need to monitor bandwidth @ seconds level
Hello I have a requirement i.e to monitor bandwidth at the rate of seconds not minutes. Plz help me. Anil
Problem with high load
Hello. I installed opmanager about a week ago, and im currently monotoring 23 servers. For the resource monitor i use standard settings, i monitor cpu,memory and disks. On 2 of the servers the winmgmt.exe process hits 100% cpu usage when i add this servers to opmanager. If i disable snmp it stops and the servers goes fine. The dll file the winmgmt.exe are using is wbemcomn.dll and it�s the same file on both these servers, on the other servers i dont have this file? I checked the microsoft support
Problem in discovering Router 2651 interfaces
Hello all The OpManager has sucessfully discovered router 2651 on the network. It had discovered this router as a switch, hence i changed the device type to router. But the problem is that it does not display the router interfaces. Please let me know how this is to be done. Thanks swordfish667
Syntax error or access violation, message from server
Hi, Have downloaded and installed version 6005 of opmanager last week. I was adding a url monitor when the following error appeared : Syntax error or access violation, message from server: "You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 's 834DG Router_URL_Poll','10.0.0.252_Poll') ORDER BY Alert.MODT"; nested exception is: java.sql.SQLException: Syntax error or access violation, message from server: "You have an
!!!!problem with mssql monitoring
using mib browser ,i tried to monitor mssql2000 on a server that i already added snmp service and sqlserver agent . this is the result mssqlSrvTable : success mssqlSrvInfoTable : success mssqlSrvConfigParamTable : success mssqlSrvDeviceTable : success mssqlDbTable : NOT success !!! mssqlDbInfoTable : NOT success !!! mssqlDboptionTable : NOT success !!! mssqlDbDeviceTable : NOT success !!! In mssqlDbInfoTable that i seriously need to monitor ,i try to get an mssqlDbInfoDataSpace but it s not work
Export of Discovery Possible/Feature?
Atfer spending time setting up OM is it possible to Export Devices that we've edited and added monitors to? For me this is just plain Catastrophe management.
MSSQL to MYSQL Conversion
We have been having a lot of issues with MSSQL being the back end for OpManager. Is there any way to convert everything in it (I could live without the history, but not anything else) to a MYSQL database instead to see if it runs more reliably? Also, when using a MSSQL database the dbmaint and dbbackup utilities don't seem to work. Thanks
Disk Usage monitoring on Solaris through Telnet SSH
I've searched the forums and have found topics which are related, but don't seem to answer this question. I /think/ i have my snmpd.conf file set correctly, but still could not get snmp based monitoring to work. So I gave up, and went with telnet based monitoring. CPU/ Memory seem to work fine. Disk monitoring just shows all space as free. A big pink pie chart is all i see. This is incorrect. As mentioned, I am using the Telnet based disk usage monitor for Solaris. The test results come back good:
opmanager - no webserver connection shutting down
Hi. I see this has been discussed a number of times here, however nothing seems to actually fix the issue in my case. I am attempting to run opmanager-msp under Debian linux. After installation, running ./StartOpManagerServer.sh "Failed to establish connection with web server. Gracefully shutting down OpManager." occurrs. As per the troubleshooting, I have ensured that the correct libraries are installed, and running ./StartWebSvr.sh gives me: Exception in thread "main" java.lang.NoClassDefFoundError:
Opmanager for Windows cluster
How to add opmanager in windows2003 cluster resource
Stopping certain alerts
We have a client that has a server where the licence warning keeps appearing in OpManager and effectively putting a new job ticket into ServiceDesk+. e.g. "ID=202 Source=LicenseService Type=1 Message=The product Windows Server is out of licenses. Use Licensing from the Administrative Tools folder for more information on which users are out of complianc" Is there a way to ID these errors and only get one warning from OpManager, or is there a way for OpManager to not rate them as critical. If there
Business Views -- I want to add Infrastructure URL Monitors
I would really like the option to add a URL monitor to a Business View. For my purpose, it would give me a top level view of the availability of an application. I already have the servers, mainframe, switches, routers, etc. that are in use in making the application available. The infrastructure-based URL monitors would complete the business view. Thank you
Alarm Message with SNMP Data but no text
Is this an indication that I am missing a MIB? .1.3.6.1.4.1.9.2.9.3.1.1.162.1: 5, tcpConnState: 4, .1.3.6.1.4.1.9.2.6.1.1.5.10.0.10.1.23.10.0.10.60.2138: 17306, .1.3.6.1.4.1.9.2.6.1.1.1.10.0.10.1.23.10.0.10.60.2138: 125, .1.3.6.1.4.1.9.2.6.1.1.2. Thank you. -Eric.
