SNMP and Syslog.
I have a server that works with SNMPv3 requests, but not traps. It also will not process syslog messages for EventLog Analyzer. I can set that both types of messages are getting to the server. Any ideas what could be happening? Thank you.
Trouble message: Threshold exceeded
I have created monitors templates via apiClient and that process use this method "addDeviceTemplate " in the form i fill information about trouble message , the problem i am having is that later in some monitors of the device i got this as trouble message "Threshold exceeded" and some alarms just say "Threshold exceeded: ", of course i can update the device monitor one by one, but why te value of the trouble message configured in the template has changed?. addDeviceTemplate - Example of values
Category for FortiWAN of Fortinet
Hi supporter, We have 5 FortiWAN 200B, i created device template for FortiWAN and choose category is LoadBalancer but Opmanager not get HostName (only show IP) and Interfaces not show IP address of interfaces. Screenshoot as below Please support me. Thanks.
Several Issues
Hi everyone, I've used OpManager for close to 10 years and I love it. I'm now on version 11.6. I don't like the new interface, so I'm using the "old" theme. However, we have a lot of virtual machines using HyperV, and I notice it uses the new interface for that. I guess I'll just have to get used to it. That being said, I've found a couple of issues with the "old" themes. I can't delete certain monitors like Active Directory, SQL, etc. Unless I'm blind, there is no delete button. I can't edit the
Disable Unlicensed Features
As I could understand that this maybe a method for Manage Engine to promote its rich features but in the end there are too many tabs that are not being used. Its like using a free software with advertisement while most of us pay for its license. Tabs like Application Manger Plugins, Log Analytics, Rack View, CMDB and etc.... Soon OpStor I would like to suggest a feature to disable/enable these tab on user preferences. By default it can be turn on to notify user but user could turn off these tab
pfx ssl on OpManager central and probes
Morning, I was having issues getting my wildcard cert installed on OpManager central and had to call in tech support to get it running properly. Unfortunately for me I wasn't watching close enough and I am having the same issue on the probes. After we got Central up and running the probes stopped communicating and we were told that the probes need to be on SSL as well. Probe Name MachineName Status Devices Interfaces Load (p/s) LastContactTime gwretail
Cisco ASA interface statistics period
Hi, I need to know for which period the interface statistics are collected. ASA has two interface statistics, for 1 minute and 5 minutes, but I cannot find which one is polled? Regards, Borut
Background Images for OpManager Are Too Large, Causing Poor RDP Performance
Hi, The background images for OpManager are too large, causing very poor performance over RDP. When accessing OpManager over a remote RDP session, it often hangs the browser for 30 seconds, while the background image is redrawing as it fades in. login_bg.jpg - 232kb noise-bg2.png - 1MB This makes it very difficult to use OpManager over a remote RDP connection. Needless to say, this is frustrating during an outage scenario.
Anyone using OpManager to monitor a Kemp Loadmaster 1500?
I'm not able to successfully configure this load balancer, even when using their own MIBs and have created a custom device template. More specifically, I'm not able to monitor the CPU and memory utilization; I am able to monitor its two network ports though, as well as their response time and packet loss. At its most basic, these load balancers are a Linux box designed to provide load balancing, but even when I use Linux as its device template, I'm still not able to monitor its CPU and memory. The
80 to 443 redirector
Afternoon Just finished installed a wildcard ssl onto the opmanager box and enabling port 443 Next question is how do I redirect 80 to 443 to people can go to http://opmanager.domain.com instead of remembering https://opmanager.domain.com (changed to port 443 so we didn't have to type out https://opmanager.domain.com:80) I've read thru a few tomcat procedures but they don't seem to work John
Problems
Working with opmanger 6 years, saw many problems. Now we are on version 11.5 and see problems again. Opmanager stops collecting randomly Qnap devices suddenly cannot connect to snmp/cli Templates still hard to make en always a lot of N/A, plugins not 100% usefull or to expensive for what they do. Are we the only one having problems?
Device Down: No response from device for last 5 polls - disable this alarm
Hi, How can I disable " Device Down: No response from device for last 5 polls" I need devices to be monitored, but I do not need information, if they are offline, for example desktop,printer during night. Notification profiles, makes no difference what I setup there, alarms escalation this same, removing network interfaces from monitored this same result. I need to see device green and get alarms when free space on disk is low, or network utilization is high and so on, but information about if
Delayed Trigger seems doesn't work
Hi, We have an issue about the delayed alerts; We would like to receive an e-mail alert only after 5 minutes. We configured a notification profile with Delayed Trigger and 'Do not trigger if alarm is acknowledged' check box enabled. It seems doesn’t work because OpManager sends an e-mail alert as soon as an critical event occurs. The our current OpManager version is 11600 and it runs on Windows Server 2012 R2 Datacenter (64bit). Could you help us, please? Let me know if you need further information.
