opmanager 12100 problem
opmanger used maps.googleapis.com, but I locate in China . so when i open opmanger, It's so slower. and it try to open maps.googleapis.com, but you know it can'nt open maps.googleapis.com. so , how do i ? Thanks !
SNMP Trap Help
Hello, I Have created some IDRAC SNMP Traps in Opmanager and they are working pretty well. I have one trap which reports on one OID to warn it has gone over the threshold OID: .1.3.6.1.4.1.674.10892.5.3.2.1.0.2162 Failure Component : $Source_IDRAC-MIB-SMIv2_alertTemperatureProbeWarning_trap Source: $Source Message: Temperature Warning on $SourceMO(displayName). The trap details are as follows, alertSystem=$0 alertTableIndexOID=$1 alertMessage=$2 alertCurrentStatus=$3 alertPreviousStatus=$4 alertData=$5
Need to modify the email notifications
I need to understand the logic behind the email notifications. I need to be able to modify them and cannot find a good resource on what each field can contain and how to transmit the message I need to my operators.
How to migrate from MS SQL version to PostgreSQL
Gents, Could you explain, how to migrate OpManager from MS SQL to PostgreSQL version ? As I can see, PostgreSQL is not installed on OpManager's server. I need to move sql db to PostgresSQL because MS SQL Express is limited 10Gb db size. Thanks
Monitor IBM V5020 \ V7000
Hi Running version 12200 of opmanager. I'm trying to monitor the performance of an IBM V5020 and V7000 - How do I go about doing this? I've downloaded the MIB's file and copied it into the mibs folder. I've setup the v7000 smnp to point to the server with the snmp password but struggling to get the 2 to talk. Thanks Andy
OpManager License Activation Details
Hi, I was created a new user and when I'm loggin send this message I did not want to see this view, I want view other view with overwiew an the list of devices. Thank you for your help!
Migrating from {Postgresql to MSSql
I have been searching for how to migrate from Postgresql to MSSql. Is there a documented process for this?
How to delete partitions in bulk ?
Hi I have turned on partition details monitoring in one of our servers and the monitor picked up all the partitions on the server. The server has got like 100+ partitions and I cannot see any options to remove them on bulk like what we used to have on the old interface of Opmanager. How do i go about removing the unwanted partitions in bulk ? Do advise.
Alarms - Api Client- OPM
Hi, I have an incident with an user and this user who is using the Api Client, but in Alarms I could see alarms from other customer that this user shouldn't see. In this case the user shouldn´t see nothing about FAWMSARC. In fact, the name of "Fuente" should be FAMACRO07 not MN-CPLLT-16.
Migrate OpManager from Postgres to MSSQL
I am trying to migrate from Postgres to SQL server. I followed these steps. 1. run BackupDB.bat 2. Stop Opmanger Service 3. run DBConfiguration.bat (the database_params.conf does not get updated it still points to Postgres) 4. run Restoredb.bat The DBConfiguration.bat does create a new database on the remote server. But when I run the RestoreDB.bat I get an error message of "Invalid License file". If I click OK the restore goes back to Postgres.
who to change the default ?
I have installed this trial and wondered how to customise the web adddress? For example, the default is http://localhost:8888. In ManageEngine OPManager can i create my own alias? or ip address for open the OPManager
Monitoring VMware ESXi hardware using Opmanager v12
Hello, I'm using Opmanager 12200 and trying to figure which settings on ESXi that I need to enabled in order for Opmanager to monitor the host's hardware. So far I've applied SNMP community name and destination on the ESXi's snmp.xml file. And rediscovered the host using SNMP and Vmware credential. But the hardware readings are still not available. Does anyone know? Currently the hosts are standalone without vCenter.
upgrade opmanager from 11400 to the last version 12.2
Hi, how is it possible to upgrade or version opmanager 11400 to the last version see below détails wo lost our configuration About OpManager License Type : Essential Licensed to : Thierry MARCHAND Company Name : CGSPACOD Installation ID : 582302000352411542 Build Number : 11400 Latest Version :N/A Expires on : Never AMS Expires on : 27 Feb 2016 12:00:00 AM CET Maximum no of Devices : 250 Maximum no of Users : unlimited Total Monitored Devices : 241 Total Monitored Interfaces : 3943 Total
Opmanager 12 - Unable to switch monitoring back on for some ESX hosts.
