What is the big benefit from using Agents
dear sir How are you? I would like to ask about Monitoring Servers using Agents under Monitoring in admin page, What information i will get from using this agents? And what if i plan to not using it and just use SNMP or WMI credential, do i loss many data from servers? Is there any traffic or loading on CPU & RAM when using Agents in servers? Can i monitoring my servers only using Agents without using WMI & SNMP credential ? thanks
Port Mapper
Hi Can I put a threshold limit for Port on a switch . if I am using port mapper . If one of the switch crosses the threshold can it generate a notification .
Cannot perform first login OpManager 11.2
Hi: I just downloaded OpManager 11.2 and installed it under Ubuntu 14.04 Desktop. I didn't install any other components. The ping requirement were met and it appears as though XFree86 is installed. The installation seems to have gone well but I cannot login through a web browser. It is stuck at the License Activation Details page. The browser is stuck in a waiting, loading from... loop. If I view the page source there is this snippet: Your current license allows only <B> 1 </B> users but you
Connections Port
Hi Is there any way to monitor the total number of connections on a port? Regards,
Issue after upgrade OPManager build 11300
Hello, I upgraded my OPManager server with the latest build then I got the following issue: All WMI performance monitors stopped to work. I checked domain account and password, ok I switched to SNMP performance monitors, it is working. I removed WMI monitors and readded them with no good results, not working. I reapplied via templates but no way, it doesn't work. Can you help me to resolve this issue? Many thanks Philippe
OpUtils Addin for OpManager Does Not Use Proper Community Name When Scanning
I have OpUtils addin as part of my OpManager. I'm at v11300 for OpManager, and IPAM andSPM Plugin v6. I have OpManger monitoring switches with no problem. OpUtils displays switch information and appears to operate. However, If I scan the switch, it fails and I receive "Switch is down - No response to SNMP queries". I can ping the switch. When I attempt a SNMP Ping, it fails. However, if I re-enter the community name to on the SNMP Ping screen, it successfully pings. It appears that OpUtils is not
Users
Hi How can I verify the changes made by users in opmanager? Regards,
how to write a custom windows script for OpManager
Where can I find examples of how to write custom Windows scripts and use them inside OPManager ? OPManager version = 11 Thanks,
How to monitor Active Connection Count of device run Linux server.
Hi everyone ! I used opManager was monitor devices in company .I has device run Linux server with service nginx. I want to monitor Active Connection Count of device run Linux server this . So, Can you help me . Thanks :)
VMWare Server Stats not showing after roll back to 10.2
We recently rolled back to 10.2 after an issue upgrading to 11.2 . The last outstanding issue I am unable to resolve is our VMWare servers are no longer statistical data for anything. It does show availability and does show all Inventory details. Also when trying to rediscover the device it display "Error!" Is there a fix for this? Please let me know what additional information you need. VMWare versions 5.1.0 and 5.5
"Hardware health" monitoring is unreliable
I have a Cisco 2821 router, which is reporting a fan failure on Fan #1. OpManager is showing all fans as healthy. The router is reporting this: 149397: Jun 6 09:38:01.041 EDT: %ENVMON-3-FAN_FAILED: Fan 1 not rotating Obviously I can't trust OpManager to report hardware health and I'm going to need to manually check all my equipment now. This is the page for that router:
Device not monitored
Hi all, I have just recently installed OpManager 11 (previosuly I had a working OpManager v9, but I did a complete new install without migration). I want to monitor a remote AIX computer over which I have little control. I can use SSH to connect the that server, so I configured OpManager to use CLI monitoring. As soon as I start OpManager, it seems to correctly fetch the values for disk utilization, memory utilization and cpu utilization, but shortly after I get a red warning in the summary page
Problem URL monitor
Hi. We're receiving alarms indicating that the URL is down because the host is unreachable. the error i receive is: 404: The server has not found anything matching the Request-URI. : However, when entering the URL in a browser, i'm able to connect to the site and i can even click on the URL link in OpManager and open the site. What is the cause of this error? Any solution?
Connection loss causes device to be "unmanaged" status.
