APC powernet MIB
I am trying to set up SNMP trap monitoring for my APC UPS, but when I try to import the MIB I get the following error: Could not parse the file C:/ADVENT~1/OPMANA~1/./mibs/powernet395.mib. Couldn't resolve these MibNodes : { cpsGroupIndex, cpsSPortNumber } Any help? (I've attached the MIB, renamed to .txt and zipped for size) thanks!
Unable to find the switch port mapper in OpManager build 8007
Hello, The instructions for accessing the Switch Port Mapper changed in OpManager 8 from OpManager 7. In 8, the instructions in the Help state the following: Switch Port Mapper OpManager shows the connectivity between a switch and other connected devices in the network in Switch Port Mapper. You get the details such as the MAC address, IP Address and DNS names of the devices connected to the switch. You need to provide the details such as the community string and port number of the switch and if
Cannot add a device properly
Okay, bit of a weird issue here. On Opmanager V8 build 8007 I am trying to add a Cisco 6506 IOS based switch. I supply the snmp credentials (which are common to a whole bunch of switches) and the host name , it comes back with some information that the device is "unknown" so I save it and try to add the snmp strings manually, it tells me that the device does not respond to snmp !!!. Download and install the free version of Opmanager on another server , supply the same snmp credentials and host
Monitor Multicast Stream
Hi, Is is possible to get Opmanager to monitor Multicast Streams? We use Real Time Display on our phone system that send data to clients via multicast, we would like to monitor these streams and be aware of any issues. Is this possible? Cheers
Linux Memory monitor.
Hi, I'm receiving 90% - 100% alarms on linux memory monitor, because linux allocates about 75% or so of it's memory to the cache. Is there a work around for this, a MIB? or a Monitor? Thanks,
Restore Data
Hi, I am using Opmanager 7.202, I would restore data but it occurs an error. Please refer to the attachment. I have already tested on the 7.204 version, but it occurs the same error. Thanks
DATABASE ERROR very urgent
Hello, i m having very important problem with opmanager Version 7505 i have licenced it 1000 device. today i have had difficulty of adding a device , it was showing it is added and when i have tried to search it ..it says i have to add it again, so i have search the forum and find that it might be partialy added so i have used the script RemoveDBEntries.bat after that i have restared the opmanager but it wasnt. and it gave me error, when i try to login . and told me to run RepairDB.bat.
OPMANAGER 7 (7205) CRASH
Hello , i have installed opmanager 7 (7205) with licence 1000 devices. a dayback it got crashed , now i m trying to restore it. i have backup of it. now, my question is In my last instalation i was saving opmanger database on my external disc and as per opmanager i have modified my batch file startMySQL.bat under \OpManager\bin folder and make the changes as below. Look for mysqld-nt -b .. --standalone --port=13306 --innodb_flush_log_at_trx_commit=2 --key_buffer_size=256000000 --query_cache_size=128000000
Custom CLI Monitor History for HP-UX Not Being Saved in OpManager
Hello, I have several custom CLI monitors that run processes on our production HP-UX servers to provide load average, I/O wait time, wait queue, etc. Theyrun fine and display properly in OpManager, and the alerts work fine too. However, the data is not saved in OpManager's databse, which means I cannot report on daily, 7-day or 30-day trends. We look at these things quite closely and having the data stored in OpManger like other CLI/SNMP/WMI monitors within OpManager is very important. When
Process Monitors seem dependent upon PID
Hello, Windows and UNIX process monitors used to work where you could add them and when they went down and came back up, OpManager would record that they went down and came back up. Now, when a server is restarted (for example), the process monitors still show them as down when the processes are actually up. I am assuming this is because the process IDs changed. The documentation for OpManager states that we can track processes via path and arguments as well as the number of instances. No mention
CCTV view ?
Hello, how can we connect Plazma TV to OpManager ? Best regards, Z
How to create a SNMP Trap Processors that disabled certain alarms
Hi, im having problem with an alarm that sends the following all the time from several cisco routers in our network, i want this message to dissapear because it doesnt report a specifib problem as far as i know, it is just very annoying that the bussines view goes organge all the time because of this: Status: trouble sysUpTime.0: 18 days, 0 hours, 50 minutes, 25 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.5 , .1.3.6.1.4.1.9.1.620 S-94126-Alektum.se.sn.net Cisco IOS Software, 1841 Software (C1841-ENTSERVICESK9-M),
Discover new device ...
Hello, I have some problem since upgrade OpManager ... When I discover and import device, my IE totaly block, and I must turn off, sometime IE sometime PC ?! Please help!
