Report
Hello, Is-it possible to get a pdf report (cpu, memory) for a server selection (not all server in the database) ? Thanks. Rgds, Romain
Opmanger installation for Windows Service start/stop
Please tell me fast what kind of installation (full opmanager) on windows server has to be done so that i can monitor services on that server. Or Does Opmanager gets installed by itself when i give the administrator password of that server to Opmanager?? Plz answer this fast..
No devices to add for common U/P under Quick Config Wiz
I'm trying to add a common U/P for my windows servers, but when I get to the point to choose what devices to apply this password to, the list is blank. I've got the devices for all the other Quick Config items, just not the Windows U/P one. I'm using 5.5 build 5510. Any ideas?
Availability Reports / UPS monitoring
Hi People Thanks so far for a great product. We're running tests atm to see whether it's mature enugh for live usage, and we have come across a number of issues. 1. Availability Reports. Strangely enough, the graphs showing the availability, is somehow wrong. Fx. the percentage for, let's say 7 days, show 99,96, but the bargraph shows only 3/4 filled. Other bargraphs also shows almos 100% filled, put has a percentage around 86. I looked at your demo, and I noticed that all your percentages was written
SNMP
I am running Opmanager 5.5 build 5510, I have the snmp service configured on my servers. When I try to confirm a device, I keep get the error "Please check whether the device is SNMP enabled and check the community strings. Everything looks good on my end, can you please help?
Device Support
We just bought OpManager and I am setting up my devices. I have a couple of devices that I'd like to get data/graphs from. Avocent KVM switch DSR2010 Brocade Silkworm fiberswitch NetApp F740 Filer It would be cool to see the fiberswitch in a similiar view to network switches with each port, etc... I have MIBs for these. Also, if I have WMI setup to monitor event logs on my windows servers is there any benefit of having SNMP setup too? Is there a difference between the two in what data you can get
Unable to scan certain subnets
I am testing out OpUtils build 3140. When using the IP Address Manager I am unable to scan a subnet of 10.11.183.32 (mask = 255.255.255.224). OpUtils gives me the error �Please enter a valid subnet address not IP address.� I believe this is a valid subnet address. How can I get the software to scan this range?
hide unmonitored interfaces from cust view
Hi, Is there anyway to hide interfaces from customer view? I can see the value to have inactive interfaces such as inventory needs. However, I would like to be able to simplify the customer(read only) view so they will not get confused by those extra "noise"... Thanks, Min
Windows DHCP Server false alarm
I have a Win2K server running a DHCP Server. I add the corresponding Windows Service Monitor, but opmanager tell me the service is down. Though, the service is running (and working) any idea ?
Several questions... remote agent, downtime, admin rights
Are there remote agents or do you have plans to include remote agents in the future? Is there a way to schedule down-time by network (ip range)? Are there supposed to be functions only "admin" can do? I have a user account with full access, but can't add a down-time schedule. Thanks in advance, JP
Features for the upcoming release - OpUtils 3.2
The following features and enhancements are planned for the next release(3.2) of OpUtils, which is expected to be released in Mid-July, 2005. 1. Port Scanner - A new tool to scan the tcp ports of a given device - Ability to scan multiple ports - Options to mark known services and ports2. Switch Port Mapper Enhancements - Ability to add multiple switch inputs - Retrieves VLAN IDs of Cisco Switches and appends with the community string internally - Ability to schedule the tool to run at specified time.3.
WindowsXP
Does OpUtils support WindowsXP ? When this is installed on WindowsXP, is trouble caused ? Thanks, Jiro
Found a bug?
I have a router being monitored by opmanager, or should i say i used to have it being monitored. I made the mistake of setting the monitoring interval to 0 minutes, and instead of giving me an error, it now says "unable to find the object : followed by the router's address", when i try to go to the snapshot page. If i search for the router, it is still listed, so i can not add it again. Is there any way to recover this device, or remove it and add it again?
Scanning other ip range
Please help to Scann other ip range or atleast integrate results of two opmanger server into one !
What's the difference between...
...a "standalone" URL monitor and a URL monitor attached to a server? Can I assign a notification profile to a "standalone" URL monitor? thanks a lot, alec
URL monitor bug?
I can add a "standalone" URL monitor called "www.mysite.net", but when I come to edit it, OpManager says that my monitor name contains special characters. It's the periods that are causing the problem. alec
Network views
Hi, I have added three servers in the xxx.yyy.zzz.224/28 network, but the network itself doesn't show up in the list of Network Views. Also, the Java client (which does show the network) shows it up as "unmanaged" despite the presence of the three servers. Don't know what's going on! :) thanks a lot, alec
Network Discovery bug?
Hi, I'm trying to auto-discover a network 192.168.12.192/27 so I enter "192.168.12.192" in the "Network IP" field, and select "255.255.255.224" as the subnet mask. When I hit "Add Network" it says "Please enter a valid Network Address". 192.168.12.192 bitwise ANDed with 255.255.255.224 equals 192.168.12.192, so it is a valid network address. Why can't I enter it? It seems a zero is required in the last octet for it to be accepted. many thanks, alec
Can you install the Java Client on another machine?
