Errors with my profiles
Hello all, I have a problem with profiles notification, for example after create one I want to edit it. When I click on edit in the notification profiles page, the webbrowser show me up errors which should be debug or not. (see the screenshot attached) I have already delete and recreate several of these profiles but I get always the same errors (see the screenshot). Thanks for yours answers.
Notification when Device comes back online
Is is possible to generate a notification when a device comes back online? Thanks, Chris
Dell PowerEdge MIB's
Hi Folks. We've been using opmanager for awhile and are having good results so far. Recently we have had some issues trying to get Dell MIBs to work. We create a custom monitor and it looks to us as though the Dell MIBs are "restricted" in terms of what we can check for. Any of the sections we really want to check (disk array failures, controller failures, etc) are not available when we drill down through the tree. Has anyone gotten this working with OpManager? Thanks for your help! --james
effective load average monitor
I'm working on trying to get an effective Load Average monitor working in OpManager. I did email support but the answer they sent back indicated they didn't really read my questions. Here are the relevant entries from my conf files. My command line works. If I run this command line on a Linux hosts, it gives me back correct looking output. If I run this through OpManager, I get unexpected output and nothing gets graphed. The gist of this is I'm trying to come up with a metric based on Load Average
Wrong IF names/numbers with Opmanager 5.5
We are testing OPmanager 5.5 and notice that the interface-Numbers/Names are wrong. If Opmanager queries an Fortigate he never get the internal interface and mix up if-names and the coresponding ports. So you end up with an interface wan2 with is the port wan1 and so on. Any ideas what there is going wrong ? 3 wan2 10 IF-xxx.xxx.xxx .... NA NA NA NA NA 4 dmz 105 IF-192.168.28.... NA NA NA NA NA 5 modem 0 IF-192.168.123... NA NA NA NA NA The FG60 has 5 Interfaces with Names Internal wan1 wan2 dmz
Exchange Info Store shows N/A Disk usage
I've seen similar problems on here but the recommended fixes havent worked for me. Whats happening is most of the monitors for the exchange addon work fine except for the Information Store, in particular interest to me is the Disk Space monitors. The disk space monitors say n/a. However, alot of the other features of the addon work. I tried running a command called wmiadap /f or something like that but still nothing.
Discovery
Discovery is detecting Cisco 3550 catalysts as Cisco 3100 or 3200 systems. SNMP is enabled. The default device database does include 3550 mibs. What is the problem?
no graph
HI there, I have most custom graphs working fine but two cannot find out why.. When testing from the test monitor button it works fine.... Monitor Name AN50SIN Protocol SNMP OID .1.3.6.1.4.1.10728.2.16.3.3.4.0 Monitor value 30 Units Has anyone had the some problem When using custom graphs
HP Laserjet MIB
Tyring to load a MIB into the tool but it errors telling me that it can't Parse the MIB. I'll attach it here with a .txt extension. I would like to simply be able to use SNMP to see the device status.
Escalation Email Rules & Email Profiles on LINUX
I've recently installed OpManager 5.6 on a Red Hat 9.0 server. I've encountered issues with Notifications & Escalations. I've created several Email Profile for Notifications but when I go back to edit any one of them, the screen just says "Error!" instead of showing the form to edit a profile. ALso when I attempt to edit an Alarm Escalation Rule, the browser reports that runtime error has occurred in line 1539 with the error: Object expected. If I change the To Email Address and click Save then go
Alerts!
Can we use the manageengine to send alerts to mobile or email the alerts if something goes wrong with the server like server is running out of space or some device is not responding. I am trialing the software as I downloaded it today.
Disabling Auto Discover
Hi I have done a subnet discovery, and kept the devices i want, and removed the ones i dont want (eg deleted the desktops, i dont want to manage these with OM). Is there a way to turn off automatic rediscovery - the maximum value is 15 days, I dont want the deleted devices re-appearing Deleting the subnet from discovery settings deletes all nodes in that subnet, so that wont work THanks Dave
Opmanager and Event Analyzer
Is anyone running Event Analyzer and Opmanager on the same machine? If I get Event Analyzer started then Opmanager seems to stop and Visa Versa.
