To change hardware monitoring for dedicated devices
Hi, I have several cisco switches which are connected via 1 powers supply. Currently I have alerts about second power supply. Is there any way to disable hardware monitoring for power supply unit for dedicated switches only? OPmanager: 12200
webserver port 80 is occupied. Change the port by executing bin/changewebserver script -- error
Hi Have installed 30 days trial version, when i tried to open Opmanager it gives me the below error message webserver port 80 is occupied. Change the port by executing bin/changewebserver script Thanks and Regards Chandra 9963117567
Problem with loading mibs for HP 5500 and Cisco SG300 switches
Hello, I use a trail version of OpMangaer and I wanted to monitor my switches the HP 5500 and Cisco SG300. I loaded the mibs I got from my vendor to op manager but when I want to see them in the mib explorer the uploaded mibs are empty. Is there a converter or something of the sort for OpManager?
WMI authentication fails temporarily for several (maybe all) servers, then starts working again
I recently created a file monitor for three of my servers. Now OpManager unexpectedly sends a notification that the file doesn't exist when in fact it does. I have found that when this happens, testing credentials on the monitored server from OpManager fails. When I check WMI credentials from OpManager on other servers, the check credential task fails as well. Then after a couple of polling periods I get an all clear notification and the credential test passes. This has probably been happening for
Cannot apply new license after old one expired
Hi, thanks for reading! We had an OpManager v11 deployment, and we upgrade it to 12.2. A few days after that the license expired and the services stoped working. I tried to start the services and apply the new license by runing "\bin\run.bat", but when the script ask me for the license i get this "Invalid License" error: The license file specify the following OpManager info: <Product Category="OEM" Name="AdventNet ManageEngine OpManager" Type="Essential" Version="9"/> Is there something wrong with
SPM Issue
Hello, We have an issue with Switch Port Mapper, it does not show some information like Connected MAC, IP Address, DNS Name, Device Type. But, it shows only Interface name, Port no, Port status, Vlan Id, Vlan name, interface speed. Currently we are running OpUtils Build# 12200. We are using Cisco switches with SNMPv3 configured with auth and priv. The last switch that we added is Cisco Catalyst 3560 with IOS , 15.2(2)E4. Highly appreciated for your support to resolve this issue.
How does one edit an SNMP Monitor?
I added three custom SNMP Marker Supplies monitors based on the printer MIB for a Dell B3465dnf printer. At the time I was walking the MIB, I did not have the values to determine which OID related to Toner, Imaging Unit, and Maintenance Kit. I would now like to Edit the SNMP monitor to show the correct Supply and Units.
SMS flooding
Hello We are starting to get infinity SMS flooding, because SMS dispatch is not set in the SMS queue. We only see this when multiple alarms are recorded at the same time. When this happens, then we need to delete the SMS queue, but how do we prevent the SMS Queue to go into an infinity loop? I have received the SMS's on both 6917 and 6919 more than 30 times and it only stops if I delete the queue. Example below, shows the number of SMS's in the queue: | 6916 | 20832598 | SE1201.lutdak.local (DomainController)
Upgrade from 11600 to 12000
Hi all, I have been looking around trying to find instructions on how to upgrade to the latest version (including in the announcements section) but I can't seem to find anything that has clear instructions. Can you help with this?
OpManager v12 - VIWMI monitors still an issue
Good day We installed and are loving the new OpManager v12, however we came across an issue that affected the previous version as well. The inaccuracy of the VIWMI monitors, specifically the amount of available memory on our Hyper-V hosts. The System device details pulled through the information correctly though. (please see screenshot) Is this something that is prevalent in OpManager, or is it some factor on our side causing this inaccurate reading? There are other instances, like the difference
OpManager Enterprise Edition v12.1 released!
