virtual host apache setup in webNMS and getting NMSAuthManager failure
Hi, can you please help me with the following problem ... i have 2 problems . 1. i get NMSAuthManger process fails on start-up - where can I look to diagnose the problem. 2. I want to setup webnms using virtualhossts for apache so that i can install two different levels of security tls v1.1 and ssl 3. when i do the config changes in httpd.conf by adding the directives : <VirtualHost ipOfMachine:9091> ServerAdmin root@localhost DocumentRoot "WEBNMS_ROOT_DIR" ServerName APACHE_SERVER_NAME ErrorLog
include backup of system state with de duplication technology
one of the suggestion is that include the system state backup of each PC with deduplicaiton technology on scheduled basis. let the agent do this part. in case of some system error admin can restore to different system state. in case of disaster recovery they can use this system state from fresh installation
I need to capture a server image before it boots for the first time. HOw can I use the PXE server to accomplish this?
I am doing a job for the Department of Homeland security and need to make images of a server as it is hardened so that the powers that be can see what was done and when. This image will then be applied to multiple servers in two data centers. The first image to be made is the fresh out of the box, then I will capture images as it is hardened.
Automate or schedule a create online MASTER IMAGE from command line?
I would like to setup a scheduled task to create a master image of multiple servers on a regular basis. Is this possible from the command line? If so, how? and if not, could we look into putting in the next update?
Windows 8 support
When will OS Deployer be supporting windows 8 and 8.1?
Deploy to batch of computers problem
I bought 300 OS deployment licenses that I want to use over 3 year. I created a deployment task with name pattern and auto start when 1 computer is ready. The task stops running after successful deployment and the computer has the correct name. Now the problem is that when I start the task again for a new computer the name pattern starts back at the begin. It needs to go up sequentially. How to achieve this?
OS Deployer 4 - Deploy Successful But Will Not Boot
I am currently having an issue in deploying an image to a computer. We have deployed several images already with success. But the problem happens now that when we deploy an image, it "succeeds" but then we boot the computer and it doesn't go past the splash screen and reboots. We tried to fix this by taking another master image from a different pc and it seemed to work for one additional computer but now it is not work either and exhibiting the same issue as before. Creating another template does
pxe no boot filename received error
Hi, I just recently installed OS Deployer to give it a whirl, and I've run into a bit of a problem. Everything is working fine until I try to boot into the OS Deployer Agent via PXE. I get the error message "No Boot Filename Received" and the target computer ends up booting into windows. Anybody have any experience/insight on this?
Machine name and Domain not being applied to deployed image
We are currently using OS Deployer 4 (4.0.2.124) and have never been able to get on the features working correctly. On booting a machine onto the PXE server, the agent is loaded onto the target machine. We are then setting the machine name and domain name (See below) for the individual machine. (see below example machine name) The issue we are having is on restarting and configuring Windows 7, the machine name is not applied, nor is it being joined to the domain as requested. This involves additional
Deploying an Image from a USB Drive
Hi, we are trying to use OS Deployer to image some new laptops that don't have any onboard ethernet. We want to try and avoid using a USB to ethernet dongle or trying to deploy over the WiFi connection. Our thought was to install PE components on an external USB drive along with the deployment image, then boot off the USB drive and run installation from there. Is this type of deployment possible?
PXE Boot No configuration file present.
When i try to PXE boot clients into OS deploy, the Manage Engine Loader starts it indicates its downloading bootwiz.cfg. Then It indicates No configuration file present. Ive uploaded components and PE image. Option66 and 67 are configured. I need some assistance,\ Dave
PXE-No Configuration file present
Hello, I am trying to use the PXE server on ME OS Deploy. When I boot a machine up to NIC, I get starting Manage Engine Loader-Downloading Bootwiz.cfg Then i get Acronis Loader: No configuration file present. I have uploaded the configuration components, created a PE boot environment and uploaded that as well. Option 66 and 67 have been configured. No other PXE exist on the network. CAn someone pls help me resolve this error. Thanks Dave.