Monitoring variable out of range
I have a problem that if any of my vars are not defined on a managed device, OpManager begins to poll other vars much slower (it almost stops). How can I fix such situation and send a notification?
Hardware specifications
Hi Guys, I am wondering if there is a way in Opmanager to get a Hardware/Software specification report for specific devices? This report would give me in detail, the # hard drives, RAM and processors in a specific device. I would like to do an inventory of the servers and hopefully this feature is available in Opmanager. Thanks.
The requested resource is not available.
HTTP Status 404 - /framework/EditSchedulerToolWise.jsp -------------------------------------------------------------------------------- type Status report message /framework/EditSchedulerToolWise.jsp description The requested resource (/framework/EditSchedulerToolWise.jsp) is not available. -------------------------------------------------------------------------------- Apache Tomcat/5.0.28 Help?
Can't Add item to Business View
for some reason I can't add a device to a business in Java. I enter properties. select and move the device over to the right pane but when I press ok it does not show up in the view. There are 15 devices in the view but I only see four in the propities right pane.
Event Log filtering error
Hi, We have made som changes to the eventlog monitoring. If we add a rule and choses to ignore the event it works. But if we add a rule and wishes to change the status from critical to attention it does not work. Geir
How can i stop alarms for "Administratively down"
Hi, I am using free version of Opmanager from last 02 months (for testing this software). I just want to know that if I make any interface of switch �Administratively down� for specific period of time then how I can stop alarms for that interface for that specific period. Same thing i want for some devices also. And I tried that �unmanaged� option also in the device detail web page. Please tell me what that exact functionality of it. Kindly guide me. Regards Trisha
Vista
Yes yes I know, beta, but has anyone tried it? I can't get the engine to stay started. The only error I have seen was something about the setting in the services logon that allows the service to interact with the desktop. The first error I saw says that was not allowed but I can't find the group policy that allows it. So I tried turning it off and the engine still quits.
All Server Disk Usage Report
The All Servers Disk Usage Report also shows results for desktops, not just servers. I think it is reporting any device that has Free Disk Space and Used Disk Space resource monitors enabled. It would be good if there were separate reports for desktops and servers.
Opening a ServiceDesk Ticke with OpManager Premium 6.0-6003
When I try to create a Log a Ticket Notification Profile, the Exchange and SQL Application Monitor selections are not present. How can I open a ServiceDesk plus helpdesk ticket with OpManager 6.0 Premium build 6003 when one of the Exchange features is in a failure state? Thank you. -Eric.
Service ManageEngine OpManager - Not installing
run OpManagerService.bat -i Result: 1 file(s) copied. 1 file(s) copied. 1 file(s) copied. 1 file(s) copied. New Port :: for the WEBCONTAINER_PORT ::::: 8011 New Port :: for the NMS_BE_PORT ::::: 2001 New Port :: for the TOMCAT_SHUTDOWNPORT ::::: 8005 New Port :: for the RMI_PORT ::::: 1100 ports {WEBCONTAINER_PORT=8011, NMS_BE_PORT=2001, WEBSERVER_PORT=8060, TOMCAT_SHUTDOWNPORT=8005, RMI_PORT=1100} portStr 8060 '".\wrapper.exe"' is not recognized as an internal or external command, operable program
OpManager 5.6 is here!
Hi All, Check out our latest release, OpManager 5.6 (Build 5600), and yes! with the much awaited 'Exchange Monitor' add-on! This release also brings a better user experience for those using other products from the ManageEngine Suite. From OpManager, you are just one click away to log onto ServiceDesk Plus or NetFlow Analyzer! Here are the release highlights so you know what to expect when you are on OpManager 5.6 1. Exchange 2000/2003 Server monitoring is now available as an add-on to OpManager!
Unable to trace the IP address for Netgear FSM726 Mngd Switc
Hello, am unable to trace the IP address for the Netgear Managed Swtich FSM726 & also am not able to view through console, what is the best possible way to configure the Netgear FSM726 Switch, pls advise me someone. Please reply me on shamyrad@gmail.com
Solutions given for router's Resource Monitor is not working
Hi, OPManager's free version is already running on my network from last 02 months (For testing purpose) and I added 18 devices in the OPManager and I am okay with all the monitors. When I entered IP address and SNMP community string in "Solarwinds" for one of my router the "CPU Utilization" and "Memory Utilization" monitors start working itself. But when I entered same IP address and SNMP community string in "OPManager" for the same router; It takes all the interface details itself but not showing
Issues I've Encountered...
