers. Availability, packet loss and response time all deliver. None of the others will deliver results. Now what?
Add one filesystem for Partition Details of the Device (%)
When i try to add one additional filesystem i have to remove all monitors to add one. Is there a better way? The same is when my Linux server needs a reboot OP7 gives a lot of partition errors, in Linux everthing is fine, but when i remove and add these monitors again everything is fine. Thanks in advance. Gert-Jan
What Happened to MTBF?
I can't find any reports that give me Mean Time Between Failures (MTBF) in OpManager 7. Is this feature missing? If not, where can I find this information?
Cisco Catalyst 6500 interface description
Hello, I test the evaluation OPManager software and i can't read have a correct interface description on Cisco catalyst 6500 (with CatOS). The software said : long haul fiber gigabit ethernet and the SNMP index but i cant found the interface number with this snmp index. Then i can't use the soft for Cat 6500 now. Can someone help me to have the correct port num like 6/4 ??? Thanks,
Problem creating custom Linux monitors
I would like to add a custom monitor that gathers the number of current TCP connections using the command "netstat -a | grep TCP". the result is a simple integer. How can I add this to the existing Linux CLI monitors?
Problem with linux disk space calculation
Hello all, This my first post to this forum. Its just 1-2 weeks i am using OpManager for monitoring about 100 servers. Especilly i am using this tool to monitor the disk spaces of servers. The disk space shown by OpManager for windows servers is fine, but the problem is with the linux servers I found the disk space calculation for windows and linux servers is done using same SNMP OID. This shows exact free disk space for the windows servers but for the linux servers there is 5% added to the free
Problems with interfaces
Hi, In the OpManager 6.0, I added the utilization Tx and RX�s monitors from snapshop device,but now in the OpManager 7.0 how can I do it? Thanks I. Delgado Especialista :P
Cache Hit Ration Values
We have a server running MSSQL 2000 with the SQL Monitor added to it's profile. The values in the dashboard monitors are showing different values from the MSSQL monitor below. The Dashboard SQL Specific Monitor shows 88% while the one below it shows 74%. Thanks, Joe
Correct Utilization
When I upgraded my server memory from 2GB to 5GB then check Asset Details on Snapshot View it still reporting 2GB. Memory utilization is still 100%. Then I edited the Asset Details manually and change 2GB to 5GB. Then memory utilization drops to 85%. My question is does OPManager depends on Asset Details in generating memory utilization. Hope you can provide answer on this. thanks..
Cannot Create Custom Monitors
Hi All, When I enter Admin -> Custom Monitors section, it displays a list of custom monitors I created via OpManager 6. Am I to understand this has now been made redundant and Custom Monitors are now created via Device Templates? If this is the case, I cannot do what I need to do from what I can see. OpManager 7 forces us to select a specific OID from the MIB selected. My problem is, using the UCD-SNMP-MIB I need to select the extResult.1, extResult.2, and extResult.3 values for example. These are
OpManager MSP Business View Reports
I am wanting to write reports on existing alarms associated with business views. Which table has the alarm info in to drives the status of the Business Views? If someone has a query that has this already, that would be great.
Switch Port Mapper - Somewhat works
When I use this feature, it pulls some of the IP's connected to it and sometimes it doesn't. If I choose different servers it seems it it will get IP's not listed on the first one and doesn't get ip's that the other server listed. My question is, is why does switch port mapper not near 100% consistent. I heard it uses the ARP cache, but what is that and how do I update the cache?
Monitor Values not showing
Hi, How can I troubleshoot this problem, can anyone help me? I add a image of the problem. [URL=http://img396.imageshack.us/my.php?image=opmanagerch1.jpg][/URL] Thanks
Next Page