Find out if your Intel system is vulnerable to Intel SA-00086 vulnerability.
Beware! This Thanksgiving, Intel decided to talk turkey about a string of vulnerabilities, Intel SA-00086, that external researchers discovered in their chips. Intel released the Intel SA-00086 detection tool that runs on Windows and Linux systems. But what they don’t provide is a solution to automate the detection for multiple computers. As a system admin it is necessary to run the detection on 1000s of machines in your enterprise network. This can be done in a fraction of seconds with Desktop
File/folder operation Run after
Hello, It would be very useful to be able to choose a "Run after" (like "Install after" for Software deployment) for File/Folder Operation (actually it would probably be useful in any configuration). Do you plan to implement this? Thanks Sylvain
UpdMgr.bat
Can someone please provide the correct UpdMgr.bat file for Desktop Central 9? The file I have has all of the syntax jumbled together.
incorrect time- more than 6 minutes
Hello Can I force a client computer to re-synchronize time against domain controller using Desktop Central? The time is more than 6 minutes off, so Active Directory is not able to correct. thank you Huldar
Update IPv4 settings
Has any one used Desk top Central to update IPv4 settings en-mass ? We have a need to update the DNS records of hundreds of machines. I have been able to use the inventory and inventory features to locate all effected devices but we need to update them. Thoughts or suggestions?
Our WAN Circuit changed along with public IP - Can't figure out where to change WAN IP setting
We changed our WAN provider, and the IP address on our WAN circuit has changed. DesktopCentral is still looking for the old WAN IP address, even though I have updated our FQDN for the server on public DNS. The 'DC Server Sec IP Address' setting is coming up incorrect in the troubleshooter. Does anyone know where this can be changed to point to our new correct WAN IP?
Installation on a computer scope but as a currently logged on user
Hi, we have an application that can be only installed under the user profile. But we cannot deploy this with a Desktop Central "per user" Installation or Custom Script, since our users logon to multiple computers within certain period. So what I need is an Installation or Custom Script configuration that would only be applied for a short period for a confined scope of computers (custom group) BUT has to run once as the user logs on to this computer with his/her credentials. Any ideas how to achieve
Adding existing Desktop Central Server to Domain(Active Directory)
Hi, Currently, we have a desktop Central server which is a workgroup computer. Now we have a plan to move the server to Domain(Active Directory) as per our business requirements. Can anybody help me in getting the dependency of the desktop central server on the domain? will there be any impact on the DC server after domain joining? Thank You Rakesh Mohapatra
Deployment Target filtration is not working Properly
Hi Team, I have a custom dynamic group(TestGroup) which contains computers from 10Local/Remote offices. Now I have a requirement to copy some content to computers from 3 remote offices and those computers also belong to the TestGroup. Please let us know how to do it. I have tried the below steps but did not work. 1st: Selected the 3 Remote Offices 2nd. Selected the dynamic group (TestGroup). Ideally, it should work as per logic but it is not working. Any help here is much appreciated. Thank You
Possibility of moving database to AWS RDS
Hi Folks, Is it possible to migrate Desktop central DB from an MSSQL server to an AWS RDS instance? http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/CHAP_SQLServer.html#SQLServer.Concepts.General.InstanceClasses Thank You Regards Rakesh
Enable and update Windows Defender
Our company needs to temporarily use windows defender. Is there a way to enable defender and then update it through desktop central?
