Fixed port for winmgmt
Greeting! I want to try the appManager and I know that there is a problem about dynamic port assigning of winmgmt. It seems that while the AM center access the 135 port of the remote client, the client's RPC will feedback the available ports to AM Center, and the range of this available ports may be 1025 to 5000. Then I think I can use the rktools.exe for window 2003 and change the default RPC port to a specific ports range. Somehow, a range of ports will cause some network security problem and firewall
Connection refused. The Managed Server xx.xx.xx.xx [9090/8443] may be down.
Hi, Im trying to fetch data from a managed server and I get this error: Connection refused. The Managed Server xx.xx.xx.xx [9090/8443] may be down. The admin server and the managed server are not in the same LAN, the communication between these servers is only via internet. I opened the TCP/UDP 8443 and activated the SSL on the admin server and the managed server, is there something else that I have to do? And of course, when I installed the managed server I put the real IP address and port of the
how to create monitoring in glassfish
how to create monitoring in glassfish
ManageEngine Applications Manager and OpManager Integration
Hi All, ManageEngine Applications Manager and OpManager integrates seamlessly now. With network monitoring connector add-on, you can now monitor your network devices such as printers, routers and switches from Applications Manager web console 8). To find out more about this feature click here. Regards, Applications Manager Support
Add ability to monitor job status in individual subsystems on AS/400
In Application Manager I would like support added to where I can take a specific subsystem on the AS/400, for example QBatch and be able to monitor for a Message Waiting in that subsystem instead of just for the entire system as a whole.
feature request: monitor cygwin
Can we add a Server monitor which will monitor cygwin as an OS? We have a few machines which are Windows OS based, but I do not want to enable SNMP on it.. These machines however have cygwin installed on them to be able to connect to the unix-type interface and use.
Web Services with Intregrated Windows Authentication enable
All, I'm trying to setup my web service monitoring. I was able to successfully monitor a web service that doesn't have Integrated Windows Authentication , but I have not been able to so do when it's enable. I receive the from error : Problem while accessing the WSDL URL. Check if the WSDL URL is accessible or the UserName and Password is correct : java.net.ProtocolException: Server redirected too many times - Also both Web Services are on the same web server. Any help would be great! Carl
Bulk Configurations
Hi, We want to update the user name and password for the DB Query monitors in Bulk Configurations, as we will have about 100 DB Query monitors, and we need change the password every month. Please help as it will be very difficult to update the password manually every month. Regards, Surbhi Garg Goel
Exception while trying to acces the url java.io.IOException
We have Internal URL's which uses AD user authentication for logging in, when we try to configure the URL's montior we couldnt able to motior the same. It throws up the error " Exception while trying to acces the url java.io.IOException" Pls request your help to solve this. - Vijay Vigneshwaran r.vijayvigneshwaran@gmail.com
How to monitor a WebLogic server through T3S
Hi I am trying to connect Applications Manager to monitor a BEA WebLogic Server version 8.1. This application server runs very sensitive information and it is very secured so the only way to get connected to it is via a t3s or https protocols, it is not possible to use the non-ssl t3 protocol. My question is: It is possible to specify the use of t3s protocol instead the default t3 protocol in the AM configuration? I have also noticed that AM requires "weblogic.disableMBeanAuthorization" and "weblogic.management.anonymousAdminLookup",
Applications Manager version 9.1 released
Folks, Applications Manager release 9.1 is now available for download on our website. This release offers some new capabilities as well as enhancements to our existing set of features. Here is a quick glance at what 9.1 offers: Anomaly Detection to help you detect potential threats to application or server performance. The 'Anomaly Dashboard' facilitates viewing all the performance metrics in one place. Real Browser Monitor for proactively monitoring the availability, response times and page loading
Facebook application monitoring using URL Sequence Monitor
Am having a hard time trying to configure a URL Sequence monitor to monitor a Facebook app. Here are the steps am trying to do 1. Visit www.facebook.com 2. login using the login form in www.facebook.com 3. Visit the facebook at http://apps.facebook.com/thingsiwanttodo 4. logout of facebook.com I think facebook uses a lot of hidden and dynamic parameters at step 2 and 3. Appreciate if some share their experience in successfully monitoring a facebook app. In step 2 i give the below params in the Advanced
Embedded Session ID in URL
We've been trying to find a product that does lots of different monitoring (URL, Web Service, URL Sequence) etc. We have been using SiteScope but everytime a new release shows up some basic functionality disappears BUT you can buy it back from HP. We decided to give ManageEngine a try and found it MUCH more business oriented. We've tested almost everything but we found one issue that doesn't seem to work (and I've been reading the manually). We have some URL Sequences that we need monitored but
Automatic email to notify users of scheduled downtime
When you schedule an outage in Applications Manager Downtime Scheduler (Admin -> Downtime Schedules -> New Schedule), we want an email to be automatically sent out notifiying users of the planned outage. Is there a feature in Applications Manager that provides this functionality? Thanks, Gavin Applications Manager 9
Add SQL multiple instance support
I would like for App Manager to add support for monitoring multiple version of SQL running on a single SQL server.
