Device Template for Nexus 9K
Hi, I'm after a device template to add some Nexus 9000 series devices to our OpManager Monitoring. I see there's some 5k, 6k and 7k templates but no 9k. Any help would be appreciated. Cheers
Monitoring Memory
Hi everyone, I have OpManage 12 in my organization. I wanted to know if "Memory Usage" monitors the page file . Regards :-)
CCTV View
I have created CCTV view within OpManager and now that is all I can see. How do I go back to the standard view to be able to manage the environment?
Two credentials one device
I have a Server with a UPS attached by USB. The server uses port 161 and the UPS 163. I have setup credentials for both with the different ports but it seems I can only associate one credential per device. You can only have 1 device per IP address. Any suggestions how I can use traps and monitors for the UPS and the Server? Regards, Phil
monitoring BGP peers
Hello How can I monitor and set opmanager to alert if a bgp peer goes down?
Opmanager v12 - Partition Details of the Device (%) Not Show Removable Storage Drive (USB-Drive)
I use Opmanager v12, I want to monitor my Windows workstations harddisk drive and removable storage drive (USB-Drive) via SNMP The monitor only show harddisk drive partition but not USB-Drive. Thus, how can I do that? Any suggestion, appreciate. Tom
SNMP Discover device interfaces of private oid automatically
Hi, a relay status is defined in my private mib which is .1.3.6.1.4.16535.4.1.1.3.1 ,the mib is import into opmanager successufully and I can create a monitor to access the value of the relay staus which value is zero or one. Is it fesible to add this oid under interfaces automatically when discovering the device under MonitorDevice tab of the browser? and how to do that. Thaks
Using NetApp API (ONTAPI) for NetApp Discovery
Hello experts, Recently I have been evaluating OpManager and I am quite stuck at the new feature for storage server monitoring. I am planning to monitor 2 versions of NetApp storage, 7-mode and cDot, and I have prepared the lab environment accordingly. I have successfully discovered these 2 versions successfully using SNMP (granted there are some problems with the data in cDot, albeit minor), but I cannot seem to perform discovery using NetApp API (ONTAPI). Within the NetApp console, I configured
Device Snapshot Page - Inconsistent Default and Custom Dial Positions
Hi, I noticed that the Default and Custom dials in Device Snapshot page have inconsistent page positions depending on what data is associated with that device, i.e, Router / Router with NetFlow / Router with NetFlow and NCM (See screenshots attached. All three routers have the same Device Snapshot dials and widgets so it doesn't make sense why the positioning is inconsistent between them. I am running version 12.3.119.
SMPP Support
Hi, does OpManager support the SMPP protocol at all? We have an SMS server we would like to use if possible so we can retire the old phone we're currently using as a modem. Thanks Justin
More compatibility issues
Hi all, I am getting yet more compatibility issues with OPMan and it is starting to become very frustrating. Last week I had to upgrade to the latest version because of Flash Compatibility issues with Business Views of Maps and now, I've noticed a scroll bar has appeared on the right hand side of the view when I'm looking at a device. This occurs no matter what browser I'm using - see attached image. Can you please advise?
SNMP vs WMI
We are using Windows Server 2016, and thinking about moving to Linux. Will moving to Linux improve OpManager performance? At the moment, OpManager is very slow, even though we have increase the maximum memory OpManager can handle. What are the benefit of SNMP over WMI?
Printer
does any one know if you can check ink levels, heat , cpu of printer through snmp on OPmanager or recomend any other service thanks
new patch of opmanager
Hello Please give link to new opmanager patch. I see that you have made alot of changes that would fix alot of problems I am having.
How we receiving the SNMP V3 Trap in ManageEngine
Hi , We have Cisco ISR router with following configure for the SNMP v3 trap Configuration details 1, Snmp version:V3 2.Security level: Authentication with privacy 3.User name 4.Authenticaion password,protocol 5.privacy protocol with password But we did not know how to receive the SNMP V3 trap into Manage Engine. So please share way to receiving the SNMP v3 trap from Cisco ISR Router in Manage Engine dash board. Regards, Jay Kumar
How we receiving the SNMP V3 Trap in ManageEngine
Hi , We have Cisco ISR router with following configure for the SNMP v3 trap Configuration details 1, Snmp version:V3 2.Security level: Authentication with privacy 3.User name 4.Authenticaion password,protocol 5.privacy protocol with password But we did not know how to receive the SNMP V3 trap into Manage Engine. So please share way to receiving the SNMP v3 trap in Manage Engine dash board. Regards, Jay Kumar
Continuous alerts via email
Is it possible to have continuous email alerts for a specific process monitor? When I searched for the topic in these forums, the only response I found was 12 years ago, and this feature was in the works.