RemoveDBEntries tool
Dear support team, I've occasional had to use this tool to clean out duplicate device entries on Opmanager 7. Now that I've migrated to Opmanager 8.007 will the same tool work, or is there a newer version I should use? http://support.opmanager.com/sd/AddSolution.sd?solID=1808 Thanks, Andy
How to view associated Custom Monitors configured for a device via cli.
Hi, I had a custom monitor associated for 13 of my switches, i deleted the monitor through the UI but i am still getting alerts from the devices regarding this monitor. As i do not exactly recall the Monitor name, can i search the mysql database to see what monitors are attached to each device, allowing me then to delete them via the cli.Cheers.
Removing Devices
How can I remove a device for the Ops Manager
Modify Vendor in Device Template
I created a device template with the wrong vendor. Editing Device Template will not allow me to change vendor and I can't find how to remove the Device Template to create a new one.
Features of the business view editor
hi, I was wondering not sure if this is a repost, will their be an expandition on the business view editor. It is become more of a pain to make BVs since some of my device name is to long to read. It use to be easier to do it Opmanager 6 when you used map maker to search by ip and add the device and able to rename a business view. When you have a typo and have added quite a bit to the map. Its just time consuming to redo it.
How to make an event of a device not trigger error again
Hi, i have this router that gives the following error every hour: sysUpTime.0: 11 days, 23 hours, 54 minutes, 59 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.5 , .1.3.6.1.4.1.9.1.620 S-94126-Alektum.se.sn.net Cisco IOS Software, 1841 Software (C1841-ENTSERVICESK9-M), Version 12.3(11)T10, RELEASE SOFTWARE (fc4) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 03-Mar-06 17:40 by dchih i can not be able to solve it neither do i know
Availability Report - v8007 Still Has Problems with Time Windows
We can only create availability reports using a 24hr time window with periods specified as "This week", Last week", "This month", "Last month", "Last 7", "Last 30". If we specify any other time window we get the error "Data not available for the selected period.Please select a different period" Wasn't this supposed to be corrected in 8007?
Import a Opmanager 7 database to opmanager version 8
Hi, We are trying to export the database from version 7 to version 8, but when we import into opmanager 8, doesnt appear any error, but doesnt work, do you know if we need to do any migrtion process ?? Regards, Diego diegotam@gmail.com
AS400 MONITORS. CPU OK, DISK OK. RAM MONITOR BAD, TELNET SESION BAD
With the old version 7 ( free version opmanager) The status for RAM, CPU and Disk monitors were OK. But Now whit the new version 8 (professional licence) I dont see the RAM monitor please view the following image: 2.- , I do not know that I must put in the field of commandpromt, please check the following image: When a telnet connections is open in my as400 , the prompt command is teh following screen ( logon screen)
feature request - performance monitoring of custom applications
hi my company runs the biggest online retail website and travel portal in south africa and i would like to monitor the performance of this application this app (including many other internal apps and a few external apps) do publish performance information to WMI and i wouldd like to see a feature implemented in opmanager where i can(like with the CIM studio) browse the WMI tree and tell opmanager what to monitor and how to monitor it, reporting on it as well..(almost like the mib browser) MS
Utilization not perfectly shown
Dear Team, Please find attached the screenshots of the problems faced. The issue is i can see the rx & tx traffic when i click on the device but when i go ahead & click on the interface which is showing the utilization there is no traffic shown in any of the graphs. Version of opmanager being used is 8007. Thanking you, Dilip Khanolkar, Mobile: +919769107738.
Custom SNMP Monitor behaviors
1. It would be nice to be able to EDIT a custom SNMP monitor once added. Right now, once added, you must delete it and then re-add it -- very cumbersome. 2. There is no way to view customer SNMP monitors other than going through the Device Template area or Performance Monitors area on a device. There should be a link under "Admin" to view/edit Custom SNMP monitors 3. In the MIB browser, it should be enhanced to tie in with the existing credential database and device database rather than having
Issue with Drive Space Report Scheduling since upgrading to latest hotfix report format is all over the place and does not show graphical bars
Since recently upgrading to the latest hotfix of opmanger the scheduling reports format has gone all over the place. I believe this is since putting back the graphical bars in the report as requested by myself. Please could you fix this isssue asap please. I believe it is probably just resending an up to date version of the schedulereport classes.
Opmanager interface status alerts
I am trying to manage a routers inteface which is a isdn and would like a alert of when this interface comes online. There is a operational status which says dormant I would like to get a alert of when this becomes up. Is it possible in anyway to configure opmanager to do this. The alert would be by an email. Help or advice would be appreciated.
