Monitor Linux VM Disk Space
We have a Linux machine that is currently being used as a mount point for another server. This server does nightly backups of our ERP system, and I was wondering if it was possible to set up a monitor via SNMP to monitor the available free space on the machine and make sure it doesn't get too small. Currently, we're running it Hyper-v on Server 2012 R2. The Linux VM itself is Red Hat 6.6. Whenever I try and add a performance monitor, however, I get the below message. Please check whether the device
OPManager Graphs data issue.
Dears I have a problem with graph data, when i am asking for a traffic report within 30 days, i got my needed data correctly as showing in the first photo below. The problem happened when i am generating a report for more than 30 days, i got a wrong data especially 95% value as showing in the second photo below. i need your kind help on this issue. Thanks.
WIRELESS SOLECTEK_SKYWAY 7000 - DEVICE TEMPLATES
Dear Sirs. we have about 15 wireless link implemented with radio manufacturer by SOLECTEK model: SKYWAY 7000. We are using OPManager version 10.0 and at device templates we can not find the manufacturer: SOLECTEK neither model SKYWAY 7000. can somebody tell us if at present there is a device template for this wireless equipment and if you can send them to us, please?. attentively.
Problem OP with SD plus MSP
Hello team I have a problem with using Op manager 11400 with sd plus msp 8306, Integrate OpManager with ServiceDesk Plus get this error Unable to connect SDP. Error message from SDP : No such user is available in specified DOMAIN what is the problem ? thank a lot
Windows Server 2012 - Page File Usage - SNMP
Hello everyone I've been attempting to read the Page File Usage using SNMP within OpManager with no success so far. None of the OID's within the default MiB's seem to correspond to the Page File usage. I've unsuccessfully tried using the Hostmib.mib generated by the server and had the same issue. I've tried using a few OID's I've found within different support threads but also no luck with those. Any ideas other than resorting to WMI or using scripts to do the same job? (Kind of want to leave those
"Error # The RPC server is unavailable." when adding windows services monitor
I get this error "Error # The RPC server is unavailable." when trying to add windows services monitors. I am only having this problem with one server, and I don't have an issue when testing credentials. I also did not have an issue adding a process monitor for this server.
External snmp sensor (probe)
Hi, is there a step by step guide on how to install / configure external snmp probes to OpManager ? I am trying to setup ServersCheck SensorGateway, which I have the mib file for. I am expecting to see charts as well as values.
Netflow plugin cannot upgrade to new version
Hi, I have opmanager plus the netflow plugin installed. I have a problem when tried to upgrade Netflow Plugin into new version. when I used updatemanager.bat, found error message : "Could not find the main class: com.adventnet.tools.update.installer.UpdateManager. Program will exit." Detail version : 1. Opmanager version 11500 2. Netflow Plugin version 9861 How do I fix this problem. Can anyone help me. regards,
OpManager - SuperMicro - Netscaler
I have a Netscaler 8005 MPX, which is a Super Micro re-branded box. Configuring the LOM snmp and traps to send to OpManager. I have also installed the SMT MIB from SuperMicro. I can't see anything from the device in OpManager (SNMP doesn't appear to be working). I also can't receive traps. I can receive traps to the SuperMicro IPMI view tool. But when I point it at OpManager the traps aren't received. I also configured the IPMI address on the device in OpManager. I also can't walk the device
Can't start OpManager on web browser.
Hi everyone. I can't start opManager when using on web but when i check service in windows this opManager STARTED. So, can you help me fix this ? and if don't fix this, hope can you guide me backup data config opmange do then i can install it and can restort config. Thank and best ragards ! This is infor in log fie name startout.log Thu Aug 27 10:03:13 ICT 2015 : Useage : java ProductStarter <Process name> <relative path of conf file from 'product.home' system property> Thu Aug 27 10:03:13 ICT 2015
Plugin: Network Configure Management can't detect device in OpManager Database. Error when use SSH backup configure
Dear Support, Now my system have some issue, please show me way to fit it 1) IP addresses of devices can’t be detected in NCM plug-in, even though those devices are added and defined in OpManager. ( Device : Cisco ASA5520, HP Switch) 2) I use Telnet to backup Cisco devices successfully, but there is an error when I use SSH to backup HP devices. Moreover, my group wants to move all protocols to SSH for backup process. Can you let us know meet ability of this requirement? ( Device :
API Client on 11600
Anyone else lost the API client after upgrading to 11600? I just get a screen with a plant on it with OpManager text in the middle.