Opmanager esxi graph performance
Hello! I have tested Opmanager 12.3, and add vcenter appliance (which consist 5-6 esxi host). But, now when I go to GRAPHs page to se graphs performance, I don't see anything... All graph, like CPU Utilization [VIWebService] show data Data not available . How I can configure collect performance information from vcenter and see this on graph ?
OPM v12200 Downtime Schedule without registers
Hi, I have the version 12200 in OpManager and recently I disabled a downtime schedule and when I done clic in save all the others records disappeared. After that if I want add a new one I can do it but does not showed the new record. This is an example about the register of a new one downtime schedule. When I do click on Save send the message that the new record was successful but this one does not appear in the list view. Thanks & Regards! A
ManageEngine User Conference 2018 @ Pleasanton
Join us in Pleasanton for 2 days of intensive training, and fun networking: ManageEngine User Conference 2018 is here! We'd love to host you at our Pleasanton office for the ManageEngine User Conference and Training on the 23rd and 24th of May. It's going to be two action-packed days designed to help you get more out of your ManageEngine experience - with a track completely dedicated to IT Operations Management. Click here to check out all the details. What's in it for you: Talk to our experts
script function to reduce labor effort
Hi, I am using OPManager Probe in remote site and I need to create different notification rules, CI records in different probes. I am looking easy way to create these records in every probe system. for example, can I use API to add / update / delete CI, notification and others records in probe? If I can do it, how to get these API information for script development? Or does anyone have complete this development, is it possible you can share your experience with me? Thank you very much!
SNMP V3 Trap for Mulitple device support
Hi, I am Jay Kumar from Bangalore.We want details regarding the SNMP V3 Trap Support in the Manage Engine. We surfing in the internet and found Manage Engine online demo but we didnot find any SNMP V3 Trap configuration.So please Share how we configuration SNMP TRAP processor in Manage Engine with SNMP V3 Support. We have Many network device with V3 Trap Configuaration like username,Password,Authentication Protocol,password and Privacy protocol and password. Our question is Manage Engine didnot
Quick Scheduled Reports
Hi, In the previous version, You could add a quick scheduled report from the interfaces screen (right top). now i cant.
OpManager data incorrect (CPU Memory etc)
Hi I have been using OpManager at the place I work for about 2 and a half years. I used to love this software... but as I have used it more and more, I am seeing some MAJOR problems... If any of this is based on improper usage, please let me know. I feel that In this past 5-6 months I have seen OpManager decline in quality. This is making OpManager unusable because we cannot trust the data OpManager is reporting... Here are some of the problems we have started experiencing. We have read through the
Attn: Version 11.6 customers
Hi All, We know that it has been a long time since the version 12.0 and the service pack to upgrade to 12.2 was released. Some of you might have tried version 12.0 and decided to stay in version 11.6 due to UI glitches and the different UI navigation. Some of you may already ungraded to version 12.0 but would prefer to use the old UI. This post is especially for you. 1)Now you can directly upgrade your 11.6 OpManager to 12.3.094 build bypassing 12.2 and 12.3 service packs. We have come up with a
Linux CLI monitoring
I cannot get Linux CLI monitoring to work. when i add a device via CLI it shows up as Unknown and does not let me add monitors, if i manually set Type and Vendor for the added machine i can then add monitors and they work however once rediscovery happens it resets to unknown. How can i get a device monitor by CLI to show up as Server, Linux. I do not have or want to use SNMP i want to use Linux CLI.
Nexus Hardware Sensors
There is no hardware information for Nexus Switches (Powesupply, fan, temperature, other sensors). Is it planned to integrate this,because it is a very importnt feature to most of our customers. Kind Regards Stefan
Patch which allows removal of unused modules
Hi, How do current 12.3.x users get the patch which described in https://pitstop.manageengine.com/portal/community/topic/attn-version-11-6-customers allows removal of unused modules. The maximum I can seem to get is 12.3.086 but it states 12.3.090 and above has this feature. Thanks
Business View
Hi, We have a view of all our sites and they show as green, amber or red - depending on the issue. Recently I added extra devices to a few of the sites but when they alert and change colour within the view, they don't change colour on the main screen (see attached). Additionally, the Business View on the home page used to show the entire map of all our sites but now it cuts off the bottom half of the map - is there any way to fix this (also attached)?
