How to install 5.5 over an existing installation?
Is this possible without losing existing historical data or custome graphs? Cheers
disk storage via snmp
Hi, Two questions, 1) I use net-snmp via freebsd (5.2 version (recent)) I receive cpu/memory but no disk storage (four partitions) is it possible something breaks with multiple partitions via net-snmp (It thinks it is a Linux Host) 2) Is it possible to get graphs via each individual partition? I saw the previous thread but it did not mention how to say "/var" or "/" Awesome product - I've used many others for Windows and currently use Nagios but this is quite a setup - 10 devices for free is also
Opmanager 5.5 - not naming routers corectly + Bandwidth iss
Testing 5.5 before I upgrade our licensed 5 version of Opmanager. Have run a discovery and it has found my Cisco routers, however, the name of the routers tends to be the broadcast address of one of the links and the links are not reporting the correct bandwidth even though I have bandwidth settings on the routers. 5.0 discovered them ok! Doesn't Opmanager get the hostname from SNMP and use this? Some of the routers come up as unknown too (all cisco 2600 series) whereas some are correctly marked
Features for new releases
Hi, I'm using NetFlow Analyzer for about one week and I can say I really like it. It has almost everything I need for analyzing netflows and it's quite fast. First few questions: How long the data stays in database/and in which resolution (10min, 1h,, 1 day...)? After some time that data is deleted or what? Is it possible to make backups? Now I have some suggestions for future releases . 1. something to change the size of graphs - to make it bigger 2. something to fix max value on y-axis (per interface
How to configure the event log monitoring
Hello, the enhancements witch commes with SP 3 are great. Anyway I cant get the event log monitoring running, these are the steps I have done: 1. I enabeld the Window service monitor for the server �nd added the event log service --> it shows green 2. I created a new event log rule and installed it with the quick configuration wizard on the server 3. I created a log entry, but nothing happened? What did I wrong?
Service Pack 5010 available for downloading.. problems
I just downloaded the service pack 5010 from your website, but I'm finding some problems so far. I've installed and uninstalled a couple times. The first install, the cmd window seemed to be stuck at refreshing a full screen of OKOKOKOK. Uninstalling - Reinstalling Service Pack: I uninstalled OpManager and ran a new install of just OpManager5. Then I went to install the service pack, but the installation informed me that the service pack was already installed. I deleted the folder inside the bin\backup
Confirm the price before deciding...
Hello, i just want to confirm the price for buying Opmanager 5.5. Its price is 795$ with unlimited monitor nodes. 8) ps: due to my experience, i used to evaluate one monitoring tool about 2000$. I sent my environment to the sales to confirm the price on web. Wow! the price from sales is 70,000$ and he said that the price will depend on nodes.
New Features in upcoming OpManager Release (Build 5.5)
Here is the list of features planned for the upcoming OpManager 5.5 Build by December this year. 1. URL Monitoring 2. Windows Event Log Monitoring 3. Windows Services Monitoring 4. Firewall category in Infrastructure Views 5. Quick Configuration Wizard 6. MIB Browser in HTML client 7. More report presets � This month, last month, this week etc. 8. Reports and Graphs enhancements � Custom reports 9. Reports - Printer friendly view and export to PDF 10. Rediscover option for devices 11. Rules-based
High CPU-load all the time
Hi all, after the sucessfull installation of OPManager on a Windows XP-Host (768 MB RAM, 1,8 GHz) i've recognized that the CPU-load is permanently above 80 percent. I'm monitoring about 150 servers (Windows 2000, Solaris, HP-UX), 200 Switches/Routers and a few printers. I've reduced the monitoring interval to 10 Minutes for each item (except printers, set to 60 Minutes.) The javaw.exe process is consuming about 40-50 percent, also the MySQL-service. Should I switch to a monitoring machine with more
Snapshot issue
Hi, Since I upgraded, I'm able to have the information regarding CPU load, memory utilization, disk usage... thru the java client, but not thru the web.... any idea of the issue ?? (windows 2000 & 2003 servers) I already check the login passwords infos, tried with domain\\username and domain\username... Thanks,
OpManager on......Windows vs UNIX
hi all, i just want everyone to share idea or feeling which choice is better between Install opmanager on Windows VS on UNIX. i just want to compare the advantages and disadvantages. thanks 8)
Change Catagory
We just completed the upgrade to service Pack 3. I was looking forward to being able to change the category of items into the printer and firewall selections. Where did they move that option too? It used to be on the right hand side of the screen towards the bottom when you had a device open. Now I can not locate it.
