Cisco temperature bug?
Hi, Graphing of Cisco temperatures doesn't seem to work properly. The OIDs that OpManager uses for inlet/outlet temp are the same ones that I've been using with MRTG, so I know they're good and I know the router supports them. However, my graphs in OpManager just show "na"; there's no data. The only difference I can see between the graphs that work and those that don't is that the ones that work are SNMP "gets", and the ones that don't (temperature) are SNMP "get-nexts". Don't know if that makes
Trap Processor
Hello, I would like to know how to configure a Trap processor for the following trap I am receiving. I created a trap processor with this OID but it didn't work. Please let me know how to configure this BGP trap, in order to receive the different BGP status from the routers. - No Trap Parser defined for received trap: Enterprise: .1.3.6.1.2.1.15 Generic Type: 6 Specific Type: 2 Variable Bindings: .1.3.6.1.2.1.15.3.1. The hyperlink in the web client for the Create Trap Processor doesn't work. Thank
Installation Question
When you install OpManager, do you need a web server? or will it work on just a regular desktop? I wasn't sure and I didn't want to install it to the wrong place. Thanks
Add Interface to Windows Server
Is there a way to add an network interface, to a Windows server, that is not automatically discovered in OpManager? I tried using the AddInterface.bat file, but the interface doesn't show on the server snapshot page under Interfaces. The output from the batch files says the interface was added, but it looks like it is placing the information in router tables.
Cisco As5300
Dear Support, I added my cisco AS5300 device to the OpManager and it does not show me any interfaces and also it sends me a wrong alert. I am currently monitoring 2 cisco devices (Cisco 7206 and Cisco AS5300) I have setup a notification profile and associated to my cisco 7206 only. The problem is when the interface goes down on AS5300 device, the OpManager sends a notification that is associated with cisco 7206. What is the problem?
Using Opmanager with Proliant Dl Servers
Hi guys we are currently running Dl380 and Dl360 servers All of these servers are running Suse linux Enterprise server 9, each running with the proliant support packs 7.30 or 7.20 We are also evaluating Opmanager 5.5. how ever the problem is that the stats we are gathering from these servers for the cpu and memory usage are incorrect for the resource monitors. We are aware of the vender specific monitors for the proliant servers but this is not what we want Does anyone or has anyone successfully
Linux Installation
I'm installing OpManager on Fedora Core 3 for the first time and after extraction of files, I don't see the StartOpManagerServer.sh file, that is suppose to be in the home, which I'm assuming is the root of the file: Here's my path: /opt/AventNet/ME/OpManager The only .sh file that I see in the root folder is setEnv.sh. Assistance would be appreciated. Thanks
How alarm escalation works with trap?
I got a trap that had severity "critical" and not cleared within the defined period in a related alarm escalation. However, no action (predefined email) were taken. Is this a bug? Thanks, Min
Vlan
How does this product detect VLAN and can i get a picture of VLAN conectivity through switch.?? Please explain this to me in "Detail" because i am new to this concept. I require this info since i want to install opmanager at a site which has VLAN conectivity.
How to monitor remote client network?
We are a small based IT service provider and would like to know how to monitor our client network from our office. All clients have ADSL connections with ISP's and we are able to discover the client (cisco) routers routers within the ISP's IP range. Eg ISP range is 203.23.213.0 (we can discover any router here) and client router ip is 203.23.213.45 (discovered). What do we have to access our client's networks and monitor the devices? Thanks
Cisco monitors
How I can monitor traffic on Cisco 1600 using OpManager? It means I want separately monitor all otbounds traffic and all inbounds never mind in packets or bits. Now I have some monitors working Interface Input Bits - Ethernet0 Interface Output Bits - Ethernet0 CPU utilization Medium Buffer Hits They works well. But I need total traffic control I've tried Interface Tx Traffic under Traffic Monotors section but it doesn't work
Does OpManager has a solaris version?