Configuration Deployment Status
It would be fantastic if a feature could be added so that in the configuration summary/execution status window a new state could be added and additional information. As it stands now, when I deploy a configuration there is no middle ground between "ready to execute" and "executed". There is no way for me to know that the DC agent on the target computer has received the configuration instructions and is processing the configuration. It would be great if the configuration summary page would show that
Desktop Central MSP Public FQDN no NAT Local DNS Pointer
Do I have to use a NAT on my firewall for Desktop Central MSP. I have ServiceDesk Plus MSP setup on the same server as my Desktop Central MSP " Just Setup Testing". I have a Public FQDM for both and both are setup on the public DNS. SDP.mydomain.net DTC.mydomain.net. I have setup my local DNS to point SDP & DTC to local server address " 192.#.#.#". From a public computer, I can access SDP using Http://SDP.mydomain.net:8070 and everything works great.. But from the same public computer if I use Http://DTC.mydomain.net:8040
admin denied access to configure in desktop management engine
Hi, I am admin yet i have no rights to configure alerts on the desktop management engine admin page as below; please assist
Domain
Hi, the name our domain is company.cologne the NETBIOS nmae (pre-windows 2000 name): company- col The Scope of Management is to both domain. For example a list of computer Computer Domain PC01 company.cologne PC02 company- col PC03 company.cologne ... Is this a problem? If I define a target which name I have to select company.cologne or company- col ? It does not matter? Regards Rainer
Dwesktop Central - windows 10 privacy settings - disbale location
Hi, I want to disable the location setting in privacy settings. It' possible? Regards Rainer
Self Service Portal Disallow some users
Hello, I need to disallow all my district's students from accessing the self service portal. Is there some way I can do this? Possible hide the shortcut from all users in the Active Directory students group? Or only deploy the desktop shortcut to users that are not students? Thank you in advance for your help.
Desktop central - logfile work admin
Hi, Does exist a log file for the work of the admin . I want to see what have my substitutes done in my holidays. Regards Rainer
Add shared Network Printer issue
I am trying to add network shared printer through desktop central, when I browse 'Shared Network Printer Path', I can't see any printer in the list. Should I install desktop central agent on print server? Can some one provide some details? Thanks, Adam
Visio Pro 2016
Hey All Wondering if anybody has been able to successfully create/install a package for Visio Pro 2016. Cant seem to get it working. I'm trying to set it up using configuration.xml file deployment script within DC Thanks! Brian
Hide the Desktop Agent for certain machines
Hi There, I know you can hide the agent tray icon for all machines. Is there anyway to hide the agent for only certain machines? We have terminal/Citrix servers where we don't want the users to see the tray icon. If not, are there any plans in the roadmap for development? Kind Regards, James.
Error on WAN agent
Hello everyone, Just join the PitStop and first want to say thank you too all for sharing and being such great community. I am running in the some issue with the WAN client configuration for remote offices. It look like the client is connecting as once the laptop or computer connect to the internet and that where it stops... Only initial connection goes thru. Here is the error I am seeing on the client end from the agent: [ 2017-07-05 14:00:37:472 ] [ 5760 ] [ERROR] WaitingForResponse : WSARecv operation
Local users on Windows Servers based on the accounts in User Management
Hi, We're managing a lot of workgroup based servers (Windows OS) which don't have a central authentication solution like Active Directory. What I'm trying to find out if Desktop Central is a solution for this. I read the feature pages and noticed that Desktop Central can manage local accounts on each individual server (or as a group of servers). Correct me if I'm wrong, but.. when a user will change his/her password on one of the servers, it will not change on the other servers.. So is it perhaps
Feature Request Discussion: Distributed Server Repository Download
Would love to see possible feature to allow DServer to acquire needed patches from internet instead from Master Server. Most of remote offices have fatter pipe to internet than between offices.. Not sure if this is already the case but there is no documentation about it except the bandwidth settings between sites and replication schedule.
Computers being deleted the next day after joining DC
Hi, We are having a problem DC (Build Version:10.0.91) where computers are being deleted once the client has been installed on the machine. So when we build a computer we get this message in our admin mailbox. As you can see from this email the machine was built on the 27/06/2017 at 3:23 and as part of the build process the DC agent gets deployed. The next day we get this message in our admin email account. This is only deleting the computer from DC as the computer object in AD is still there. So
MSP integration SDP/DC - Unable to fetch software. DC server version could be incompatible.