...if so, how do you do it? many thanks, alec
Wrong message format
Hello, Could you please check the following message that I have received. I have some strange letters there. But when I use MIB browser I get correct messages. Alarm Details Source 10.243.176.65 Severity Critical Last Updated lip 28,2005 01:00:24 PM Message Trap received from wpp_agent with .1.3.6.1.4.1.193.83.1.1.1.1.122: 1050452129, .1.3.6.1.4.1.193.83.1.1.1.2.122: pmMeasJob Meas_sgsn_mm12_04, .1.3.6.1.4.1.193.83.1.1.1.3.122: � + , .1 Thank you! Br, Ivo
Problem when monitoring CPU on AIX server
Hello ! I monitor the CPU of my AIX 5L server with the HOSTRESSOURCE mib. It works fine, but the problem is that I have always the same value : -2147483648 I think this is a confusion between signed and not signed integer ... somebody know this problem ? Any suggestion ? Thank you
User traps & critical status
Whenever I send a user defined trap from my server it sets the status to critical. Is there any way to configure the status according to the message that is received? Some of our messages are critical but some are more informative & diagnostic coming before critical alarms need to be tripped. Thank you. John
Monitor CPU and Memory and Disk for HP UX
Dear Sir, Can OpManager monitor the above devices for HP-UX?
availability report
hi, can you tell me how to export availability reports in to Excel Thanks Dushan
Integration of MS Exchange 5.5
Hi, I m facing problem while monitoring Exchange 5.5 Service like MTA, IMS other key services of Ms Exchange 5.5 throu OP Manager 5.5. Pls. help me to get this probem resolved
event log detail
for some reason im not getting my event log alert details. this is what i get ID=65535 Source=CCIAVL1SAT Type=1 Message= does anyone have any idea on this
Difference between Professional Edition and Free Edition
I think a difference between Professional Edition and Free Edition is only we can use auto-discovery or not. Is there any other differences? This is a message we can see when installing OpManager. -Professioanal Edition (30 days trial -Free Edition (Monitor upto 10 nodes
Network Traffic
Hi, I was just wondering how much overhead traffic OpManager would add to my network of about 200 machines if they were all being monitored. It seems like there may be potential for problems with the amount of traffic it causes. Thanks
Cisco Interface
Test results I am getting following arror during test monitor. The Monitor did not respond to the test request Summary Device Name 192.168.5.254 Monitor Name etherStatsPkts Protocol SNMP OID .1.3.6.1.2.1.16.1.1.1.5 The Monitor did not respond to the test request Summary Device Name 192.168.5.254 Monitor Name etherStatsBroadcastPkts Protocol SNMP OID .1.3.6.1.2.1.16.1.1.1.6 Please help me to solve the problem With regards Ashutosh
Error after service pack 1 installation
Hi I have OpManager 5.5 build 5004 running on Red hat Linux. I have updated the service pack 1 according to your instructions. Aftrer successfull updation the OpManager fail to start with the following error. PM error in initialising classes in Topoilogy module PM aborting server startup Pl help
cisco configuration
please assist how to configure the cisco router
How long is data kept for?
Hi, I only seem to be able to show bandwidth etc. graphs for a router for the last 30 days. Can I go further back in time than this? I need to be able to do long-term trending (up to about a year's worth of data). many thanks, alec
Ping time out
Hi We have recently purchased OpManager 5.5 and installed. It ihas not identified D-Link 1750 routers as routers and had to manually configure. Mopreover the second hop routers are shown as criitical even though they are available. The ping delay is morethan 2 secs for those routers. How can I increase ping delay in Opmanager? Please help me to configure D-Link 1750 router to be managed from OpManager. Sivakumar AT IAF
Win 9x
Can i get details of Win 9x machines through wmi . The support is updated for service desk plus. Can opmanager get details of 9x machines and NT machines?
Web INterface remote edition
Web INterface urls become unclickable after a while. also im having discovery problem with my routers it worked fine in the regular opmanager but not in remote edition.
Ability to send SNMP Trap or syslog as Notification
Hello, I have a quick question about Notification. We have a Manager of Manager type environment and we have installed demo of Opmanager 5.5 build 5510. The master events collector can receive events in the format of SNMP traps or syslog. 1) Does opmanager have the ability to send SNMP traps or Syslog messages for exceptions instead of just being able to send emails? 2) Does Opmanager have a logfile where all the alarms are written to, that we can tail and then send to our events manager ? Thanks
Unable to test connection for desktops
Whenever I try to test the connection for a desktop on my network, I receive the error message "The Monitor did not respond to the test request." I tried putting in the Username and Password for the PC, but that didn't work either. Am I doing something wrong or am I unable to connect to those PC's? I like what I've seen of the product so far, it'd just be a shame if I couldn't monitor individual workstations. The workstation I'm targeting is a Compaq that is running Windows 2000. Thanks
problems with trap processor
If I sent a SNMP trap without trap processor, I see it on the Unsolicited traps window. After creating the relative trap processor, I cannot see anymore the trap on the unsolicited window but I cannot see it neither on the alarm list. Generic type: enterprise specific (6); Specific type:1; Enterprise OID: .1.3.6.1.4.1.10972.1.1.2
URL monitoring of an SSL site?
During our eval, we have not been able to get OpManager5.5 to "Check Now" an SSL site, it returns Host Unavailable. I can monitor a non ssl site by using http:// though. The documentation mentions https in the get/post operations but nothing further. Any URL monitoring we would of done would be https. Also wondering, can this follow redirect return statuses?
PIX discovery Issues with Opmanger
I'm doing eval on OpsManager. Got 3 issues: 1. When I discoverd a PIX 515, it was discovered as desktop. I move it to Firewall manually, but the view won't display the firewall. It says 1 item but no icon or info. I can move it to switch or router category and it does show up, just not as a firewall. Annoying. 2. When I tried to add another network segment, it says "network already in database", but I can't see it in network views. How do I add a network already discovered? 3. In my PIX 515 detail
Next Page