Remote os deployment
Hi, I am trialing OSDeployer 4 and trying to setup pxe boot so a deployment can be made from the deployment server to a remote machine. I have configured the pxe client to auto start os bootup after 10 seconds, when I try to remote deploy an os to this machine, which is turned off, the machine starts correctly but it always boots into the os and does not perform a new deployment. Can you please shed some light on this for me. Thanks. Geoff.
No Config File PXE
Machines are not finding configuration file, when i try to use PXE. I have configured option 66 and 67. No other PXE is installed. Components have been uploaded. PE image created and uploaded. Machines will say they are downloading bootwiz.cfg but then indicate that no config file was found.
Auto Start To Opreating System Doesn't work
Hey When We are running your 30 days free trial of your OS Deployer Tool 5. And sets that i should go into Windows after 10 sec in the pxe boot menu. it just wont Work. we have waited up to a minute and nothing happens, now we are not sure if it Works at all? anything you can tell us about it? is it the trial version or what?
Problem using Unversal Deploy
Trying to image a Lenovo 440P with a 440S image pointing to the 440P drivers. The image deployed and I saw the screen where it said that it was copying the drivers down. Upon reboot the system blue screens, and will not boot up.
Deply By Psexec 1620 error
Hi iam trying to deploy ManageEngineAssetExplorerAgent.msi then i get this below error T h i s i n s t a l l a t i o n p a c k a g e c o u l d n o t b e o p e n e d . C o n t a c t t h e a p p l i c a t i o n v e n d o r t o v e r i f y t h a t t h i s i s a v a l i d W i n d o w s I n s t a l l e r p a c k a g e . msiexec exited on 10.***.***.*** with error code 1620. Please assist
OS Deployer 4 - Scheduling Failure
Receiving the following error: "E00090002: Failed to add the scheduled task. An unknown error has occurred. Please reinstall ManageEngine OS Deployer 4 Management Console." Result in Event Viewer: "Scheduler failed to run task with GUID "changes every event created" because of error 2 (Failed to find the file (folder) or the key (value) in the registry.)." Imaged a number of machines on the 19th March 2014 with no errors showing. No changes were made to the system over night. First log
OS Deployer Booting to USB drive
Is there a way to get OSdeployer to boot to a USB drive instead of CD rom? also where can I find the BOOT.sys files
Connection to PXE ser has failed
When I try to deploy to a machine that is connected to OS Deployer console I get "Error code: 0x230011 $modeule = "patcher_remote_vs_3117 Tag: 09x1B14BB824510300. Can someone help me with this.?
Considering OS Deployer 5
We're considering OS Deployer, but need to know? 1) Is there support for Windows 10 2) It looks like OS Deployer is leveraging Acronis's Snap Deploy technology? If so, what makes OS Deployer better than the native tool?
HP Thin Clients
Hello We have a large number of HP Thin clients running XP embedded and Windows 7 embedded. These act just like a normal Windows machine but on limited hardware. Would OS deployer support imaging to thin clients?
Move License to anothere PC
In case a computer is loss, damaged, stolen, or decommissioned, will I be able to transfer a machine license to another machine?
Unable to deploy image
Receiving below message in error logs: Host '192.168.1.203' has failed the deployment. Additional info: -------------------- Error code: 1 Module: 52 LineInfo: 6934824D6BD2F69E Fields: $module : "osd_server_vs_3117" Message: Host '192.168.1.203' has failed the deployment. -------------------- Error code: 15 Module: 51 LineInfo: E3394061D0E3A4BA Fields: $module : "osd_server_vs_3117" Message: Failed to assign volume '0'. -------------------- Error code: 8 Module: 7 LineInfo: 7937E52EAD24372E Fields:
ManageEngine OS Deployer 3 Released
Dear All, We are pleased to announce the general availability of ManageEngine OS Deployer 3, the OS and Disk Imaging and Deployment Software. OS Deployer is a comprehensive OS deployment solution that enables organizations to capture an image of OS and applications that can be deployed to laptops and desktops rapidly and easily. Salient Features Centralized Disk Image Capturing Role-Based Templates for Easy Deployment Flexible OS Deployment Options Post-Deployment Customization of the OS and Applications
Pricing
Hi, I have had a look at your web site regarding this software and I can not seem to find pricing for it, either on the .com or .co.uk website. I also looked at Network Unlimited web site and no pricing or even a mention of the software. Thanks, Billy.