Hi When I try to Sync with Desktop Central from SD. I got this error text: "Error while fetching software Unable to fetch software. DC server version could be incompatible." ServiceDesk serverout01.txt - log [SYSERR]|[INFO]|[222]|: org.xml.sax.SAXParseException; Premature end of file.| No errors from DC side. DC version: Build Version:10.0.93 SD version: 9.2 Build 9210
Run a batch file once per computer per user
I have a batch file I want to run for new users that runs some post-setup for an application we use. I want to run it once the first time a user logs in to a computer, and never again for that user on that computer. Can I create a configuration to do that?
Registry Page File Settings
I'm looking to set the Page file to system managed for several 10's of PC's which are currently set to obscure values. I have a regisrty import which looks like: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management] "PagingFiles"=hex(7):63,00,3a,00,5c,00,70,00,61,00,67,00,65,00,66,00,69,00,6c,\ 00,65,00,2e,00,73,00,79,00,73,00,20,00,30,00,20,00,30,00,00,00,00,00 Which works when manually ran on a target PC. I've converted
Remote office IP Server VS Local Office IP Server
Why Desktop Central can't have different IP's for Remote offices vs Local Office.. We want to users outside of building to be able reach DC Server thru internet (aka WAN) but every time I change IP to external network it updates it on all Remote Offices to same IP.. I don't want all of them to be WAN... we have couple location that only has MPLS access to internet and by doing this it will not let them connect to server.. is there feature or work-around to get this solved?
Disabling update on Firefox and Chrome
Has anyone found a way of disabled automatic updates on Firefox and Chrome? Stephen Fowles 3rd Line Support Technician North West Ambulance Service - NHS Trust
Script (.bat) + .reg file
Morning! We are trying to configure automatically the phone extension for our dialer software, getting the extension number from our intranet, and creating a .reg file with the user data and the extension data. We created a collection with the "custom script" for .bat file, and then the "registry" option to import the .reg file, using a local path with a manageengine variable, that looks like this: "\users\$domainusername\uagentsettings.reg" The .bat file works, it creates the file on the c:\users\nameoftheuser\uagentsettings.reg.
Execute .bat before installing software
I have a specific software that does not run from a shared folder. I have to copy it locally, and then execute the installer from the local folder. I am trying with a simple bat as a pre-deployment task, but is failing with the error "Failed! : Incorrect function.". I've read a bit on other posts, and it seems I cannot run a bat on a computer configuration, has to be on a user configuration. Fair enough..then, how is the proper procedure? create a user config to copy the files, and then later run
Agent settings
I need some help with configuration settings for my Desktop Central agent and hoping someone here can help me out. I have a mixed environment in which we have a central office where users would be local to the DC server, for these users the Local office agent would be best. However, the majority of the staff works as consultants at other company's office buildings. Since we have no control over their environment we have determined that using the remote office agent would work best. 2 questions
Desktop Central and Always On SQL support?
Is Desktop Central available to be utilized with a AlwaysON Configuration for SQL - Basically SQL failover cluster (High Availability) We were able to get it to work however it appears that after a few days it loses its connection and the service just stops. We then restart the service and it runs fine for another day or two Thanks,
Scan failed due to incorrect meta files....
To all, I am getting: Scan failed due to incorrect meta files. Please contact support with server and agent logs. Where do I find these logs to attach to this issue? Just manually added the agent to a Ubuntu 16.04 and although Desktop Central sees the device it cannot scan it. Thanks, Preston
PostgreSQL Desktop Central
What is the default username, password and port to connect to PostgreSQL database in desktop central?
Removal of Spotify Application through ME
Hello: I am trying to remove the Spotify application through ME but it fails. Has anyone else tried this? Thank you in advance. Stephanie
Force Google Safe Search into IE/Chrome/Firefox
Hello How force IE/Chrome/Firefox to use Safe Search? Regards
Service Pack Build 10.0.83
Hi everyone, Why my build version is 10.0.83 and manage Engine Service Pack Site is 10.0.73? All the best.
Set IE as default browser in Win10
Is there a way to set IE as the default browser on a Win10 workstation via DC? We use ClickOnce apps -- it works with Edge, but instead of opening and then immediately closing the blank Edge window (as it does in IE), it keeps it open.
Next Page