As we know, WebNMS has a solaris version, and OpManager has a Linux version. But my Company just has a requirment for deploying Enterprise Network Management System on solaris, I want to know if OpManager has a solaris version or else how to migrate OpManager from linux to solaris. Thanks! 8)
Reports for SLA
I need to be able to generate a report that tells me what nodes are getting what monitors. for example node= server123 logical drive monitor threshold less then 5 percent free space cpu monitor threshold greater then 90 percent available memory threshold greater then 85 percent event id 6555 i need to be able to do this for all devices. I also need to be able to do groups of devices not just one at a time. also I would like to do this by infrastructure view and business view. this is very important
Active directory monitoring
I have 500 Domain controllers do you have a way to monitor Active directory? If so please let me know. I saw the package preview for exchange 2000/2003 and i think if you added an active directory monitor package that would be great.
Start OpManager as service
Hi all I need to start the OpManager on my linux automatically. I tried put into rc.conf. It failed. I try to login from SSH, I can start it, but as far as I closed the connection. OpManager closed. Is there any way to start the OpManager with the system boot up? Thanks
Cisco As5300
Dear Support, I added my cisco AS5300 device to the OpManager and it does not show me any interfaces and also it sends me a wrong alert. I am currently monitoring 2 cisco devices (Cisco 7206 and Cisco AS5300) I have setup a notification profile and associated to my cisco 7206 only. The problem is when the interface goes down on AS5300 device, the OpManager sends a notification that is associated with cisco 7206. What is the problem?
pass URL's in alert message detail
I need to be able to pass URL's in alert message detail of the event log alerts is there a way i can do this? Please let me know how to proceed
Server 2003 & Windows XP Resource monitors not collectin
I have the SNMP service configured on these systems with the public community set. Windows 2000 systems configured identically work. All of my XP and Server 2003 systems do not work. I have rediscovered since configuring SNMP and I have my blue star. I have no data for my default Mem/cpu/disk monitors, when I go into a trap config and click "Test Monitor" it shows "The Monitor did not respond to the test request" If I manually add a different monitor like "% disk use" it shows me a list of disks
snmp v3
Hello, I�m trying the opmanager demo, and want to setup snmp v3. In the MibBrowser only see snmp v1 y v2c. Is there any way to set snmp v3?? I have not found nothing in the documentation. Thank you very much!! Jesus
Unable to gather CPU Utilitization / other Resource Monitors
I'm currently trying to monitor a Compaq Server running Windows NT. I see the Blue icon next to the server name, but unable to gather the CPU and other resources monitor; i'm however able to get the information from the vendor specific monitors but it doesn't show up on the front page or the device dashboard. Any help please.
Notification Suspension --- This only exists in java client?
I haven't seen on the web client the "Notification Suspension" configuration. Is this something that has not been ported over from the java client? We want that functionality to exist via web access. I use OpManager more than my counterparts, so while I know I can do this from the java client, I don't feel that there should be a challenge for the user, to discern which client to use for something simple like suspending notifications on a device, while it is being worked on. Thank you
need an assigned to custom field
need an assigned to custom field. in the alert screen when an alert is acknowledged i would also like to have a custom assigned to field option. for example alert is in an acknowledged state and it can also read assigned to server operations. Please let me know how i can do this. thank you
Report
Hello, Is-it possible to get a pdf report (cpu, memory) for a server selection (not all server in the database) ? Thanks. Rgds, Romain
Opmanger installation for Windows Service start/stop
Please tell me fast what kind of installation (full opmanager) on windows server has to be done so that i can monitor services on that server. Or Does Opmanager gets installed by itself when i give the administrator password of that server to Opmanager?? Plz answer this fast..
No devices to add for common U/P under Quick Config Wiz
I'm trying to add a common U/P for my windows servers, but when I get to the point to choose what devices to apply this password to, the list is blank. I've got the devices for all the other Quick Config items, just not the Windows U/P one. I'm using 5.5 build 5510. Any ideas?