Hi, We are glad to announce the release of OpManager Enterprise Edition (EE) v12.1. It includes a great set of new features and enhancements that might be of interest to you. Major highlights: Integrated network management: Tightly integrates NetFlow monitoring, configuration management, firewall log management, and IP address & switch port management in one exe as add-ons (no addition download is required) Intuitive GUI: Includes new Fluidic v2 GUI for the central and probe with customizable dashboards,
OpManager only querying SNMP version 1 not version 2c
I was querying a device, but OpManager (latest free version, installed today) only queries in SNMP v1 not v2c, as seen in the packet captures I analyzed. My device doesn't answer SNMP v1 so ignores the query requests. OpManager does not allow me to select v2c since there's no distinct option for that. Am I missing something? Thanks, Keith
Bandwidth Graphing Options with OpManager
If Cisco devices (in my case, older Cisco switches) don't support Netflow, does OpManager offer any kind of bandwidth graphing? I see the "Top 10 Interface Traffic" reports, but I'm looking more for a graph to look at usage over a period of time. Something like PRTG / MRTG / Cacti.... Didn't know if OpManager can go this far, or if Netflow is a requirement to get that level of granularity? Any assistance is appreciated.
Oputils SPM
Attempting to move to Windows Server 2012 with Oputils 8 and it hangs up on SPM import and will only import a limited about of devices, it hangs nmap,exe and conhost.exe (command prompts)on the server that cannot be killed and the server has to be rebooted. Anyone else having issues with this? Attempted to move to version 12 but they have not incorporated imports in SPM and IPAM and missing Tree Hierarchy in IPAM.... I attempted to load 70000 and ran into similar issues...
URL Monitoring TLS 1.2 support
Hi, thanks for reading! Does version 12.2 of OpManager supports URL monitoring of HTTPS with TLS1.2? if not, is it going to be supported in future releases? Regards!
How do I recover the side menu bar in OpManager 11?
Somehow the side menu bar vanished and I'm unable to select different views such as Servers, Inventory, Alerts, etc. I'm accessing OpManager in Chrome. I've cleared my cache and cookies and restarted all instances of Chrome.
Device Templates
I have some virtual windows 2012 servers. They are asigned to both the VMwareVirtualMachine and Windows 2012 R2 templates. I want to remove the devices from the VMwareVirtualMachine and just use the Windows 2012 R2 Template. If I go into the associate section of VMwareVirtualMachine and remove the device what ever I do afterwards associate or apply & overwrite the devices are never removed. Any advise? Andy
Opmanager audit usage
We are using Opmanager with SQL Server backend on Windows 2003 Server. Is there a way to find out which user cleared an alarm as we have mulitple admins clearing alarms and need to find out who is doing what as some important alerts are being cleared. Many thanks, John
How to Increase number of servers in "Health Report" ?
Hello, I'm using Opmanager to monitor all devices/servers. And I have to export health report weekly. But the health report shows only 10 devices/servers as pic. How can I increase more than 10? Thank you.
Create network topology map
I am trying to create a diagram of all the switches and routers in my network.Is it possible to create a Network Topology map using OpManager? If so, how can this be accomplished?
OPmanager Downtime Scheduler
I've upgraded to 12200 from version 11. I'm struggling to find the same features in v11 for example where is the downtime scheduler etc. There doesn't seem to be an admin tab like the v11.
Discover button broken for IP Mapping ESX server in Vcenter?
Ok, So when I am in the vCenter properties, I see that many of my ESX servers (all the same version) are monitoring, while others are not. When I click the green arrow to start monitoring, I get the IP Mapping screen. This has all of the available credentials except vmware ones, however I have a CLI set up for the hosts, so I select that. What is odd though is that the discover button does not work. Everything else on the page does something, but that button is unresponsive to anything. What am I
Page Layout does not persist between sessions
The "Page Layout / NOC Screen Alignment" feature doesn't seem to persist between User sessions. I have to reset the alignment to "Wide" each time I close and open the browser window.
Show all supressed devices
Hi, I was wondering if it is possible to list all the devices with "forever" suppressed alarms in OPmanager. Some report or DB query? Regards, Ivica
Stop Importing VM's into OpManager
I have 12.2, and set up my Virtual Center for VmWare. (not hosts). There are quite a few machines on there that I do not want in OpManager (VDI, workstations, etc) that OpManger keeps importing into the configuration and violating the license. How do I make it stop importing all these unnecessary machines? Thanks! -Chris
Internal Communication Ports
I see there is a NMSSocketPort and NMS_FE_SecondaryPort . I'd like to understand what sort of communications take place, and is there any way I can capture this network traffic?