We have noticed that some ESX servers are not being monitored, a rediscovery of vCenter does not seem to make any difference. Clicking on the play button and adding an IP address to discover does nothing either. Any help would be appreciated. Sys Admin University Hospitals Bristol NHS Foundation Trust
Device Templates
Use Device Templates to configure the same threshold value for one or more performance monitors associated to devices, that belong to the same device type.
Storage monitoring on Opmanager 11600
I have licence version of opmanager 11600. I wanted to add some EMC storages in current version of opmanager for complete monitoring. DO i need to purchase separate licence of opstor or just need to install its plug-in. After installing plug-in, will i need to open another url for opstor, or we will get monitoring gui within opmanager gui only.
Storage Features in opmanager 11600
I wanted to know storage features in opmanager 11600. At what level monitoring can be done. Do we need opstor for that.
orphaned problem about
Hi, Can you help me please ? On several vm servers are orphaned to status.What can i do? Thanks
IP Management - Subnet usage reading 100 percent for all subnets
Good day, At the moment, I'm trying to use OpManager's IP Management feature to track usage of various subnets within our organization. When I add a given subnet, it correctly identifies the number of IPs being used; however, it does not correctly identify the number of available or transient IPs. Likewise, it is currently indicating that all IPs within all subnets are currently in use. In the attached screenshot, there are seventeen used IPs within the subnet, which is shown correctly (see bottom
SNMP request stopped working -> how to detect
Hi, We monitor several servers, switches, firewalls and UPS's. Recently, due to a firewall fault, the SNMP request for a server did not respond any more. We attach Notification Profiles when a threshold is reached but no alarm was given because when we don't get a new value, no threshold is reached, so no alarm is triggerd for us. Yesterday, we got the same issue again with an UPS. The SNMP Requests were not getting any value back (although it worked through the MIB Browser). Removing the UPS, and
How to create shortcut in Business View/where to find documentation (build 12200)?
Good day, I'm currently attempting to build some drill-down style Business Views in OpManager, and am running into the problem that I can't track down how to add a shortcut to another Business View. The only documentation I've been able to find on this is through https://www.manageengine.com/network-monitoring/creating-business-views.htm, and due to changes in the interface, this no longer seems to apply. Effectively what I'd like to do is have a shortcut that says something like "Shortcut to Remote
Config File Manager is free or it includes any license!
Hi, is Config Manager is free tool in OpUtils ? Thanks, Sainath
Monitor ESX server in Opmanager v12.2
I have successfully discovered Vcenter server in Opmanager v12.2 with Vcenter credential, and I could see DataCenter/Cluster/Hosts/VirtualMachines in Inventory/Vcenter page, which is really impressed. Just one problem, I cannot access to ESX server and monitor them and get performance value. Please check the figure below, Comparing with Demo.opmanager.com, vCenter has discovered and ESX hosts can be monitored and shows status clear (as figure below). Did I lost something?
OPUTILS 12.2 add coloums in IPAM and SPM
we haven't found any way to view additional coloums in inventory we need ifalias as default coloums in SPM, but no way to add or remove default coloums
OPUTILS 12.2 no AD Connection
one of our two domain is impossible to be addedd to oputils, in version 8 we have no problem with it one added is: xxx.it one not added is: xxx.yyy.it (we are domain admins, but not enterprise admins) both are same level od AD Forest, Domain ad DC OS no error, simply window to add domain don't close
OpManager fail to start on Linux
Linux servers failed to start /opt/ManageEngine/OpManager/bin #./StartOpManagerServer.sh Java Home /opt/ManageEngine/OpManager/jre file:/opt/ManageEngine/OpManager/conf/ui.properties [OpManagerUtil] Value not set for COLUMNSTORE INDEX in severparameters.conf file.Kindly set USE_COLUMNSTORE_INDEX true/false in serverparameters.conf file [OpManagerUtil] COLUMNSTORE INDEX set is false Licensing : Loading 64 bit library inside addon check Unable to start pgsql daemon I already try to start pgsql by /opt/ManageEngine/OpManager/bin/startPgsql.sh
database maintenance
Hello my Op manager Data base is 34gb and I am getting lag on web portal. how can I clean up my database to get the webportal to run smartly. and what is the run archive function for under database maintenance? I am running version 12.2 Robert
Is it possible to have a double-ended link in a map/business view?
