MS Exchange 2007 Cluster monitoring fails
Dear support, We are running MS Exchange 2007 SCC on Windows 2008 Failover cluster. Individual nodes are working fine with OpManager but resource monitor can't get the information from Exchange Cluster. Any suggestions?
Error after installing manage engine
I just installed Manage Engine OpManager to test it out and during the installation I was prompted that port 80 was already in use and was asked to specify an alternate port. Port 8060 was recommended. I accepted the recommended alternate port and rebooted but now when I try to access the web portal (http://localhost:8060/LoginPage.do) I get an "500 Internal Server Error" and a message to check the server logs. Checking the server logs I see the following errors in the TomCat logs: [Sat Oct 17 00:44:31
Opmanager Multi - Catagorize
Hi there, I have added a whole subnet of servers/network devices to my opmanager install and it has dumped most if not all of them into the 'Desktops' Catagorey I have had a hunt around but cannot find a way to mass move them into the servers catagorey other than manually opening each device and changing it from Desktop to Server Is there an easier way to do this?
Creating a 2nd operational Server Infrastructure View.
Hello, Opmanager Build number 7100 (Windows) We are monitoring so many Windows Servers that I would like to start creating additional Infrastructure Views to separate them, instead of all of them being in the Server View. Whenever I try to make a new Infrastructure View (for example "Servers 2) the functionality of any device i place in the new View is very limited. You cannot configure it like you could if it were in the built in Server Infrastructure View. Is what I'm trying to do not possible?
Change Syslog Protocol From UDP to TCP
How TO change OpManager Syslog Configuration Protocol from UDP to TCP. For Receive or view Syslog Message From TCP Portocol ??? I have send my syslog message by TCP protocol to OpManager syslog server And view from SyslogViewer.
OpManager
License Type : Professional Build Number : 8007 Expires on : Never Maximum no of Devices : Unlimited Hello, I was wondering a couple of things: 1. Is there a way to include the IP of a device being monitored in the notifications that get sent from OpManager? I have looked into it and can't find a way to add that variable to a notification. 2. When generating reports, graphs seems to loose granularity (less points per graph) as the time increases in this case we'll use bandwidth utilization as an
Migrate OpManager Instance from Windows to Linux?
Hi. Sorry if this has already been discussed, but is there a way to migrate an instance of OpManager from a Windows server to Linux (specifically, I usually use Ubuntu, but whatever)? Thanks. steven
Fixing OpManager to ServiceDesk Integration/Connection errors
Not sure if this will work for everyone.... Error: Unable to fetch values from ServiceDesk Plus, The server might not be running or the network traffic may be too high This I think is a generic error that something is wrong with one or more of the parameters you have specified. 1. Make sure you have completed the standard configuration: http://www.manageengine.com/products/service-desk/opmanager-integration.html and that you get the above error. 2. Check that you can load up the client (web browser)
OpManager for iphone?
I know this was talked about earlier this year, is it available? If not when will it be?
Disk Usage widget not showing domain controllers
Hi, I have a "Volumes with most Disk Usage" widget, and even though my domain controllers have the disk usage monitors, they do not show up on the top 10 list.
BATs backup the OPM
what is the difference between the BATs: BackupConfFiles.bat = ? BackupDB.bat = Full backup BackupDB_Config.bat = ? BackupDB_Mysql.bat = ? BackupDB_MysqlConfig.bat = ? RestoreDB.bat = Make restore the OPM
SNMP problem
I have a problem on SNMP. I have already activate the SNMP on the servers (Windows 2003) but still not detected by SNMP and not showing the monitoring details.. anyoe can help me what to do. Please help me.
Error: Central Data Folder Status. State buffer or Stats-data files age limit exceeded
OpManager support, We are running EE7104 and are getting the following error message. When I cilck on the "Central Data Folder Status" link, it says "Unable to find the object : Data_State_Central". What does this alarm mean and how can I fix it? Source Central Data Folder Status Severity Critical Last Updated Oct 15,2009 09:34:58 AM Message State buffer or Stats-data files age limit exceeded. Current Age : 428 hrs 32 mins. Thresold value : 1 hrs Critical Oct 15,2009 09:34:58 AM State buffer or Stats-data
changing color of "Volumes with most disk usage" gadget
Hi, is it possible in some way to change wich percent the bars to the left will indicate green/red etc? take a look at this screenshot to understand what i mean: <a href="http://sv.tinypic.com" target="_blank"><img src="http://i33.tinypic.com/111to48.jpg" border="0" alt="Image and video hosting by TinyPic"></a> i want the bars that indicates red,green etc depending on how many percent disk usage, i want to change it so they only show red color if the disk usage is above 85% instead, can this be
get traffic from ports on a switch
Hi, when i enable the port monitoring on a switch, where can i check the utilization of certain ports? like how much traffic or bandwitch they are using`? if you see on this screenshot, the traffic data is now showing up! <a href="http://sv.tinypic.com" target="_blank"><img src="http://i34.tinypic.com/2cr5chc.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
Mibs HP-UX Integrity
does not monitor cpu utilization, disk utilization and memory utilization either, where I get the mib for HP Integrity s.op HP-UX 11.23
Stop alerts on interfaces. How?