Configuring Mail Server in Opmanager
Hi, I'm trying to configuring the mail server in Opmanager 11, but i receive the erro in below javax.net.ssl.SSLHandshakeException cannot be cast to javax.mail.MessagingException My mail server is a Exchange mail Server 2010 and my opmanager server it is inserted in list of a smtp relay. How configuring this feature in opmanager? Can someone help in this issue?
Couple of issues using opmanager
Hi there, I've been using opmanager for the past couple of days and I have some problems. 1. I've a domain controller on a virtual machine, every couple of hours it's category is changed to virtual machine and then the domain controller monitors are removed. I think this is synchronized with the rediscovery of vcenter. 2. I've added an snmp monitor for temperature sensor on APC ups I had queried the snmp oid and it work in MIB browser but I've to load certain a specific MIB library otherwise it will
reply to post notification?
Hi there, This is a question with regards to the OpManager forum itself. For some reason, I'm not notified when someone reply to a post I follow - I do have the option Notify me on response checked! What would be the email address used for this notification? I'll check if they got caught by our spam filter. Thanks.
Migrating Standalone OpManager Essentials 11.6 to Enterprise OpManager Probe 11.6
Hi, We have a standalone 11.6 Essential OpManager that has been running for some time. We have purchased an Enterprise license and we are deploying with in our environment with the plan to migrate the standalone version to a probe. I have studied the instructions in the wiki explaining how to perform this migration but I have some questions about the "MigrateToEnterprise.bat". I have built the new copy of the Standalone and restored the database as per the instructions. When running the Migrate
How to see graphs for monitoring scripts?
Hi guys, I'm trying to use the new interface, but there I can't see the monitoring scripts graphs in real time as I can for out-of-box performance scripts. I can select it and it only gives me the option of deleting it. How do I do that?
Physical and Virtual servers showing different interface
Since updating to OpManager ver 11600 the interface for Virtual servers has changed. It looks like it is using the new API even though I have set it to use the old version. Physical server are showing correct, using the old API version. Also, under the Visualization menu tab, all the options are missing apart from All Devices. I have done a fresh install on a test server and the results are the same on there. Have the visualization options etc been removed or am I missing something. Thanks, Paul.
No EsxServers showing
I have managed to conenct the Esx Vcenter to de software. Alle virtual machines are discoverd and showing. Also the vcenter is showing but the Esx Servers are not showing. Must I enable something on the host like the snmpd service.
Monitoring DHCP services
Hi All, Am using OpManager version:11400 (64 Bit) and would like to know on how to enable DHCP services monitoring on one of the DHCP server and to generate alarm when the DHCP service is down.
Cannot Add Vcenter to VM Manager Plus
Not able to add vCenter 5 / ESX5i to VM Manager Plus; build 11600. Tried with different mode of credentials. Gives Cannot Add Device Failed Able to access https://<vcenter server IP>/mob
Interface not discovering for Cisco 2900 and 1900 routers
I recently installed Op Manager in one pc and added two router for monitoring purpose. But I am not able find interface details. I have done the rediscovery and deletion/addition. What could be issue?
Real time graph monitor for interface traffic utilization on new UI?
Hi there, OpManager build 11600 I think this has been asked before but can't remember where. Also, I used the Screenshot feedback but not sure if this is a one-way feedback since it didn't ask for my email address nor other details. Just in case... When using the old UI, I can get the real-time interface traffic by: go to switch details page click on Interfaces on each interface, I can click on the icon on the right-most column When using the new UI, I can't find this option anywhere. Anyone knows
Erase serveur
Hello everyone, I'm new in the community. I am trying to test the free version of OpManager to whether the product matches our needs. First, it is well. I miss him still some information. For example, how to remove a peripheral monitoring? I have clicked on "delete" and it tells me that it is deleted, yet I can not test the product on other peripherals, the maximum being reached ten. Pouver you help me? I exuse for my English. Best regards
VM Performance Monitor
VM Performance Monitor does not allow me to set "consecutive times" for monitoring? Is there a way this can be set?