Good day, I'm currently creating a business view to model some of our network hardware, and was wondering if it's possible to create a link between two devices that effectively indicates that one interface on a given device connects to another interface on another device? What I'm attempting to accomplish is having a map that shows the physical topology of our network that also (relatively easily) shows that when a physical link goes down, it connects to a particular interface on each device. At
Custom mibs for ibm flex chassis
Hello is there a guide to adding custom mibs for Ibm flex chassis adding them to Op manager 12.2? I need a bit of help getting it working , it works and polls in the mib browser but that is as far as I am getting, it doesn't work when I try to get it inside Op Manager. I am probably doing it wrong, Any help is appreciated. Robert
Oputils 8 performance issues
We are having major issues attempting to move to Server 2012 and Oputils 8 , SPM is extremely slow at scanning and will eventually just stop scanning. Anyone else attempted Server 2012?
OpManager and Service Now Integration
Hi there! I need to create a integration between OpManager and Service Now. The goal is to open a ticket (INCIDENT) in Service Now to some alerts in my OpManager monitoring. Service Now has a API that allows me to make a call and create the Incident. OpManager can make this call to the API? Thanks in advance VC
WAN monitoring and SNMPv3
Hi, I am having trouble getting WAN monitoring to work using SNMPv3. In contrast, I have had no problem getting it to work with version 2c. The error I get when I try to add the WAN monitor is: "Add monitor failed - Check whether SNMP port and write community are properly configured for the device." The Cisco configuration for SNMP v2c I used is below: snmp-server view MY_VIEW iso included snmp-server community public view MY_VIEW RW snmp-server host <ip-address> public rtr For SNMPv3 I used the
How do Install the probe?
Simple as that. When I download and install I don't see what makes the install a probe that I connect to a central server?
Monitoring temperature of Cisco router not behaving as expected
Hi all, I'm currently attempting to set up temperature monitoring for some Cisco routers on our network, and am running into an issue. If I view the dashboard for a particular router, and select the "Hardware" option, I can see the Hardware Report showing three temperature sensors (switch 1 - temp sensor 1, green; switch 1 - temp sensor 2 - green; switch 1 - temp sensor 0, green). These appear to be reporting their respective temperatures correctly. The problem occurs if I attempt to view the monitors
Can I add multiple alerts in the URL Monitoring section in OP manager
I am new for OPManager. I want to know whether i can add multiple email address on the send alert notifications box or not. Actually I want to add multiple mobile email address. For eg: mobileno@vtext.com, mobileno@email.uscc.net
Upgrade 12100 to 12200
Hi We are currenly running v12100 with 2 probes. I have download the service pack to upgrade to 12200, do I use this to upgrade the probes as well. Do I do the probes first or the central server? Thanks
Unable to log in to Opmanager 12 Server
We have been trying to configure AD passthrough authenication on our Opmanager 12 server. Unfortunately we have lost all access to the server, we are not even able to log in with the local admin account. We are prompted with a login which will not accept any combination of user/passwords Any help appreciated. Sys Admin University Hospitals Bristol NHS Foundation Trust
oPmANAGER 12200 - No VMs in ESX list
Hi We currently running OpManager 12200 and after do the discovery from inventory We cannot find any VMs list inside the ESX host (please refer photo below), I did -re-discovery but the result just same
Why OPM ver12.2 add IP SLA WAN monitor have to configure traps rtf first
Following are the steps to enable WAN monitoring in OpManager: 1. Configure the Cisco Routers to send traps to OpManager To configure OpManager machine as the SNMP Server receiving traps for the routers, telnet the router and use the following command: snmp-server host <opmanager server IP> traps <host community string> rtr For instance, if the OpManager host IP Address is 192.168.18.128, and the community string is private, the command would be: snmp-server host <opmanager server IP> traps private
OpManager service won't start; error: System going to Shutdown --- received process interrupt
Hey there Our probe just keeled over and died last week and we haven't been able to get it back up, even by restoring it from backups. I've bounced the box a couple times, checked the db parameters (all correct), opman account has sys admin permissions to the db, so everything seems to be on the up and up there. Please read below excerpt from the wrapper log and advise accordingly: STATUS | wrapper | 2017/03/14 12:53:01 | --> Wrapper Started as Service STATUS | wrapper | 2017/03/14 12:53:01 | Java
Next Page