Email reports exception occurs
Applications Manager 9 (Build 9005) I need help...I am having issues sending reports via email. My alerts work fine so the actions are correct as well as the mail server setup. I select my report and click the email button > Email Report > To Address (selecting the email address action address). Click the send button and I get "Mail sent successfully" but nothing in my Inbox or Junk folders. I see in stdout.txt the following. ======= Date% TIME% *******the dir exists*********C:\Program Files\AdventNet\ME\AppManager6\Reports/EmailPDF
Can not create Jboss monitor
Hello, While trying to creat a monitor for Jboss, I have an error: "jndi not bound" http-invoker.sar is correctly deployed in my server... Could you please help me? Thanks by advance and BR, Tim
Running SQL
Hi, I have created a MS SQL Database Server monitor and would like to alert based on the results of a query. For example: select count(*) from [db].[queue]; The SQL Server Management page says "SQL server monitoring has the ability to connect to the database source, process any query received in the database..." which suggests that I should be able to run queries and therefore do what I would like to do. TIA. Simon
Service fails to start after boot
Hi, I have eventlog analyzer and application manager running on their own database. The applications work fine but the service for application manager fails to start. Is there any dependency that I need to configure so that the service can start normally? I can't have an application manager service that fails to read performance information from other servers...
Cannot configure Service Level on Application Manager
How I can configure the Service Level in Application Manager. I would like to see if the a service (group of monitors) has some problem only when the Average Availability is less than 99% (for example). Is it possible? Thanks, Roberto D.
Error parsing MIB:SM10_R2.MIB
Hi all, I get an error trying to load the attached MIB from IBM when setting up a trap listener. Error parsing MIB:SM10_R2.MIB ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Any thoughts? Thanks.
Manage Engine - Application Manager - Schedule - Report
Hi .. We use application manager as a reporting tool and also to find the performance related issues in weblogic integration servers ( Clustered enviroment ) In the ManageEngine Application Mgnr 8, I have the default monitors which says about the health statistics etc for each managed server in the cluster. When I select the reports tab in the application, then select the proper monitor ( managed server here in select box ) i get all the statistics regarding that managed server...i.e Summary Report
Application manager not start on reboot.
Hi, Im running AppManager 9.9005 and have some issue. When the server reboots, i need logon a run startApplicationsManager.bat file to start monitoring. I'm working with Windows 2003 R2 SP2 and "Manager Application Manager" service are Automatic state and running. Thanks.
Impossible to start Application Manager
Hi, After un reboot of my server AppManager don't start. Initializing server and stop !! Thnaks
Application Manager 9.10 windows to linux
Hi, I download application manager 9.10 and I am been probing this version for windows. I have configured my entire network, and now I would like to probe the linux version (linux plataform). I already install the same version in a linux machine. I try to make a backup in the windows machine, and then restore data in the linux machine but doesn´t work. How can I do this? It´s posible? I don´t wanna put my entire network again. Thanks, Regards.
New or modified Monitor Group Availability Reporting option
A modified "Services Group" option that would have the ability to add a Weight or Score value to each individual monitor for a given Monitor Group. This custom value would allow us to set monitor importance/dependency for that particular monitor group, default would be 0% and an unlimited total for all monitors combined. Example scenario would be: - Web Application 1 (Monitor Group) - (Monitor) Web Server - Score: 100% dependant (if this is down, the group is down) - (Monitor) WebLogic
How Application Manager works
Hi, Can some one point me to some documents or help me understand the internal working of application manager. Say for example, In tomcat server what does response time in ms mean? Is it the time taken for a request coming from a different client to get processed or does the application manager ping the server to measure the response time? What exactly is happening if we dont have the agent installed on the tomcat server side? Thanks.