OpManager URL Monitor TLS v1.1
Hi, We have hardened one Web Site, and as part of our security team recommendation, we completely turn off SSL v2 v3 and TLS 1.0. Couple of our URL monitors is failing now, not able to reach the website. Is there any settings that I could change to allow OpManager talks TLS 1.1 against that website. ?? Thanks,
Disk related monitor fir linux
Hi, I am not able to add disk related monitors for a linux machine. I tried deleting and readding the node already but it didnt help. Its being monitored through CLI and memory, CPU monitoring is fine. where as free or used disk space monitor is not getting added.
OpManager stops responding when I add WMI credentials
Trying to add WMI credentials. I set Name, Domain\Username and password. When I click Save the webpage with the modal window freezes and after a while the webbrowser tells me the page has stopped responding. When I refresh the page the credential is not added. Tested in Edge and Firefox.
ADMIN PASSWORD LOST
Hello, How can I restore the admin OpManager or change it? the password is forgotten and we do not have access since that Any Help Regards,
SQL EXPRESS 2008 R2 x OPMANAGER 11 --- FAIL
Good morning Mr. ,
I'm having SQL Express 2008 R2 database connection problems with OpManager 11 .
Is there any procedure to follow ?
Thank you !
How to monitor a Site to Site VPN on a Cisco ASA
We have two VPNs setup on a Cisco ASA 5525. We are currently using IPCheck to monitor the tunnels. We are looking to move away from IPCheck and I am looking into OPmanager to see if it can provide just a basic ping monitor for these VPN Tunnels. Thanks, Justin G.
Credential Hyper V
Hi, While creating a new credential WMI, I should give "Domain Name \ User Id" of an admin account or an user account is enough? Because when I add a hyperv host with an admin account it works perfectly but with a standard user account nothing (a normal device only is added) Please tell me if the admin account is must. Thanks
Opmanager problem
Dear , We are getting the below error message when we try to access ManageEngin. Please advise. I can't open OpManager throw web when we tried to open it using remote desktop we get the below : .\conf \ports.properties (Access is denied ) I tried to restart the services and the server and get the same , Thank you
Connecting MySQL database of IT360 / OPMANAGER from remote host
Greetings, Please help me on the below; Connecting MySQL database of IT360 / OPMANAGER from remote host. Regards, Sathya
OPManager not starting up
We had issues with our OP Manager server today. After restarting the service it hangs at start up. After reviewing the Wrapper log it get to ( details below) and does not go any further. STATUS | wrapper | 2015/08/18 22:16:30 | Java Service Wrapper Professional Edition 64-bit 3.5.15 STATUS | wrapper | 2015/08/18 22:16:30 | Copyright (C) 1999-2012 Tanuki Software, Ltd. All Rights Reserved. STATUS | wrapper | 2015/08/18 22:16:30 | http://wrapper.tanukisoftware.com STATUS | wrapper | 2015/08/18
Import CSV File into OpManager
Hi, I have a many devices (aprox 2000) and all of the devices must connect with google map, and i want to import them (csv), but i dont know the fields that containts longitude and latitude, for now i just know DeviceName, DisplayName, and DeviceType fields. does anyone know the fields that containt the longitude and latitude for the google map? Thanks
Close incident when alert is cleared
Greetings, I've been told that OpManager has the ability to close the incident generated by an alert when the same has been cleared. I'm using ServiceDesk 9.0 and OpManager 11200 but the incidents opened by alerts in OpManager remain open until we take manual action. Could you guide me on where should we configure that? Attached a screenshot of the current config. Thanks, R
OpManager fails to get CPU utilization
Hi, I have OpManager EE runing. I have all servers SNMP enabled. But OpManager is not showing the CPU utilization of my Linux server which is a 4 CPU server. memory,disk,etc... are ok..no problem with them.when i try testing the monitor it fails only for CPU utilization. any other SNMP configuration for 4 CPU servers? for other two CPU windows servers it shows the CPU utilization for both the CPUs. Rgds, Rajkumar
Memory Utilization Linux CLI No Longer Valid
Not that it was very accurate to begin with, but... The command /usr/bin/free -b | awk '/Mem:|cache:/ {print $2,$3}' | sed 'N;s/\n/ /' | awk '{print ($4*100)/$1}' no longer works on CentOS, assuming Fedora as well. The buffers and cache was removed on procps-ng-3.3.10 https://bugzilla.redhat.com/show_bug.cgi?id=1158828 How can I get Memory Utilization from RH systems where SNMP is not an option?
Next Page