Wishes from ManageEngine OS Deployer.
Hi Folks, Christmas wishes to all. Merry Christmas and Happy Holidays. Thanks and regards, **************************************** J Dinesh Babu Sr. Technical Consultant Windows Desktop Management Solutions Tel : +1 925 965 6478 Email : osdeployer-support@manageengine.com http://www.osdeployer.com ****************************************
Wishes from OS Deployer Team
Hi Folks, OS Deployer wishes everyone a Happy New Year 2010. Regards, ****************************************** R. Romanus Prabhu Lead Technical Consultant Windows Desktop Management Solutions Tel : +1 925 965 6478 Email : http://www.osdeployer.com ******************************************
Can anyone show one example of using OS deployer deploy one OS to a non-OS installed computer?
One example with detailed operations, contain image creating, PXE server installing, to be deployed computer's BIOS settings, deploying process and so on.
OS Deployer now Supports Windows 7
We are pleased to announce the latest update to ManageEngine OS Deployer. The latest update extends support for deploying Windows 7 Operating System. The OS Deployer Management Console can also be insatlled on a Windows 7 platform. The latest update Build # 3407 can be downloaded from our website . To update to the latest build, download the latest EXE and run the installation; it automatically upgrades your current installation to the latest version.
OS Deployer Agent Hangs
Currently I'm using OS Deployer Console from Windows 7. I have captured an image of the disk using the PXE Master Image Creator and saved it to my local C: drive. I then PXE boot another computer to load the Deplyer Agent and it successfully connects to the Management Console. I create a template with all my settings and tell it to proceed. It shows the deployment in the console window, shows the current progress at 1% and total progress at 7%. However it doesn't seem to get past this stage. It's
Anyone Using This Product?
Does anyone use this product? If so, how do you like it? I was surprised that there wasn't much activity here.
USB versus Network Agent Deployment
On a standard 100Mbps lan the network deployments using the OS Deployment Agent obviously take quite some time. Without a gig link, or a fibre channel hba you're stuck sitting for usually days. So I was wondering how much faster deployments are using the standalone method? For instance using a usb 2.0 external hard drive?
computer not found
Please help regarding this error, each time i try to connect with a computer on the same network the error occurs like E000807d5 "Computer not found". please reply regards saeed Ahmed
Installation of OS deployer
Dear All, I am a new User of OS Deployer, but i don't know how to install this application and how to capture the image of workstation and laptops, what is workstation system requirement which component need to install on client side could any one send me the administration guide of brief me how i do start the work with OS deployer. thanks Saeed Ahmed
Deploying is successful, Except It's not
After creating an image and booting via the standalone utility flash drive, I started a standalone deployment. About 3 seconds after I hit "proceed" I get a message saying "Deploying is successful" except when I reboot I realize my box has been bricked. There's also a slight blip on the screen when I click "Okay" on that rather misleading success message that allows me to see what looks like more than a few errors. I've gone the distance on this one reading the documentation and trying this product
error code 0x340001
error code 0x340001
Deploying Multiple Machines with Same Image
Having issues when I am deploying same image to multiple same type computers at the same time. Only 1 or 2 at the most succeed, the rest fail saying 'failed to deploy image' followed by 'image corrupted'. Does anyone have any ideas why this may be happening. I know the image is good it just seems to not want to deploy to multiple machines at the same time with no rhyme or reason. Thanks in advance, Matthew
Boot from network and image starts loading but reboots immedietaly
i am booting from the network fine and go into the agent fine. I am trying it manually first to get it working but when the deployment starts, it causes the client to reboot everytime. I ran a check on the image and it was good. Suggestions?
Deployed Image failed to boot.
Hi, Need some help please. I've created an image fine and deployment seems to be working, well on the server i can see the deployment take place and see the image get to 100%. The pc then reboots and attempts to boot off the hard drive and comes up with the following message bootmgr is missing. Now normally I would just run a startup repair which would fix it, but in this instance its from a fresh deployed working image so shouldnt really need to. Now just to make sure, i have recreated the template
Next Page