I have an issue where when a device loses connection, it goes into "unmanaged" state. But when connection is restored, I have to manually go to the devices's page and select "Manage" again. Well this is kind of a headache when monitoring devices spread out across the country over some very unreliable connections ranging from DSL to satellite. We expect these devices to have some connectivity downtime, so monitoring the amount of time is what is more critical. While the above problem is a pain, the
Problem running powershell commands in script monitor in OM 11200
I would like to schedule a Test-MAPIConnectivity script on one of our Exchange servers but am having problems setting it up as a script monitoring template. I have found the script body that I think will work but when testing it I get the following: "The term 'Test-MapiConnectivity' is not recognized as the name of a cmdlet, fun ction, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again." Is there a way of installing
Monitoring additional SQL instances
I have an issue when I create a new SQL instance, on a server that already has one (or more) installed. We have a rule which associates MSSQL monitors when it finds sqlservr.exe running. This works, and we get the MSSQL Dashboard View and MSSQL monitors. The problem comes when we install another instance later - no matter how many times we re-run the rule, it will not associate the new instance with the monitors. However if we delete the monitoring for all existing SQL instances, then run the rule,
connected clients in pico station M2
Hi every body i cant see connected clients to my pico station m2, I have installed opmanager recently and I have no idea what should I do, can some one guide me?
Cannot login first run Opmanager 11.3
Downloaded OpManager 11.3 free edition and installed it fresh under Windows Server 2012R2 using PGSQL. Installation gone well but I cannot login through a web browser ( IE or Chrome). The browser is stuck at the License Activation Details page in a waiting loading loop. Is anyone else experiencing this issue? Any help would be appreciated. Thanks,
auto apply notification profiles
Hi, just wondering if there is a way to auto apply notification profiles to newly discovered devices? thanks Russ
OpManager widget stops working
When I add the realtime bandwidth utilization widget to the home screen of OpManager, it works fine, but stops working after a few minutes. I've tried deleting it and re-adding but this doesn't help, it continues to stop after a few minutes of getting it added.
ChangeServerBindIP.sh does not work correctly
Hi: I read in a very old forum entry about how to force OpManager to bind to a specific IP for servers with multiple IPs. The old version of OpManager included Apache but the current version no longer works this way. Current version has a script named ChangeServerBindIP.sh in .../bin where I can pass the IP to make this change. My server hosting OpManager has 2 IPs and I want only one of the IPs to be bound to the service. I can run the program when OpManager is not running and conf/loginData.properties
Vcenter monitoring - New Storage Added, Monitoring is greyed out
New storage LUNS for our non-SSD disks have always automatically populated, for our VMware monitoring. We have added many new LUNS now that are listed as SSD disks. Information is not displaying, for any of the performance monitors usually collected, nor is there information listed about disk capacity size etc. I've ensured that my opmanager user has access to http://vcenter/MOB (read only).. But I'm not coming up with the help files I need to work through this issue. I've set up a test installation,
End of support for OpManager version 9.x
Dear Users, With the release of version 11.3, we are announcing End Of Support for the old version version 9.x. The details of this announcement can be seen here. http://www.manageengine.com/network-monitoring/eol.html Still 3 months left for the users in version 9.x to upgrade to latest version. If the AMS is not active, renew it and plan for an upgrade as soon as possible. Gabriel Team OpManager Network Monitoring Software
Start program on server boot
Greetings, Is there any way to start a program (for example notepad) when a monitored server reboots? Also, for the Consecutive Times value under Device threshold setting, if I set it to 2: Does it mean it will consider two consecutive times as follows: violate threshold > alarm cleared > violate threshold again OR Violate threshold > Violation value increases (without being cleared) Kind regards, Niko
I have Opmanager running V 9410 32bit and want to go to 11300 64bit
How do I go about upgrading OpManager build# 9410 32bit to version 11300 64bit? It is running on a windows 2003 sp2 VM. Any help/procedure would be appreciated. Mark
MS SQL 2008 on vmware virtual server
OpManager - Essential Build: 11100 I have a virtual machine running 2008 R2 operating system and a MS SQL 2008 instance installed. The virtual server had a problem and i had to delete and re-add back in to OpManager. OpManager has detected there is a SQL instance running but i'm getting no stats on it, all other stats for the virtual server are working correctly. OpManager has correctly detected the instance name. Where the stats should be i have "No database associated. Click Here to associate the
MSSQL Monitors
Hello. How can I set MSSQL Monitors template, that when I add new device, there will appears only my counters, but not default?