AppManager monitoring output for external page
Hello, I need to have a monitor status on a company page. This page is used by users to view infos regarding some processes. I would like to add also info about our servers status which is monitored by the AppManager. The problem is that I need to show the status only in simple way, not as it is in the AppManager. Is there a plugin or a way how to solve this? How to link AppManager to HTML popup so it will just show two messages. Server Running, Server Down, etc. Many Thanks for your help. Pavol
License expire
Hi everybody I have applications manager and service desk plus, but the license expire today, will the software keep working? For Application Manager...will monitoring? or not? Regards, Jairo
AppManager Keeps Asking for Login
Almost anytime I select a report or make a configuration change in AppManager, it goes back to the login screen and I have to login again. Is there something I can do to fix this?
Scheduling a report.
Hi .. We use application manager as a reporting tool and also to find the performance related issues in weblogic integration servers ( Clustered enviroment ) In the ManageEngine Application Mgnr 8, I have the default monitors which says about the health statistics etc for each managed server in the cluster. When I select the reports tab in the application, then select the proper monitor ( managed server here in select box ) i get all the statistics regarding that managed server...i.e Summary Report
Downtime Forms
Hi, I'm working in a company that supply manager services and hosting to many customers (that include many servers, databases, applications) The most important kpi that we have to delivery to our customers monthly is the uptime. Some times AppManager didn't get a downtime when this happen very fast. I set pool interval to 2 minutes and we can have a restart in one of our databases for example. Basicaly, what I'm propose is a kind of downtime forms. A new "tab" where we can chose a monitor, and insert
Send email for planned downtime
Hi, When an downtime is entered ("Admin"-> "Downtime Scheduler"), is is possible to have an automated email sent? Alternatively, is it possible to have a script run every hour to find out what downtimes are currently scheduled?
Does Application Manager can not monitor two SQLServer instances in one server?
There are two SQLServer instances in one of our servers,one is SQLServer2000,the other is SQLServer2005, now,i want to monitor both of them(SQLServer Instance),so i do as follows: step 1: create a new monitor ,add SQLServer2000 in this monitor,it's successful,and application manager can receive data from this instance normally,so i can see the status of my SQLServer2000. step 2: create another monitor ,add SQLServer2005 in this new monitor,it's successful too,but,when i click "poll now" ,it show
Server Status on a web page
Hello, is it possible to create a pop up on a page, which will take server status from application manager?is there a plugin for this or any possibility how to do that? I need to monitor few servers so the users can check intra-net page and see if the servers are up and running. We use in our company Application manager so would be great to implement it this way. Many thanks for help
Adding Thresholds To Multiple Script Monitors
I'm attempting to add thresholds to a group of script monitors I have in bulk. My process for doing so has been to go into one of the individual monitors then to "configure alarms" for the given attribute, then checking the box to "apply to selected monitors" and selecting those that apply. The threshold configuration appears to hold on the individual monitor but ignores all others that I had selected to apply to as well. There are approximately 65 monitors in total to which I am attempting to apply
Change Language
Hi I want to know if is posible change the language of AppManager without uninstall the application. Do you have any procedure to do this?
Schedule Outage on Monitors
Hello, We use App Manager to monitor Weblogic server,URL's ,Database . The monitors will trigger an email when the resource is not available. How to Schedule an outage on the App Monitor during the Outage Window, so it doesn't trigger any email. Thanks
MS SQL Monitor. Alarm caused by "The database xxxxx is removed"
Hi, It seems our application keeps creating and removing a database and because of that I keep getting an alarm. How can I disable this alarm? In my MS SQL monitor, I have eanbled "Database details" because I want to monitor each database. Health is critical. Root Cause : 1. Health of IF-sgsin1s001.sg.vopakasia.com_MSSQL-DB-server_1433 is critical The database xxxxx is removed
Build 9110 - what has been fixed?
What has been fixed in 9110? compared to 9100?
Next Page