How do I get OPMan from triggering an alert each time a port on a switch goes down? I need to see when the entire swicth goes down but not evey interface or PC reboot. I get way to many alerts on switch ports. I am sure it is something easy but I just can't find it. Thank you
Netasq and Snapgear SG580 firewalls.
Hi... Just test and play with Opmanager v8. But i have a small problem. When im using Opmanager V7, Can view my Disk Utilization on Netasq firewall. But when using V8, I cant view it. Other monitoring running perfectly. Then i try using my 2nd firewall (Snapgear Sg580), Opmanager V7/8 cant view my Memory Utilization and Disk Utilization. Other monitoring running perfectly. Anyone can help me please. Thanks.
Traffic is not monitored
Hi! I have a problem with one of our Linux servers. No traffic is monitored there. The credentials work correct (SNMP and CLI). The port is shown as "available" but no other data will be collected. How is that possible? What am I doing wrong? My version is OpManager 8024. Hope you can help me solving this problem! Kind regards, Mok
Performing a GET command on a folder in MibBrowser
Hi, I'm developing an SNMP Agent and I'm having some trouble when I perform a GET command over a folder. When I do that, OpManager seems to make about 2k requests to my SNMP agent always asking for the folder's OID instead of it's leaves' OIDs. So my question is: how can I make OpManager cycle through every leaf of a given folder? Thanks for your replies, Francisco.
Encrypted CLI authentication passwords
Hi! If I want to use CLI I always have to change the ssh configuration at my Linux systems. The PasswordAuthentication setting has to be set to yes (accepting clear passwords). In my opinion this isn't the right safety concept. It would be very nice to send CLI authentication passwords encrypted. Is that possible?? Kind regards, Mok
Performance monitors do not work all of a sudden
Hi all, we are using Opmanager for our customers, all of a sudden the performance monitors for a few customers - not all- stopped working. SNMPWalk is able to retrieve data whilst Opmanager self is silent like a ghost. Does this ring a bell with anyone? Thanks in advance! Kind regard, Martin de Pijper
Process Monitor Messages
How can I change the messages that a process monitor sends in the emails? Norman.
Partition Details Percentage
My All Linux Servers have Mounted NFS FileSystem with nTB Size Why OpManager With Last Hotfix send Errors ??? "Partition Details of the Device (%) for /net/kbmonsrc is 115 Percentage, threshold value for this monitor is 85 Percentage" "Partition Details of the Device (%) for /net/kbmonsrc is 140 Percentage, threshold value for this monitor is 85 Percentage" "Partition Details of the Device (%) for /net/kbmonsrc is 102 Percentage, threshold value for this monitor is 85 Percentage"
OpManager Prerequisites Install Error
Hi. I'm following the instructions here... http://www.manageengine.com/products/opmanager/help/installation_guide/inst_linux.html The first section lists a bunch of prerequisites. So, I started to install them. The first one is xfree86. So, I ran that command as follows... sudo apt-get install xfree86 Then I got this message... E: Could not get lock /var/lib/dpkg/lock - open (11 Resource temporarily unavailable) E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using
Cant load MIB from QNAP TS-509
Trying to upload a mib file I got from the manufacturer QNAP fot model TS-509. However, it cant be uploaded in the MIB Browser. It just says "Cant upload MIB". If i drop the mib file to the Opmanager server in folder Opmanager\mibs I can see it in the browser but I cant select it. Error message: Error parsing MIB:NAS.mib Exception while loading MIB:Could not parse the file C:/Program Files/AdventNet/ME/OpManager/./mibs/NAS.mib. Couldn't resolve these sequence constructs : { IfPackets } Am I missing
discovery problems
I am testing opmanager, but discovery of my network is being more than cumbersome. using the Range method results in the system freezing unless i use a single range, i.e., 123.123.1.0 to 123.123.1.254. I use the correct netmask, thanks for asking. If i use an extended range, 123.123.1.1 to 123.123.10.254, the system hangs after a percentage if discovery. If i use the CIDR method, 123.123.0.0/24, I'm expecting opmanager to discover my entire 123.123 network, but it discovers nothing. Maybe I'm
Users (or Customers) to use the OPM product will have configured the threshold value.