Shortcut Errors in Biz Views
Whenever I create a business view (view 1) with a link and shortcut to a 2nd BV (view 2) when a link and shortcut back to view 1 is created the icons for those shortcuts on both business views eventually turn red. Fortunately I don't get an alarm but it would be very useful to have the ability to create shortcut arrangements like this without them turning red. Is this easy to fix? Thanks.
Windows service monitor reports
I have reports running fine for services (web, ftp etc) but i would liek to be able to generate reports for windows Services as well ( Microsoft Exchange MTA Stacks, Microsoft Exchange System Attendant, etc) is their a way to do this??
switchport mapping doesn't work on Nortel 5500 switches
I install oputil 5.6 today and try to retrieve switchport mapping on Nortel 5520 switch, but it failed.
switchport mapping doesn't work on Nortel 5520 switch
When adding new switch (Nortel 5520) on switchport mapping, it keeps failing on scan. Any clue? I have the latest Oputils 5.6.
switch port mapping doesn't work on Nortel 5520 switch
I download and install the latest version 5.6 today. But when I try to add a Nortel 5520 switch on switch port mapping, it always failed. Is Nortel 5500 series being support by version 5.6? And any suggestion to fix the issue?
SNMP Trap Receiver - viewing snmp v1 vs v2 traps
Hi, I was using the SNMP Trap receiver snmp tool for viewing the received snmp traps. When i receive snmp v1 trap the trap details such as name, OID are displayed properly. But when i receive the same trap as snmp v2 trap, the details such as name, OID are displayed as 'null'. Please see the image below: Here the first entry which has null values is a snmp v2 trap, whereas the second entry with the proper name and oid value is a snmp v1 trap. Both the traps are generated from the same source (JBoss
Upgraded to 8007 - "Your license doesn't support the Realtime Traffic Widget"
Do I really need to purchase a license for this feature?
OP Manager Languages
Hi everyone, I know when you initially install OP Manager you can chose the language. However after it's installed, is there anyway to select the language, or have language preferences? Like in service desk you can click "Personalize" and select your language. Op Manager doesn't have that option under "Personalize". Reason is here in the US we are using OP manager, but we're about to start monitoring some of our overseas equipment with our German office. We would like the technicians there to also
Credential Problem and Feature Request - HELP
How about under quick configuration wizard adding: Remove Performance monitors to several devices(SNMP, WMI and CLI) Remove credential from devices As for the credential problem - I don't know for sure but either one of our domain admins changed the OpManager windows password (unlikely) or the credentials defined in OpManager became corrupt and we have a log analysis tool that began reporting/alarming on failed logon attempts to various windows servers so rather than going through each server individually
ManageEngine consultants needed
Hello ManageEngine User, I'm looking for consultants who know ManagEngine products and experienced enough to architect, design and troubleshoot IT networks and infrastructures. Deep Analytical skills needed. Must have strong Communication skills. US citizen preferred, but not necessary. Security Clearances Desired. For more information, please contact me at: Eric Wegner AdventNet, Inc. 10 Cornfield Lane Asbury NJ 08802 Phone: 732-801-9083 Email: eric.wegner@adventnet.com IM: evwegner@yahoo.com
Creating Custom CLI Grid-Style Monitors
Hi All, In OpManager's built-in CLI Monitors, say for HP-UX, the ability to show the results in a table or grid appears to exist. I would like to do the same in a custom CLI monitor where a shell script would return several rows of data that should be dsplayed and monitored, each with is own threshold and re-arm values, as well as units of measurement. I already know how to create custom CLI monitors that call scripts and return results that are parsed as per the HostResource.xml document. I
Exchange Mailbox / Public Folder Size Monitoring
We are in the process of setting up Exchange monitors using OpManager, Build 7205. In setting up our backend servers to be monitored (the servers that house our mailbox stores and public folder stores) I don't see any options for monitoring the size of specific mailboxes or specific public folders. Is this something that the Exchange monitoring add-on provides? I've tried searching through the OpManager forums regarding mailbox size and public folder size but haven't seen very much on this topic
Performance Monitors for F5 LTM 1500
I've created a F5 BigIP LTM Device in OpManager and was able to get it added as a device. I'm trying to configure Performance Monitors so that I can make use of the MIB provided by F5. However, it appears that none of the Monitors are able to retrieve data. I ran a tcpdump on the F5 for this snmp traffic and I get Requests and Responses such as: 17:14:58.502782 192.168.2.8.44494 > 192.168.2.1.snmp: C=***** GetRequest(33) E:3375.2.1.3.1.2.1.3 (DF) 17:14:58.551630 192.168.2.1.snmp > 192.168.2.8.44494:
Next Page