Create Multiple Hard Drive Monitors?
Lets say I have two servers. The one is a fileserver, the other is a web server. The fileserver quickly adds files b/c people are constantly uploading files to it. The second doesn't. I can let the web server sit until it is 90% full before I have to even begin thinking about another array, but the fileserver I need to know about when it hits 75%. How do I create it so that both are tracked and not just one? Right now I have the WMI monitor set at 90%, but I also need it to be set at 75% for some
Opmanager and Event Manager
Is it possible to get event manager and op manager running on the same machine? when I get one working the other seems to stop.
Duplicate name in Partition Details of the Device (%) monito
Hello, I have a problem with this monitor. In my IBM AS/400 server I have implemented a IASP. x disk configured in my ASP and x disk in my IASP. The problem is, when i would add Partition Details of the Device (%) monitor, i have multi choices (partition) but ASP partition is named ASP and IASP partition is named ASP. If i check 2 ASP, I can see only 1. I delete and i can see the second. If i add 1 and after i want to add the second, I have this error that monitor already exist.
Fix for some DBfailed messages when Stats file is missing
Some posts note that OpManager won't start. A message that the DBFailed is displayed. This can happen after OpManager is restored from a backup. It is possible that one or more of the "stats" files which are part of the database were NOT backed up as they were open when the backup was made. Check the latest log files in <opmanager_installation>/logs one of which will list which DB "stats" files are missing. [try grep -i database *.log] To fix: A. Replace the missing "stats" file(s) by copying a working
Error that cant be cleared
I have an error on one of my servers and do not seem to be able to clear it: ID=4194 Source=COM+ Type=1 Message=The system has called a custom component and that component has failed and generated an exception. This indicates a problem with the custom component. Notify the de any ideas?
2 questions: remote client and archive reports..
I was wondering about two things recently: Is it possible to just install the client and point it to an opmanager server? The client has more functionality than the web client--such as creating and managing business views--and it is kind of cumbersome to have to remote control the opmanager server every time we need to perform those activities. Also, one we have a year's worth of data, how would one archive that data, yet still be able to report on it if necessary? The archiving of the db is easy
Switch Discovery
It takes 10-15 minutes to discover a layer 2 managed switch. Is that normal ?
opmanager loosing data
Hey guys we are using opmanager 5.6 on windows xp, how ever just recently we have been loosing data from our server monitoring? especially a linux boxes. Restarting opmanager fixes this. Regards
Brocade Fiberchannel Switch Custom Monitors
Can you guys help me setup some custom monitors for my Brocade Fiberchannel switch? I'd like to monitor port traffic and utilization via OpManager. Attached is the MIB. Thanks! Shawn
Service monitoring error
hi opmanager support, i have opmanager running currently in my network. one of my server is running smtp and surely http services...i've set my opmanager to monitor this service. then, my problem is..it keeps giving me an alarm that both service is down and when i check it at that particular server. the service is running fine. any idea?
Expand Monitors
Is there a way to have the monitors list expanded by default while viewing a device? If so, how do I go about setting it up? Thanks,
Business Views the device are display one on top on another
Suddenly in opmanager business view (in specific view of the client location), when I add a new device, all device are display one on top another. In the web client the device are display one on top another and In the apache client dont�appears the new device.
Load vendor mib
opmanager can not see speed of ports change on netgear gsm7224 switch correctly. I have vendor mib files. How do I use them to get opmanager to work correctly. How do I load them permanently and use them to add the switch and watch the ports everytime opmanager loads.
Adding maps to Business view
I am trying to add a map to business view so it can be selected. I saved a map of my city from mapquest as a jpg and placed it into the images/maps folder but cannot see it to select it. I have placed it in other location and tried browsing there when selecting "change background image" on the maps page but the file isn't being seen. I also stopped and restarted the service. Why won't the regular client, not the web client, see the map so I can select it? thanks;
Notification Profile
Dear support, We are having problems adding a new notification profile. When we first added a new "run program" notification profile, we did not provide the correct string for the location of the vbscript, we forgot one subdir in the string. Since then we are not able add new notification profiles. Also the one we added in the wrong way won't go away with the delete button, although it displays the message "notification profile added/removed succesfully" but no new notifications appear on the list.