Inventory Alert for Add/Remove of machines
Good afternoon, i have been asked to keep an eye on how many machines are being added/removed from our opmanager on a daily basis. Is it possible to setup a notification for when a machine is added to the monitoring either manually or automatically during scan? We are a Hyper-V house and we have certain teams that seem to be creating VM's on an hourly basis. i need to be told when Opmanager starts monitoring them. Many thanks
redo Opmanager from scratch
Hello Community, We would like to redo our OpManager server from scratch (v12 with MSSQL) and come back to the bundle version with embedded DB. BUT to do that we need to backup firstly the CONFIG (i mean all servers, objects, network device and their monitoring, the inventory in fact but WITHOUT the traces, events,... etc... and w/o the database which is dirty androtten after A LOT of update from v8 to v12...:) ) In the old version there were 2 different types of backup : backup DB w/ or w/o config
Unable to Register Probe to Central Server v.12.3.091
Support, I am trying to install a OpManager Probe Server but I am running into issues. Our Central Server is running OpManager version 12.3.091. Scenario 1: Probe version 12.200 is unable to register to Central version 12.3.091. Scenario 2: Probe version 12.3.119 (Latest Probe Version) is unable to register to Central version 12.3.091. Note: In both cases, the install immediately terminates without finishing. The OpManager Home directory and sub-directories are copied to the drive but the ManageEngine
[Free Training] Network Monitoring & Management with OpManager
Hey everyone, We're back again with yet another series of free OpManager training sessions! If you are new to OpManager or if you have missed our previous training sessions, now would be a great time to register for this free training. We have revamped our content to include more use-cases and covered our frequently asked customer questions in this training. So make sure to attend this session to get the most out of OpManager. Our five-part training series covers every OpManager module in detail. Reserve
Simple code for triggering threshold condition
Hi, I'm new to opmanager and am trying to understand the workings of the custom scripts feature. I tried to write a simple script for triggering the threshold condition, but it doesn't seem to work. I'm not sure what needs to be done exactly. Could someone point me in the right direction? Note: The website won't let me post the images, so here is the sample code. Also, the threshold value is 3 and the first trigger is set to go off when the current value = threshold value = 3. Command Line: cmd /c
OP Manager locks my Active Directory account
Since upgrading to 12.3.000 and then 12.3.070, OP manager keeps locking my AD account every hour. My user account is not used in the credentials repository, there are no windows services running under my credentials, no windows scheduled tasks. I queried the database (select * from hrdetails), my credentials are not mentioned. I have gone through every configuration without any success. I know it is OP manager because if I stop the service, my account no longer locks out. Any help would be appreciated.
Network Configuration Manager SSH Connection Error
Hi, I am trying to configure NCM to connect to a Cisco 2960 Switche via SSH however when I test Credential it shows me that not even the 22 port is open. When I see the logging on the Switch says the following error: SSH2 1: no matching mac found: client server hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96 Is there a way to configure the ssh client that ncm use to connect to the switch? or how NCM configuration works for Cisco Switches Connections Note: I can successfull connect Via Putty to that
Edit format of notification email template
Apologies if this is asked in another thread as all I found pertained to SDP. Other than using variables, is there a way to change the layout/format of the email template? The message setting is duplicated below that section. Would like to be able to change the layout as desired.
OpManager User Conference and Training in Sydney and Melbourne!
We're happy to invite you to the OpManager User Conference and Training at Sydney and Melbourne between April 30th and May 4th. [Register now] This two-day event full of in-depth and intensive technical training will help you make IT management simple, fast, and efficient—and we've got sessions focussed exclusively on OpManager. Trust me, you don't want to miss it! Here's what you can do there: Discover the latest ITOM trends, watch live product demos, and get a sneak peek of our product roadmaps.
Windows Server 2016 Datacenter Edition Sysoid
Has anyone been able to get the SysOID for Windows Server 2016 Datacenter Edition? Need to get a template created for all the Windows 2016 versions too.
Auto Logon vs. pass-through
Hi I do not understand the difference between "enable Auto Login" feature and the Pass-through feature. Could you please explain?
Next Page