Manually restart windows service remotely
Hi All, Brief description of my problem: I have a third party application installed on a remote client network. This application stops responding sometimes, to fix it i need to restart a windows service. Please note that the application is down here and the service will still be in "Running" status. Currently, there are options in OpManager to restart the service or server as an action when the service stops responding. So can i manually restart windows service? Or can OpManager restart window service
UCS devices
Hi, i install Opmanager and add my devices. now opmanager show "Your current license does not allow to monitor UCS devices.You can either remove the UCS devices you do not want to monitor here, or procure a new license.Remaining devices will be deleted" but i have no any UCS device! when i login , it show a page with License Activation Details title, that allow remove UCS device, but no device is available!!!. what is the problem?
Please share with me RICOH device Templates
Hi to all, some one know or already have some device templates for RICOH printers ?, I need URGENT help I don't find the way to do it , please help me ASAP. I will appreciate your help.
Custom script template with powershell and sqlplus
hi, Tried the following in the Powershell console and it works: $sqlQuery = get-content "D:\Scripts\sqlquery.txt"; $tnsalias = "tnsalias"; $username = "username"; $password = "password"; $sqlOutput = $sqlQuery | sqlplus -silent $username/$password@$tnsalias; Tried the same with Opmanager and failed: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd"> <properties> <entry key="thresholdEnabled">false</entry> <entry key="executeFrom">0</entry>
Last polled value of a performance monitor "No data available"
Hi, i am new using opmanager, i'm trying to monitor a few devices using SNMP. The problem is, when in the dashboard i add the last polled value of a performance monitor widget sometimes it displays the correct value, however most of the time shows "No data available". I would appreciate if someone can help me.
Disk monitoring based on % free and size
Hi, We have over 300 windows servers (each with multiple disks) and would like to set notification thresholds based of the percentage of free disk space available (say 10%). If the disk is large (2TB) then the percentage needs to be adjusted to 5%. How can this be achieved in OpManager? Thanks John
Service Monitors
how can I add a service to opmanager that runs on a random port not a particular port like DNS or MSSQL since the option to add service monitors requires a particular port. Service Name Port number Timeout (secs) Generate Alarm if unavailable for consecutive time(s) Scan during Discovery ?
Problems with java.exe
Hi, we have the following error message in the logs on our DC: User Name *********** Client IP Address 192.168.**.** Client Host Name srv-opm.***.******* Domain Controller SRV-****.****.***** Logon Time 11-Jun-2015 15:53:26 CEST Event Type Failure Failure Reason Bad password Logon Service krbtgt/***.****** Record number 159534680 Failure Code 0x18 Event Code 16 Event Number 4771 SID %{S-1-5-21-476138262-1171983993-4202591527-500} Remarks Kerberos pre-authentication failed.
XenServer 6.5 and Opmanager
Has anyone had any luck monitoring XenServer 6.5? I've tried setting it up and I'm not having much luck. It is being discovered as vendor type: net-snmp and the only data it is pulling is the system description. It's not reporting Memory, CPU and etc.
Sorting incorrectly?
In the widget "Interfaces by Bandwidth Utilization," the Receive and Transmit columns appear to sort incorrectly, as if it was by text rather than number. For example, if one sorts in descending order, 9.9 comes up higher than 80.54 when it should be the other way around.
reassociate probe to opcentral
in the long sage of trying to get ssl running and communications to the probs working I removed one of the probes from opcentral Is there a way to get it back without uninstalling and reinstalling? The probe is still up and running and collecting data I just to get it back into central I saw on another thread that it was possible in IT360 and I am hoping there is a similar procedure for OpManager Central John
URL monitor emails
It seems that URL monitoring emails no longer work. Opman sees that the service is down but never sends out an email advising us so. Anyone at Build 11500 having the same issue?
HTML option for scheduled reports
I've already made this a feature suggestion through the appropriate support channels, but here it is again to see if enough people can vote on it to make it a serious candidate for a future release. HTML option for Scheduled Reports!!!!!!!! Lets say a company has IT staff who travel and roam internationally. It is very frustrating to get an email on their device that requires them to download a PDF just to view the contents of a scheduled report from OpManager. When you create reports they can
Reports (under a device) missing
In OpManager Version 10, I used to be able to run "Reports -> report at a glance" from within a managed device. I cannot find this in Version 11, does it not exist anymore? Regards -Gary
Kentix AlarmManager - Device Template
You can download the XML File and integrate easy the Kentix AlarmManager device into OpManager
Getting Event ID 0 PostgreSQL error on OpManager Server
Our OpManager Server database is crashing multiple times throughout the week. I am noticing the following error in our Eventlog: Log Name: Application Source: PostgreSQL EventID: 0 Description: The description for Event ID 0 from source PostgreSQL cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display
Python script
Hi, I have script that work well with Nagios in my SUSE sles 11 machine. How can i use the same script and add in Opmanager -script monitor template? Below are the script that i need to put in Opmanager. Thanks #!/bin/bash if [ $# != 2 ]; then echo "Bad number of parameters. Provide warning limit and critical limit" exit 3 fi ntpfile='/etc/init.d/ntp' if [ ! -f $ntpfile ]; then echo "ntp daemon not found" exit 3 fi offset=`/etc/init.d/ntp status | awk ' { print $9} ' | sed -n 3p` if [
Can't restore file config .