Opmanager 12.2 Database Repair
Can someone tell me how to run a PGSQL repair in version 12.2 There doesnt seem to be a repairdb.bat file anymore. Thanks Sys Admin University Hospitals Bristol NHS Foundation Trust
Error when load MIBs file
When i upload MIBs file into Opmanager is success but when i load MIBs file there is error. Please tell me why and how to load file MIBs. P/S: I send you error image and MIBs file Thanks.
OpManager Probe server requirements
Hi all, What are the HW requirements for a W2012 probe server (cpu, mem, etc.)? Kind Regards Roger
Sending SMS alert messages
Hello, We have implemented Opmanager around a month ago, everything is working fantastic and the setup for email alert is simple! I also want to setup alerts by SMS, i registered a clickatell account and put in the user and API settings in Opmanager. However when I make a notification rule and i click on test, Opmanager freezes for about a minute but nothing happens and no SMS messages are sent. Can someone tell me what i am doing wrong? We are running the latest version of Opmanager
opmanager - device icmp monitoring
Hello, Can you tell me how frequently is Opmanager ver 12200 doing icmp polls to network device and how many icmp checks is done in each poll ? How are calculated reports/statistics of Devices by Response time ? min,max,avg of what checks ? How Opmanager gets the value "Response Time" in the monitoring device screen ? Is it via snmp ? if yes which OID ? thanks in advance
Layer 2 Discovery cannot run
Hi Picuture below shown it cant be click anywhere in discover button anyone?
Custom report
Hi, I want to create a report from a bussiness view's servers. I need the perform structure, like CPU utilization, Memory, etc. for each server in the bussiness view on one month period. Is it possible to get them in one report? Or I have to schedule the report daily and copy the data to a personal excel? I see in one topic ( https://forums.manageengine.com/topic/custom-reports-1-8-2011 ) that they use a SQL query. How can use this query? I need to access into the server or can I do directly from
Custom Field - Send message
Hello, How can I configure the custom fields with the message alerts? I create some custom fields, and I put the information in one server, for example: The custom fields are activated: But when I receive a message alert, the custom fields doesn't show the values. How can I configure correctly? Thanks, Jordi.
Enabling SSL on OpMan v12
Hey there I've tried to look for How-To docs online but can only find old ones - is there an updated doc on how to enable SSL on OpMan and AppMan probes? Thanks in advance, Mat
cisco device monitoring snmp/icmp
Hello, Can you explain how opmanager build number 12200 gets following statistics or reports ? in the widget "Device by Response time" how frequently is doing checks and how many in each poll ? is it via icmp or snmp ? is the min/max/avg value calculated based on the widget time range ? Dials in the monitoring screen of cisco device How gets "Response Time" value ? Is it via snmp ? which OID ? Does it depends on the device polling interval ? Does it represents
Error when load file MIBs Juniper
Dear Support, I upload MIBs file of juniper success but when i load file it there is error bellow: Error parsing MIB:juniper-mibs-15.1X49-D70.3.zipException while loading MIB:Not a valid MIB file : E:/OpManagerProbe/./mibs/juniper-mibs-15.1X49-D70.3.zip Please Support me how to load MIBs file. P/S: I send you MIBs file and image error. Thanks & Regards.
How to upgrade to the latest version
We have Opmanager enterprise, the version is 9101, this version use the Mysql server. How to upgrade to the lastest verion? Thanks! Caijun.Luo
SQL Query question
Hello, I looking for information about maintenance problems, and I see that I cant execute some queries for solution this. When a schedule maintenance finish, some devices don't change to clear state. Well, the queries are: delete from ElementsOnMaintenance; delete from MaintenanceStart; What are this queries? It delete all the schedules maintenances? Thanks, Jordi
OpManager Internal Communication Ports
What are the internal communication ports used for in OpManager? There is a NMS_FE_SecondaryPort and NMSSocketPort. I'd like to understand what sort of communications take place, and is it possible for me to capture the traffic that travels across these ports?
Next Page