Cisco routes listed incorrectly
Hi, I am new to OpUtils and I am using OpUtils 4 professional version. When I attempt to use the ip routes tools to determine routes on a 6509 switch/router and it seems the columns values are in the wrong place. When I run the tool the destination network appears under protocol, under destination are the known by interface ip address, and the next hop list an interger value of 11 for all listed destinations rather then an ip address or hops #. The routes on my router are fine. How can I correct
OpUTILs doesn't start - CreateFile error while creating DB
Please help [14:16:09:043]|[10-06-2008]|[com.adventnet.persistence.PersistenceInitializer]|[SEVERE]|[10]|: Exception while creating DB : operating system directive CreateFile failed null|java.lang.RuntimeException: Exception while creating DB : operating system directive CreateFile failed null at com.adventnet.db.adapter.firebird.FireBirdDBAdapter.createDB(FireBirdDBAdapter.java:326) at com.adventnet.persistence.PersistenceInitializer.startDB(PersistenceInitializer.java:553) at com.adventnet.persistence.PersistenceInitializer.initializeDB(PersistenceInitializer.java:331)
TFTP y Config Manager for other devices
I have 9 router ENTERASYS, and i like to manager the configs for this with the OPUTILS. The TFTP server accept this configs, but i can�t to compare the configs or upload the config to router. ENTERASYS is a mark of router important, have many functions similar to CISCO.
How come updates are no longer shown on the Website?
I noticed that on the website http://manageengine.adventnet.com/products/oputils/service-packs.html updates are no longer shown. I know that build 5024 at the least is available but I can't find anything later than 5001. Was the updates relocated somewhere else? :?
what about SNMP v3?
i have anews letter that tell Opmanager is now support SNMP v3. but about OpUtils?
Disable TFTP Server
Hello, i would like to disable the TFTP Server from Oputil, we have a different TFTP Server running on the same Server to do the IOS Updates, Is there a chance to disable the tftp from optutil to get the port free for the other tftp server
OPmanager 7.0 loss admin password
Hi, Support; I have loss my opmanager 7.0 admin password, and i tried the guest/guest , i still can't login to opmanager, how can i do for recovery the loss password? thank you.. Eric
Switch Port Mapper Enhanced
Dear All, The Switch Port Mapper has been enhanced with the following features in our latest update - build 4409: 1. Option to group Switches and map them separately. 2. Switches in different groups can be scheduled separately. 3. Shows the previous mapping results, which can be downloaded as CSV. 4. Enhanced scalability in handling huge data (with over 1000 switches)The latest upgrade pack can be downloaded from http://manageengine.adventnet.com/products/oputils/service-packs.html We appreciate
Move OpUtils
Is there a procedure to move OpUtils to another server ? Is it possible to migrate the database to Microsoft SQL ? Can it Run on the same server has ServiceDesk Plus ? Thank You. Mathieu.
Backing up the Database
Hello, Can you tell me how I can do a manual backup of the Oputils data files in case of failure? Thanks, Mark mkrauser
Euro Roadshow 2008
THE ROAD TO BETTER IT MANAGEMENT - STARTS HERE Good news! ManageEngine is coming to Europe. Starting with Denmark, the ManageEngine Euro Roadshow travels to Sweden, France, Italy, Germany, Portugal, Poland, and United Kingdom. ME Euro Roadshow - your channel of IT information The ManageEngine Euro Roadshow is an exclusive opportunity to meet, converge, and communicate with leading industry technicians and administrators working in the same line as you, sharing your interests, focus, and even challenges.
SNMP trap receiver
I use Oputils on the same server as OPmanager, which I need to receive traps. Is there a way to permanently turn off the trap receiver?