Ok, first of all our company just purchased opmanager to monitor a total of around 250 workstations and 500 servers, plus 50 or so network devices. While configuring opmanager to monitor a meer 100 servers and 2 network devices, without anything really unusual I've encountered many things that were either far harder than they should have been, hidden and hard to find, or various other things I would just like to list out in the hopes of seeing them improve or be fixed in the next version. I have
Custom Monitors
Hi, is it possible to create a custom monitor to connect to the server using ssh or telnet rather than SNMP Thank you Ramzi
Netscreen 208
Hi, I have added a netscreen 208 firewall to monitor with opmanager ver 6. Opmanager is detecting the firewall device type correctly however it does not show all interfaces and vlans configured on the firewall. It only shows one interface which is connected to the internet. Do I have to enable anything on the firewall side. Thank you Ramzi
Create custom report on device response time via MySql
I'm running some ETL processes to pull utilization, availability and now need to get Response Time data for devices. What table and columns in OpManagerDB hold Response Time data? What Instance, Name should I be looking for? I've been trying to find in POLLEDDATA and AVAILABILITY_STATISTICS but can't seem to find it. Thanks for you help.
Exchange section - last polled value = N/A
From an earlier post: "Apparently the issue was, the hostname of this server wasn't in the host file, and OpManager was starting up using the name localhost. This worked ok for discovery, but apparently polling wanted the real name. The software is polling now correctly. " I have installed the probes onto a couple customer sites and they show as Exchange Server health = OK, but I am getting a number of N/A on the main Exchange dashboard in OM where there ought to be data (i.e. SMTP in) and no poll
Deleting several devices (desktop) ?
Dear all, Is there a way to delete several devices in the same time ? (including delete rows in DB if needed) We don't want anymore to monitor desktops. thanks for your answer, Christophe
Switch Port Mapper Problem
Hello, I am trying out OpUtils 4, I tried out 3.2 I liked it a lot 4 is a lot faster and seems more robust. One problem, we don't have routers in our network and before in OpUtils 3.2 I could use a server with SNMP enabled to instead of a router for better MAC address resolution and DNS resolution. However, now even though it says Router/Server (Optional) when I put the server in (same one I used in 3.2) it says Error: Not a Router. Is this just a bug? Thanks, Chad
Server Disk Usage Report Graphs Don't Display Correctly.
I have set it up so that myself and several other members of the tech. department at our company get emailed daily with disk usage reports. Each drive on each server is reported, and a graph appears showing simply and graphically how many is being used. Its very nice. You guys did a great job with this. The problem however is that some don't have green for the low usage or red for the high usage - in fact they only have the black outline and the white box, with no white or red at all. This makes
Error in downloading client files from BE
Is anyone getting this error that is using a remote SQL Server 2000 system. The database was created on the server but we have yet to get past that error. We have been unable to even demo the app.
OpManager eval - questions and problems...
Sorry this is so long-winded, but it�s easier than posting 20 different questions. Anyway. We�re evaluating OpManager (as well as NetFlow and Event Log Analyzer) and have run in to some problems/questions. I�ve poked around, read the forums and resolved quite a few, but still have some left. If anyone can offer any advice/tips/comments, I�d appreciate! 1) Is it possible to rename the network subnets listed under the Network Views? This is not terribly important, but it would be nice to be able to
The Monitor did not respond to the test request
Hi folks, I have OPManager 6005 running on Windows XP and a 3 Phase Powerware 9355 UPS . I want to setup monitoring of this UPS using OPManager. Because OPManager doesn't nativly support Powerware I planned to use "custom monitors". So I loaded a program called "MIB Browser" from ireasoning software house. I can successfully get info back from the UPS using this MIB browser. The OID's I'm really interested in are the "output current of each phase". So in the MIB browser if I enter the oid... .1.3.6.1.4.1.534.1.4.4.1.3.1
Event Log notifications
How do I configure Opmanager to email specific Windows Event Logs without raising an alarm on the server? I am trying to get notifications when users connect to my VPN server. Currently, I have created System rules with the RemoteAccess log IDs that I want to receive. However, the only method of notification I was able to get working, involves making the logs raise an Attention alarm. When I set the alarm to Clear or Ignore, I never get emails. Is there any way to get the emailed copies of the logs,
Better Scheduling.
When can we expect more customizable reporting? For example, why does it have to be Top N reports? For example, with disk usage I would like it to organize them by server, rather than showing me them by percentage used, etc. David.
Objects re-classify themselves.
I am running the latest version of OpManager, and every once in a while, a device will disappear, or get reassigned to a different catagory. For example, I have a domain controller that showed up in the desktop catagory today. Also, I have added and deleted some devices, then added them again. Once they are re-added, not all snmp monitors work that did previously. What's going on?
Next Page