exclude drive/volume from space checks
we are all of our page file drives setup at the "P" drive and they all show up as "Volumes with the most usage".. Is there a way to exclude all "P" drives? Thanks in advance Mike
Opmanager shows more VMs on dashboard than in Inventory
Please explain why OpManager (build 11500) shows more VMs (Number of VMs on summary dashboard ) than in Inventory Details:Summary shows 9 VMs on host (fig1.jpg), but inventory only 7 VMs (fig2.jpg). Figures is attached. Regards
OpManager12 Webinar 22nd November 2016 - Question/Answers!
Hello Everyone, Thank you very much for the overwhelming response in our OpManager12 Webinar session(video). It was a great experience over all. There was no surprise that we had many questions during the Question/Answer session and unfortunately we weren't able to answer all of them due to insufficient time. Herewith attached the compilation of all the questions with answers for the benefit of the wider audience. Please check and comment below for any more questions. Cheers, Suresh Bagavathy OpManager
IE Compatibility?
Hi There With IE 11.0.9600 I can' see the table for DB Query and other support tools
Regarding categories question
Hi all, Please be infomred that I created a category call "file server" which include 10 servers and other category call "FTP" include 5 servers. May i know can i create a category call "infa" then include above 2 categories then monitor all servers (total 15 servers.)? thx
Multi Delete Devices Server Crash
Hi there This is the third time, I'm just testing the OP12.2, I have add devices and when I delete these devices with multi select the warpper service crash and restart. I think it is need to check these issue Regards Ivan
Opmanager 12 - ssl?
I've installed an opmanager 12.1 installation, to look at the changes, while we wait for migration update for 11600. The documentation for opmanager 12 (link) points to old install documentation, which is no longer relevant. I need to SSL this to securre the active directly authentication option.. where is that document?
Can't restore database on new installation OpManager 10000
Hi, I did fresh installation OpManager 10000 on Linux machine and try to restore MYSQL database from backup made by same OpManager build (same Linux). But restoration not successfully completed. In restorelog0.txt I have: [11-22-2016]|[15:14:31:553]|[FINE] : ************** Restore operation started ********************** [11-22-2016]|[15:14:31:553]|[FINE] : Restore started on 11-22-2016 at 15:14:31:553 [11-22-2016]|[15:14:31:554]|[INFO] : Extracting property file please wait .....
Setting up SNMP OPManager v12
I want to setup SNMP credential but I'm confused as to how to do it. Not sure what to put on the places I mark below.
Windows AD security with nested groups
Hi, We have group hierarchy like the following: - adm user account - member of general admin group - this group is member of OP manager admin group. this is so we have roles / function groups within the AD. is this a workable solution ? kind regards Bauke
OpManager license
Hello i would like to know if license of opmanager 11.6 is compatible with opmanager 12.2 Regards Franco
Upgrade assistance
I have downloaded the latest version of OpManager. I cant figure out as how to upgrade from earlier version of 12. when I run setup, it says I must un-install older version. I don't want to lose any configuration, please let me know the steps to upgrade to latest 12.2. from earlier version of 12. thanks
IPAM & SPM Add-On for OpManager trial license
Hi, I'm new administrator in this office and newbie with OpManager standard 11.6/ I would be interested in IPAM & SPM evaluation since it just expires after activated yesterday Any other new way to get the new eval key for the purpose of assessment?
Opmanager monitor "Units" is in percentage even after changing to "GB"
I want to monitor my disk space in GB instead of percentage % because different disk has different sizes and percentage is not the best way to monitor disk space for 100s of servers. I tried to change monitor units to GB but it still gives me % value, see screenshot attached. any help to rectify this issue. Thanks
OPM 12.100 can not use Domain Credentials - domain allready exist
I have set up windows auth. It is allready working. I have added one operator. Now I want to add additional users and I can`t It seems that OPM can not see earlier entered and configured domain
Interfaces Up and Down notification
Hi There Opmanager 12.2 I have about 100 switches listed in my opmanager, If I don't want to receive notification when some interfaces going up and down I have to unflag the status PO option? but I have to click in the interface one by one??? No multi select option?? (it was there in the OP 11) For examble I have clients switches and I receive the notification every day when the users shutdown and turn on the computer, because the interface go up and down, but I want to receive this notification
OpManager 12.2 upgrade issue
While upgrading from 12.1 to 12.2 I am getting error All services for OpManager are shutdown wrapper and java not running in task manager
Creating new group and moving devices, but they revert back to old group
Hello Everyone I have been trying to cleanup our OpManager layout and define a better design. As I create new groups, then import proper devices into those groups, I find the next day they have moved back to their previous group How can I make this not happen? Build: 11600 Thanks
Op Manager 11.5/Client Web Alarm -- No Sound
Team, I need your help on enabling sound on a web alarm for the client login, what happened some power user has muted the sound for all. We tried recreating the profiles and run program, we were able to see the web alarm flashing on the top right. We are now missing the sound on the Web alarm. Any thoughts on this case. Regards.
Unable to load mib From HP
Hello i'm tryng to load the mib using mib browser: vc-domain-mib vc-module-mib vc-qos-mib Downloaded from HP web site: http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04272529 Version 10.40 But i've some errors. Attached the mibs Could you provide an help to solve this issue Regards Franco
OpMan v12 upgrade assistance
Hey guys I've been having some issues upgrading our current OpMan v11 Central server to the new v12 version. I've downloaded the 64bit v11 essentials .exe from here: https://www.manageengine.com/network-monitoring/download.html?v12banner Firstly, is this the in-place upgrade for current v11 customers to move over to v12? If so, would you be so kind as to provide me with the steps on how to go about the upgrade. When I run the .exe on the central server, it installs a probe and doesn't upgrade the
opmanager 8
hi there, the server that run my opmanager 8 had down and unable to repair. so, i got a new server and installed version 11, so wondering how can i transfer my account and also the database? as i got perform the backup. thanks.