Hi everyone. I was backup data file config of opManager by https://www.manageengine.com/network-monitoring/help/userguide/backup_restore.html I copy folder backup in C:\<OpManager Home>\bin\backup After i was arhive it file ZIP by name backup2808.zip and install new opManager. After new opManager, I was command line using CMD by admin C:\<OpManager Home>\bin\backup>RestoreDB.bat backup2808.zip and have log ************** Restore operation started ********************** Restore started
Esx's not classified as "ESX servers" once deleted and re-discovered in Verion 11.6
Hi We are testing version 11.6 (still running in // version 11.4), for that I've added one of our vcenter 5.5. After like 15min, we were able to see all the vm's & the 2 esx's, everything were classified in the "virtual" tab as expected. - Problem is when i delete the 2 esx's, then a force to re-discover via the vCenter, they re-appear couple minutes later but they never came back as ESX server in the "virtual" tab !! - Same behavior with the Vcenter, if you delete it, and re-add it : vm will come
New Virtual Machine Mgmt for ESX in v11
Few questions (v11600): Background: We upgraded from v11600 from v10xxx and it initially seemed everything migrated over, however, the VM's were not showing up under Virtual or Server menus sections, only under Inventory | All Devices. ESX and VCenter the same. Removing ESX and VCenter and re-adding changed nothing. Support stated we needed to remove everything and then re-add just the VCenter to let the discovery. This worked ONLY after adding VCenter via the Settings | Add VCenter option...
VMWare Monitoring problem with VM and multiple network card
Hi, we're testing opmanager with vmware plugin and we seems to have problems when the VM has multiple network interface. Just an example: We have a win2008 machine with 2 network interfaces, one on the public network and one in a private storage network not routed outside of the storage switches. When we discovered the host we saw that opmanager discovered the VM with the "private" ip address as the main address and as the hostname too (this address is not in the dns reverse lookup). The WMI monitor
Opmanager 9 > URL Monitor : Host Unavailable
Hi Everyone, I have a problem about URL monitor. I added URL WebSharePoint (intranet) for monitor ULR Web Site but i found the error : The URL http://xxxx.co.th is Down, Reason : Host Unavailable . and i tried search on ManageEngine Community but solution can't work for me. please kindly suggest methods for solve this problem. Regards, Aehbudjet
URL for SharePoint on 11.6
Hi, I have upgrade my OP-Manager installation to 11.6 during last weekend and since then all monitored URLs of SharePoint or websites using NTLM authentication are failing. You can see attached the URL monitor, the response if i click "Test URL" is "Host Unavailable" but if click the URL another page opens with the correct content. I have re-applied the fix copying "cryptix-jce-provider.jar" from "cryptix-jce-20050328-snap" into OpManager\classes folder and restart the service a few times with no
Change default FQDN for central server on probe
Hi How do you change the default generated FQDN for new probes ? At present a typo in the original setup means I have to manually change the NOCSeverDetails.xml file at the probe to allow connection to the central server as the default generated FQDN is incorrect Cheers Gaz
Device Details of a Vcenter
Another annoying "problems" - The device details of a discovered Vcenter shows unknown for type & vendor ! - red message "unable to show login parameters as device type is unknown" when clicking on password on "device details" ; and no possibility to add SNMP credential on a Vcenter.... - esx's are not listed according to their names for example when clicking "virtual" -> "esx server" , looks like they are showd in a random manner....not very convenient ! Regards Thierry
Error in License after upgrade
Hi, I tried upgrading my opmanager to the 11500 version but an error occurred ( OpManager finished suddenly ). I had to reinstall OpManager . And after doing, he did not accept my license . How can I fix it? Regards, Bruno Lorensi
OPM API problem
Hi, when i try to create notification profile on OPM (Log a Ticket to SDP), i stuck in this problem. Pls help me how to fix this bug. Thanks you!
Cache Monitors on SQL server
Using opmanager I am able to query all DB parameters, but below two monitors are not at all collecting data. - Cache Hit Ratio - Cache Hit Ratio(SQL 2005 Server) Test monitor shows the error as "The Monitor did not respond to the test request" No Clue on what might be wrong here; I am not suspecting WMI services as remaining monitors on the same server are polling data fine.
Next Page