AdventNet ManageEngine NetFlow Analyzer 4 released
ManageEngine NetFlow Analyzer is a bandwidth analyzer that harnesses Cisco's NetFlow technology to provide valuable information on what applications are using the bandwidth, who is using them and where traffic is headed in the network. Go to NetFlow Analyzer Home Release Features ManageEngine NetFlow Analyzer 4 includes the following features: General Features Support for NetFlow version 5 exports. Web-based interface for viewing the network traffic details as well as performing administrative tasks.
5.5 Java Client - URL snapshot not available from URL Map
Something came up today and I wanted to share tracked response times of a URL I started monitoring yesterday with OpManager 5.5. As these custom graphs and response time lists are printed more easily from the java client, I launched the client, and found the URL map has no right clicking options at all, neither is there a capability to see any detailed view of any of the URL monitors I have listed, from the java client. Is this as intended? ...As far as everything else I'm seeing with this new version,
GMT
I have noticed that the date of all data collected is in GMT. Here in Brazil we are using GMT-2 at the moment. Is there a way to change the default to GMT-2 ? Thanks, Elton Pimentel.
error during start of OP-Service
Hi all, i have done a new install of OPManager on a Windows XP professional host. after sucessfull installation, the setup tries to start the service. after a couple of minutes it ends with an error, that the service could not be started. I've tried to start the service manually, but after a few seconds, the service terminated unexpectedly. What's wrong ? thanks Uwe
OpManager 6 released soon?
Hi, I'm working at a company that is looking into buying this promising product and I see (according to the forums) that features that we would especially need a dropping one by one recently. (URL monitoring, Exchange support ect..) 8) Do I understand it correctly that a new major version (Version 6) will seen be released in january? regards, Halldor Hrafn
New Feature(s) - Wish List
I'm very impress by all the software you create. Congratulation ! But Would it be possible in the future that you think about a way to run multiple of your softwares on the same machine ! There is so many ports opened that it is almost impossible to run simultenaously even a few of them...and not only software created by other companies on your Web nms systems (ie. ACS Airespace...) I would be interested to buy other softwares, but I only have one monitoring system... Many Thanks,
SNMP version
I am evaluating the software on my network and it is all working almost fine. The problem I am having at the moment is to manage my servers on my DMZ. My firewall logs a drop package with the following description : "SNMP version earlier than version 3". My questions are : 1 - How should I proceed to use SNMP version 3 on OP MANAGER ? 2 - How should I proceed to configure passwords an authentication using SNMP version 3 ? Yours sincerely. Elton Pimentel.
Mail setting & Disk space usage
Hi, I am currenty evaluating the software and once satisfied planning to buy the unlimited edition. I have following queries 1) Does the Freeware has the facility to the monitor the space usage drivewise in addition to the disk usage( e.g. c: d: e:). I just went through the reply to a similar query wherein it was specified to goto admin-> tool->, but I could not locate tools under the admin TAB. Please let me know 2) Eventhough I have set email settings properly, it does not work. Thanks.
Monitoring Servers
Hello, We are evaluating OpManager to use it to monitor servers that are behind a firewall across a WAN. The monitoring server in on thepublic Internet. Questions: 1. What ports do we need to open at the remote firewall to monitor the server behind it? We have already opened 161 for SNMP but the WEB and SMTP services remain down even though they are up and accessible from the outside. 2. How can we monitor an Exchange 2003 server on these servers? Are you using WMI? If so what ports do we need to
Actions to problems
Does OpManager support a way of responding to certain problems? For example if a windows service is acting up, could you have OpManager automatically (depending on criteria) restart that service ? If not this would be a great feature. I've seen this feature in other monitoring products.. however they don't come close to the level of wide monitoring-support your products seems to have. regards, Halldor Hrafn
List of supported devices?
Hi, Do you have available a list of know supported (monitored) devices/services? Example; does the following devices work? Windows 2003 servers Linux IIS Apache POP3 IMAP Exchange IOS Cisco routers PIX Cisco firewalls VPN Cisco Concentrators Checkpoint Firewalls Catalyst switches ect... regards, Halldor Hrafn
Exchange
How should I proceed to monitor Echange 2000 and Exchange 2003 ?
How to Change Opmanage 5.5 as Windows service
I install it as standalone application on Win2003. What should I do to change it to becomes Windows Service ?