Rest Api to get device temperature and humidity
Hey All! We've a legacy system, which gets device temperature from OpManager's PGSQL database. There is rest api called getDeviceSummary, can i use it to read temp/humidity. Tunca
OpManager12 Webinar - Register Now!
Hello Everyone, We are organizing a webinar for our customers to educate how to upgrade from OpManager version 11.6 to 12.2. The webinar's Agenda includes: Evolution of OpManager Version 12 and its significance Benefits of an integrated tool Existing users - How to migrate in three simple steps? Webinar details: Speaker: Suresh Bagavathy When: Tuesday | 22nd November 2016 Time Zone: 10:00 AM EST | 3:00 PM BST If you are interested in attending, please register here. Cheers, Suresh
ESXI not showing all the details
hii, Unable to view VMWARE ESXI active Process , hosted machine details graphs etc. Iam configured SNMP and added VMWARE credential. Both credential passed
Opmanager reverse proxy
Accessing OpManager via HTTPS Reverse Proxy We would like to access OpManager via a reverse proxy over https externally. Internally we access OpManager via http://internaladdress and externally we would access it via https://externaladdress We cannot allow direct external access to an internal server over the internet which is why we have a reverse proxy (NS) in our DMZ for this purpose. anyone implemented this?
Simple script monitor
Hello i've a simple script monitor : cat /home/backup/finale.txt exit 0 I've the following result : Script Result Exit Code 0 Message Script message not found/invalid script message format - Please refer the help card 'Output Format:portion' for assistance. Inside finale.txt is writen: Data: host01 <number> host02 <number> host03 <number> The instance name and value are separated by a TAB space ( using in bash host01\t<number>) Is that normal ? Regards Franco
Reverse proxy for opmanager central
Hi, I have opmanager enterprise edition, and mi central now work on default http port (tcp 80) I have 7 probe correctly connected from our customers. For security reason I need to implement and reverse proxy. For this reason I installed an server in DMZ network and I used IIS with ARR. The IIS it's configured to work on https port (tcp ip 443) Internally (LAN) the reverse proxy work correctly. Now, i want to change externally the central port (fron direcltry http to https with reverse proxy). It's
To opmanagers MANAGERS
Hi, Today we decided to do a transition to Solarwinds, It's more then a year that there was update, still struggling with 11.6. We don't have time to do a remote session any more. Our concern is not the technical persons in this question but more the lake of communication from your director and managers. They had to inform there customers. Instead they let the technical people communicate through this forum. Its there job to COMMUNICATE by problems as this!
How to manual input MAC address at the web GUI?
I open the IP address detail over the web browser on client PC but the MAC address field not allow me to manual input anyway can do it?
API questions
Hi, Im trying out your API and is having some problems. listDeviceTemplates is not showing all the fields needed to update the template or to know what oid is mapped to what template viewDeviceTemplate is not showing anything but a empty field named: configData i was hoping to get detailed information about the template... updateDeviceTemplate has a depricated/faulty documentation. it says that these are req. fields: category=switch vendor=3com IconName=switch.png isOidUpdated=no oidStr=.1.3.6.1.4.1.43.1.8.41
Linux CentOS parition details
Hello i'm using standard snmp queries provided by opmanager, but i've some monitor (Partition Details) that are wrong , how can fix that ? (Linux CentOS 64 bit)
Scheduled time for script monitor
Hello i would like to know if is possible to schedule a script monitor, i mean if is possible to set a time (HH:mm) for a script monitor. Regards Franco
Juniper Devices
Has anyone tried to create Juniper device templates for the recent stuff? Daren
Cisco 3850 Series Switch Device Template
Hi, Someone please share the Cisco 3850 Series Switch Device Template. Thanks, Ramesh
OpManager agent
Hello i've some Linux servers that for security reasons are unreachable, i would like to know if exist an agent for linux that send information to opmanager (like CPU , MEM , Disk Space) Regards Franco
URL Monitoring Service Down when Website is Ok
Regards, I have a website monitoring and I'm receiving alarms indicating that the URL Service is down (reason: host is unreachable), but when entering the URL in a browser I can connect to website. I appreciate you cooperation to fix it. Best regards, Johan Mateus
Opmanager 11.6 vs 12.1 (info about opstor)
Hello i'm considering to install opmanager 12.1 and migrate all configuration (and license) from 11.6 to 12.1. I would like to know if 12.1 is "mature enough" to replace 11.6 or is better to continue using 11.6. Is opstor pglugin still avaiable ? i've a lot of stoages to monitor. Best Regards Franco
SQL Server 2016 upgrade/db compatibility
Good day Our DBA's will be upgrading our DB servers to SQL 2016 but will be keeping our existing probe databases running in compatibility mode. Will this have any negative effect on the functionality of Opman? Regards, Mat
New Trap Processor
Hello i've a server that forward trap from 30 servers in this example are only two (SERVER1 and SERVER3) No Trap Parser defined for received trap: TrapOid : .1.1.1.1.1.1.1.1.1.1 Variable Bindings: sysUpTime.0: 0 hours, 22 minutes, 46 seconds. , snmpTrapOID.0: .1.1.1.1.1.1.1.1.1.1 , .1.1.1.1.1.1.1.1.1.1: rule=High System Swap Utilization, state=ACTIVE, severity=HIGH, host=SERVER1, service=APPLIANCE, alarmid=313-0920-0006, policy=SA custom Host Monitoring Policy, stat=SystemInfo/Swap Utilization, value=100%
Next Page