URL monitor
As a User without admin privilege can view monitor URL?
Cannot change ipaddress of a discovered system. IP not correct
Hello Forum, I am writing this because of an issue I'm having where a discovered system has an improper IPA. I've tried to edit it and change the ip, but it will not let me and always reverts back to the incorrect ip. Anyone familiar with this condition? Mark
Problem to authenticate
Hello! Yesterday, in my enterprise core, we suffered a power outage. Unfortunately, our OpManager can't permit to logon anymore. Moreover, the option to use the authentation in Active Directory is no longer available. I think that the database is corrupted. How we can solve this problem? Are there any file .bak or a command to resolve this case? Best regards, Willian Machado
Errors backuping Netflow & NCM Plugins
Hello I have OpManager Essential build 11300 Netflow Plugin build 9870 NCM Plugin build 5970 Database: MS SQL Server 2008 The Backup utility from OpManager can not backup the databases of Netflow and deviceexpert. The backup log shows ... [05-28-2014]|[08:43:28:714]|[INFO] : Please wait ! Backup DB started ..... [05-28-2014]|[08:43:41:098]|[INFO] : Please wait ! Netflow plug-in DB backup in progress ....... [05-28-2014]|[08:43:41:105]|[FINE] : Netflow backup execution command output : {output='Mysql_Mssql_BackUpConfig.bat'
Problem removing device
When trying to remove a device, I get the message: "unable to find the object x.x.x.x". But it still shows up in the Overview. Any ideas?
Adding HP layer3 switch to oputils
When adding the details for a hp procurve switch User Name : Password * : Prompt * : Enable UserName * : Enable Password * : Enable Promptusername i presume is operator enable username is manager what should go in the prompt field?
Migrating from versions bbdd
Hello Someone has steps or how to migrate from: In old server OpManager-11100 x32 Plugin Netflow-9700 x32 with MYSQL new server OpManager-11100 x64 Plugin Netflow-9870 x64 with POSTGRES thank you very much
BackupDB.bat - Error writing data to file
Hi, I am using version 11 of Opmanager. On trying to take a backup of my opm, I am getting the below error message. Please help. [05-16-2014]|[20:13:07:765]|[INFO] : Please wait ! Backup DB started ..... [05-16-2014]|[20:13:08:091]|[SEVERE] : jdbc.BackupException: Error writing data to file. at jdbc.BackupDB.dumpDataToFile(BackupDB.java:157) at jdbc.AbstractBackupDB.backupDB(AbstractBackupDB.java:80) at jdbc.AbstractBackupDB.doBackup(AbstractBackupDB.java:438) at jdbc.BackUpImpl.backupDB(BackUpImpl.java:72)
device template changes not applying
Using OpManager 10.2, i've gone into Admin, device templates and changed a templates CPU and Memory Utilization performance monitors from WMI to SNMP, clicked apply, selected a server to update, it tells me the update was successful but when i check the server the changes haven't updated. I've also tried the 'apply and overwrite' option and no change. Any feedback would be much appreciated, thanks.
Need template for Sidewinder 2150F
Howdy Does anyone have Sidewinder template to monitor CPU utilization and Memory ? Regards
OpManager Interface performance data storage
Hello. In which database table is the interfaces (traffic, errors, etc.) performance data stored. I looked at the statsdata table for a specific date but was unable to find the data there. Thanks a lot in advance O. Díaz
Disable notifications of Performance Monitor during daily scheduled window
I am wondering how we could prevent Email/SMS notifications of a specific performance monitor (ex. CPU Utilization) during a set range of hours every day. In our environment we encounter heavy CPU Utilization between 7pm - 1am every night. I do NOT want to receive notifications during this time since the high CPU Utilization is expected behavior during this time range. Is this possible, and how would we set this up?
Unable to get data out of fortigate firewall
Hi , can any one help me with adding fortigate in to the Op Manager, I have already uploded the 2 MIB files from for the Fotigate series and also the INET mib file. But the OpManager just displays availability and the response time. Any help is highly appreciated. Regards, Fataz
Next Page