Netflow Analyzer Database Purge
We are evaluating the Managengine Netflow Analyzer tool. Can someone highlight on how to purge the database in this software? Thanks in advance
Alert Configuration link for Disk Utilization throws Error
When clicking the Alert Configuration link for the Disk Utlization of some Windows monitor instances , it is throwing error. ErrorMsg: java.lang.NumberFormatException: For input string: "null" at java.lang.NumberFormatException.forInputString(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at jsp.ThresholdActionConfiguration_jsp._jspService(ThresholdActionConfiguration_jsp.java:540) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
Deleting routers after stopping the flows
Hi, I stopped the flows on the router by clicking the Stop button on the Dashboard view page. Then I deleted all the interfaces for the router from the License Management page. Now, I am trying to monitor that router again and started sending flows but I dont see the router in the UI although I have unlimited trial license. Can you help???? Thanks Tim
Runtime error
Sir, When I edit the services on the admin page. Once I click the "update" button. It's always show a runtime error windows. Pls refer to the attachment. Why? Samuel.
Service start/stop: apache and mysql ???
Is it just me or: when I use net start or net stop on the manageengice opmanager service, it doest stop apache (2 processes) and mysql (1 process) ? Don't you feel like it should terminate those process since they go with your service :)
Online demo not alive!
I tried the online demo link to OpUtils and got a timeout response. Is this a known issue? Thanks, Mark
New Feature(s) - Wish List
Additional Criteria for monitoring - I would like the capability to monitor services, based on a condition. In otherwords for our clustered servers it would be useful to only monitor services on ServerB, if ServerA is not available. For our clustered Exchange servers, it's only useful to monitor exchange services on the active clustered server. If the primary fails, the exchange services which were inactive to this point on CluserteredServerB, should now be monitored. I would create a notification
Pix Firewall infos
Hi, I have a pix 515 and when I detected it, it got detected as a cisco terminal router... I changed the type manually to cisco pix firewall... By Default it got into workstations map... I moved it routers map... 1- Why can't I see cpu usage ? 2- If I click on an interface, they are listed as UnManaged why ? 3- On each interfaces I click manage... I still cannot see any data neither graph... 4- Why can't I see the route table ? Basically, are cisco pix supported beside just being able to add them
Feature Request: Per device url(s)
It would be really cool to be able to define a per device url. For example pix, catalyst etc can use a http server for monitoring Hp Servers provide html pages for snmp agents etc So on the device page, It would be cool to have one or many customizable urls. If you do it, it would be cool to have no restrictions ie: Even if the device ip is 10.10.10.10 we could add an url like telnet://www.com:5858 https://10.10.10.10 http://thisisvalid ...
Adding a non-snmp device
Hi, I tried to add a device manually and when I try to do it, it prompts me for ip/mask/snmp port/community How can I MANUALLY add a device which is not snmp enabled ? Using network discovery adds it no problem but I want to do it manually so I don't get a huge amount of craps in the interface :)
Feature Request: Disabled Port Status
Hi, We are currently using IPSwitch WhatsUp Gold and there is a feature in there I would suggest. When whatsup Gold Probe a net device, it can make the difference between Port in Up and connected Port is Up but disconnected Port is Shutdown It would be cool if you could make the difference between "the port is working but nothing is pluggued in" and "the port is not working -> shutdown" It's fairly easy to do while querying the snmp agent, all you would need to do is have 3 png instead of 2... Just
Devices will not move into a business view
Sometimes when I attempt to add devices to a Business View they will not appear on the Business View. After I attempt to add them to the view, they will no longer show up on the properties list in either the �all devices� or �devices in business view� list. Is there any way I can correct this?
I cannot get CPU, Memory Snashort at FreeBSD servers
Hi, I have trail the pro. versiona and try to get my FreeBSD server info. I have already install SNMP in the server and during discovery, the server show the "blue" stars in the right hand corner, that mean the SNMP agent is OK ? but i cannot get any resource? pls help !!
Bandwidth usage, Interfaces index with IP info
I've downloaded it and installation is easy. I've been using it for more than a week already and I must say I'm impressed and results looks good too. My questions are: 1) When collecting the netflow data across WAN using 2MB or less links from 5-10 remote Cisco routers, it there any overhead on the bandwidth or rather whether it can cause congestion on the links? 2) Under "All devices-Dashboard view", with the correct snmp read string I can get the router interfaces type, but is there a way to get
General Interface Feedback AppManager
Hi there I downloaded AppManager the other day to monitor a few URLs. I want to mention that our enterprise purchased an unlimited license of OpManager, based on my recommendation. I tested a lot of management softwares, including spending a couple months with a particular system management software, that we had already had a vested interest in. OpManager was the most intuitive, I had servers monitored and notifications set up within 30 minutes, as well as being able to invite the rest of my team
Next Page