Dear All, Users (or Customers) to use the OPM product will have configured the threshold value. Our customer wants to know the threshold value (AD, MS-SQL and MS-Exchange server) which they configured. That is to say, they wish to refer to the threshold value which different customer configured. We also know that thresholds are based on business policies. But our customer wants to refer to other customer. Thank you in advance.
monitor hp-ux with OpManager ?
how can monitor hp-ux cpu and memory and Partition Details of the Device (%) with OpManager ? my hp-ux snmpd.conf seting is (get-community-name: public )
OpManager custom device template export - ???
Hi, OpManager 7004 How I can export and import custom device template? regards, Vadim Zenin
Error on replicated OpManager Windows Server
Hi. I'm trying to get my OpManager service separated from other services (which is my normal routine). For a while, I've had my OpManager running on a server which also has other things runnign on it. So, I replicated the Windows server on which I am running OpManager so that I could have it on a server of its own. Of course, I renamed the Windows server, gave it a new SID and IP and did everything else necessary for it to be a completely separate server. I then shut down the service on the original
[Ubuntu] SNMP test credential Failed
Hello! I've set up OpManager 8(8022 Free Edition) on my Ubuntu 9.04 Desktop yesterday, and leave computer running to test... But I think I've a problem with SNMP in OpManager (or my linux, why not :) ) no disk utilisation, no cpu and memory used, etc... This is what I've set up : (added snmp + snmpd in my system) /etc/snmp/snmpd.conf : com2sec readwrite default perso disk / 100000 disk /home 100000 disk /mnt/raid 100000 /etc/default/snmpd : SNMPDOPTS='-Lsd -Lf /dev/null
OpManager web interface customization
Hi, I wonder if is it possible to customize OpManager interface: I would like to edit the menu bar and/or delete or add links. Is there a way to do this? Thanks
Adding event log rules into templates
I'm pretty new to OpManager and I can see where I can set indivual devices to alert on certain event logs, but can not see how to add it to a template. As we want to be able to monitor for a certain event id's across the 100 odd windows 2003 servers we currently have already using the windows 2003 template. Thanks in advance for any assistance.
Cannot connect monitors to the snapshot dial graphs for new device template
Hi, I am using OpManager 8.22 that I am currently customizing by adding templates for our own HW. I have been reading the forum now for several days to try to enable the CPU utilization graph for this custom devices. This is what I have done so far: 1. Created new category - RLSgroup 2. Created a new device template - SatLink RLS-85XX - inserted in the RLSgroup category 3. Added monitors to the SatLink RLS-85XX device template. Verified that the monitors are working correctly. My problem now is that
<<servername>>.err
Hello. We have noticed that our .err file in the mysql\data folder is growing quite large. At the moment it is over 1GB in size. Is there a way to reduce or remove this file? We also have a lot of relay.bin.00xxx file. Can i stop the server from producing these files?
Anti-Virus exclusions for OpManager
Hi, We are in the process of configuring a new Anti-Virus product and are wondering if there are any exclusions that need to be performed in order to optimize OpManager performance. Thanks! Rob
How is memory utilisation calculated?
I have a Windows 2003 server with a registered usage of 91%, but pulling up the process list from OpManager shows processes using only 6% of the available memory. Is OpManager including file cache in its overall count, or is it counting total memory for the percentage different from how it calculates per process usage? The current warning I am seeing for example: Memory Utilization is 87%, threshold value for this monitor is 80%: Top 3 Processes:-sqlservr.exe - 3%;Mcshield.exe - 2%;FrameworkService.exe
File size monitoring
I know I've seen it discussed in the past and it's been stated that it's an upcoming feature, but do you have any updates on the file size monitoring capabilities for OpManager? I have a situation in which it would be very useful to be able to trend a log file size. Obviously its easy enough to do via other means, but it would be nice if OpManager was able to do it.
Updating custom device templates directly in the database
Hi, What is the procedure to add a monitor to a custom device type directly in the database? The reason for this is that we have many OpManager installations were we want to update some custom device types. BR Terje N.
Next Page