Availability Reports / UPS monitoring
Hi People Thanks so far for a great product. We're running tests atm to see whether it's mature enugh for live usage, and we have come across a number of issues. 1. Availability Reports. Strangely enough, the graphs showing the availability, is somehow wrong. Fx. the percentage for, let's say 7 days, show 99,96, but the bargraph shows only 3/4 filled. Other bargraphs also shows almos 100% filled, put has a percentage around 86. I looked at your demo, and I noticed that all your percentages was written
SNMP
I am running Opmanager 5.5 build 5510, I have the snmp service configured on my servers. When I try to confirm a device, I keep get the error "Please check whether the device is SNMP enabled and check the community strings. Everything looks good on my end, can you please help?
Device Support
We just bought OpManager and I am setting up my devices. I have a couple of devices that I'd like to get data/graphs from. Avocent KVM switch DSR2010 Brocade Silkworm fiberswitch NetApp F740 Filer It would be cool to see the fiberswitch in a similiar view to network switches with each port, etc... I have MIBs for these. Also, if I have WMI setup to monitor event logs on my windows servers is there any benefit of having SNMP setup too? Is there a difference between the two in what data you can get
Unable to scan certain subnets
I am testing out OpUtils build 3140. When using the IP Address Manager I am unable to scan a subnet of 10.11.183.32 (mask = 255.255.255.224). OpUtils gives me the error �Please enter a valid subnet address not IP address.� I believe this is a valid subnet address. How can I get the software to scan this range?
hide unmonitored interfaces from cust view
Hi, Is there anyway to hide interfaces from customer view? I can see the value to have inactive interfaces such as inventory needs. However, I would like to be able to simplify the customer(read only) view so they will not get confused by those extra "noise"... Thanks, Min
Windows DHCP Server false alarm
I have a Win2K server running a DHCP Server. I add the corresponding Windows Service Monitor, but opmanager tell me the service is down. Though, the service is running (and working) any idea ?
Several questions... remote agent, downtime, admin rights
Are there remote agents or do you have plans to include remote agents in the future? Is there a way to schedule down-time by network (ip range)? Are there supposed to be functions only "admin" can do? I have a user account with full access, but can't add a down-time schedule. Thanks in advance, JP
Features for the upcoming release - OpUtils 3.2
The following features and enhancements are planned for the next release(3.2) of OpUtils, which is expected to be released in Mid-July, 2005. 1. Port Scanner - A new tool to scan the tcp ports of a given device - Ability to scan multiple ports - Options to mark known services and ports2. Switch Port Mapper Enhancements - Ability to add multiple switch inputs - Retrieves VLAN IDs of Cisco Switches and appends with the community string internally - Ability to schedule the tool to run at specified time.3.
WindowsXP
Does OpUtils support WindowsXP ? When this is installed on WindowsXP, is trouble caused ? Thanks, Jiro
Found a bug?
I have a router being monitored by opmanager, or should i say i used to have it being monitored. I made the mistake of setting the monitoring interval to 0 minutes, and instead of giving me an error, it now says "unable to find the object : followed by the router's address", when i try to go to the snapshot page. If i search for the router, it is still listed, so i can not add it again. Is there any way to recover this device, or remove it and add it again?
Scanning other ip range
Please help to Scann other ip range or atleast integrate results of two opmanger server into one !
What's the difference between...
...a "standalone" URL monitor and a URL monitor attached to a server? Can I assign a notification profile to a "standalone" URL monitor? thanks a lot, alec
URL monitor bug?
I can add a "standalone" URL monitor called "www.mysite.net", but when I come to edit it, OpManager says that my monitor name contains special characters. It's the periods that are causing the problem. alec
Network views
Hi, I have added three servers in the xxx.yyy.zzz.224/28 network, but the network itself doesn't show up in the list of Network Views. Also, the Java client (which does show the network) shows it up as "unmanaged" despite the presence of the three servers. Don't know what's going on! :) thanks a lot, alec
Network Discovery bug?
Hi, I'm trying to auto-discover a network 192.168.12.192/27 so I enter "192.168.12.192" in the "Network IP" field, and select "255.255.255.224" as the subnet mask. When I hit "Add Network" it says "Please enter a valid Network Address". 192.168.12.192 bitwise ANDed with 255.255.255.224 equals 192.168.12.192, so it is a valid network address. Why can't I enter it? It seems a zero is required in the last octet for it to be accepted. many thanks, alec
Next Page