Cannot show interface
Hi, I need to monitor some Linux server. The SNMP already enabled. I can view the CPU/Mem/Disk usage. But cannot view the LAN card interface. How to fix it? Sam. Example: Index Description Speed Status Display Name ...... 0 0 IF-172.16.4.88 NA NA NA NA NA
Cannot add D-LINK switch inside switch
I cannot add the d-link gigbit switch and it not display my port status
Cisco 1700 routers not showing CPU utilization Clock
Hi While managing a couple of Cisco Routers, I noticed that my 2801 routers showed their CPU and memory utilization while checking them using the Web Client. When I tried to monitor a couple of 1700 series router, I can see the clocks in the MapMaker, but they do not show up in the Web Client. What is the problem with this???
Linux SNMP Details not being seen by OpManager?
Hi! I've successfully created some SNMP monitors for an XP machine and can view plenty of details including its disc, CPU and memory utilization etc. However for Linux machines it doesn't seem to be as straightforward. For example I downloaded & ran the AdventNet LinuxAgent (on RedHat Fedora 4) however OpManager wouldn't recognise the machine as being SNMP enabled - no blue star in map view. So having stopped the agent I tried starting up the system's own snmpd. Via the web client OpManager sees
Does not work at all
Hi, I really like to evaluate this product since we have only cisco switches and routers and it seems to be great. But nothing works. Event if I do a ping, it prints this: R�ponse de 127.0.0.1�: octets=20 temps<10 ms TTL=128 Statistiques Ping pour 127.0.0.1: Paquets�: envoy�s = 1, re�us = 1, perdus = 0 (perte 0%), Dur�e approximative des boucles en millisecondes�: minimum = 0ms, maximum = 0ms, moyenne = 0ms But the icon say: "System is not alive" ou "System doesn't exist". And when I try to do anything
the meter sometimes disappeared
dear, hi, i am using opmanager 5604. I'm using snmp for getting information of CPU, disk utilization, and memmory utilization. Sometimes, the graph of meter (meter picture) is disappeared, and sometimes it is show normally. When I try to browse the MIB of the server, there's no problem at all. Please help me, because the history graph of my server is being not accurate. Thank you.
switch mapper
Netgear gsm7224. Switch mapper says Bridge-mib not installed on switch. then a picture of a switch does display but not always correct and interface speed changes not noted
How to monitor the Oracle or SQL Server
Dear all I would like to know how to monitor the Oracle or SQL Server. (I cannot get the result when I tried to create the application monitor for both Oracle and SQL server) Thanks in advance Kwan
Linux SNMP Details Not Being Seen By OpManager?
Hi! I've successfully created some SNMP monitors for an XP machine and can view plenty of details including its disc, CPU and memory utilization etc. However for Linux machines it doesn't seem to be as straightforward. For example I downloaded & ran the AdventNet LinuxAgent (on RedHat Fedora 4) however OpManager wouldn't recognise the machine as being SNMP enabled (no blue star in map view). So having stopped the agent I tried starting up the system's own snmpd. OpManager sees this as an SNMP enabled
Device not visible - but registered in the database
I am trying to discover a new device (switch) which is not visbile in any of the views or inventories. The 'discover new device wizard' complains that it is already in the database ... how do I delete these records (if they exist) ... or how do I add this switch?
Netgear Switch
We have netgear gsm7224 switch. It does not show the interface port speeds correctly. What needs to be done. It has been rediscovered and re acquired multiple times. SNMP is working The port lights are green if occupied but the speed is not present and traffic is not seen.
MibBrowser load error
Can you please look at this MIB and tell me why I get a cannot load error, I have had the vendor send them to me 2 times and both times they will not load. Also is there a way I can fix mibs that error out like this?
Next Page