Port Monitoring
Hi, I am trialing your software and would like it to email me when a MAC address changes on a port and to include the manually added physical location ie 'Sales Department N34' Is that possible? Thanks Gareth Baxendale
Config File Manager Import
Hi, Is there any possibility to import a list of routers/switches to the config file manager? Thanks for every hint. Andy
DHCP scope monitor issue
When i try to add a DHCP server.. I click add new DHCP server link and the put in the IP/name of dhcp server.. then click get scope.. then It says DHCP server addes sucessfull at the top above.. where i put in the info.. but down below there is NO DHCP server. It doesnt seem to be working.. or actually ADD teh DHCP server. Im using teh latest version i just downloaded yesterday. Doug Hupp
Port numbering on new switch is incorrect
Hi there, I've just been playing around with the Switch Port Mapper as I've never properly used it before. My development network consists of two Extreme Networks Summit switches and two Cisco 4948 switches. For the Extreme switches, each switchport number (ifName) matches up to the Port No shown by OpUtils, for example ifName 1/1 equals Port No. 1, ifName 1/2 equals Port No. 2, and so on - which is just fine. However for the Cisco 4948 switches they do not match up, an example of what I see on one
Port Monitoring
Hi, I am trialing your software and would like it to email me when a MAC address changes on a port and to include the manually added physical location ie 'Sales Department N34' Is that possible? Thanks Gareth Baxendale
Swtich Port Mapper
I have 2 problems, first when I try do an scan of my swtiches it actually seems to be doing it but is being for almost 5 hours and still saying scanning in progress. second problem, in the same section I have a group defined and is scheduled to scan my switchs every 6 hours but is not doing it, if I scan manually happens what I already explain before. the same problem for routers, it does not scan the routers I already sent my support log file to tech support, I tough in forum will be faster
upgrading the license
I have a new license to extend my trial for two more weeks. But the optiutil locks up when I try to browse to the license.
Rogue Port Dection and switch port mapper
Hi With an environment of Cisco 79xx VOIP phones linked to other devices via the phones inbuilt network port, the software alerts a new device has been found. The software can link the phone being connected to a specific switch and port, however the 2nd device such as the laptop or desktop connected to the phone is unavailable and can only list which switches it has traversed. Can this information be displayed, otherwise the software is not much use in this regard, or are we doing something wrong.
IPAM Scanning?
Hi, Is it possible to disable scanning of only one of the subnets in the IPAM and scan the rest? Please advise
switch add issue
Hello, I try to add a cisco 4500 switch on my switch port mapper in Oputils. But when I click add I've the message is not a switch but I'm sure is a switch. I've got other SNMP poller that well recongnize the switch. What I can do? Olvier LEFEVRE
vlan recongnition
Hi, I implement several cisco switch without problem. but I'm suprise to see 2 ports with the same Mac address, same ip address but different vlan. On the switch we can see the 2 vlans and 2 ip and 2 mac address. Could you please tell me if it's normal to see that? thanks Olivier LEFEVRE
how to use
how to use this software JAANLEWAA
Switch Port Mapper and LAG ports
Hi, We Force10 switches that we've configured with LAG's (Port Channels, or multiple physical ports combined as a single virtual port). Switch Port Mapper isn't show us what systems are connected to any of our LAG ports. Switch Port Mapper sees the port channels but apparently isn't getting the bridge table entries for those ports. What should we do to resolve this? -Brian Brian Booher
Config File Manager
Hi, I wnt download the config from a HP 5308 Switch. The OpUtils error message is E4005: Not a Cisco Device. Any ideas? greetings
Log files!! too big
Hello I am using version 4.5 oputils on an ubuntu box. my log files are reaching high volume of +1GB....can someone tell me how to clean the log files or decrease this phenomena!! (atleast configure sizes) regards Ray
Monitoring parameters and email alerts
I've just install OpUtils 5 and play with it for a while, but didn't find alerts configuration option. For example: if errors appeared on Cisco switch interface then send email-alert to designated email-address. Can it be performed with OpUtils 5 or any other software from AdventNet? Thanks in advance.
Config File Manager
I am getting the error "Error retrieving config file " in config file manager. Where is the log file that I can look at to try and determine what the "error" is?
SNMP scan returns incorrect System Type for HP Procurve swit
I'm testing OpUtils and found one problem. We have both HP Procurve 2626 and 2810 switches installed. When I do an SNMP Scan, the Procurve 2626 switches are listed with a System Type of "hp procurve switch 2626-cr" but the 2810 switches are listed with a System Type that is actually a device's DNS Name. Any idea why the Procurve 2810 switches are not listed with the correct System Type?
moving existing data to another physical server
We have to change servers and i was wondering how i can get all of the data from one Oputils server to another.
Bandwidth Monitor
When I 'Add A Device' and select the 'Interfaces' I wish to monitor, they add but once added, the ifStatus goes to red The status was Green when I selected them Please can you advise? Thanks
CLI and Cicso 851
I already was able to anwer my previous question about ssh or telnet, its telnet only ! Anyways, I have quite a few Cisco 851 routers, and they require a login name and password for cli, but login name option isnt available for cisco devices. Please advise.
Source for Rogue Devices
Applied the latest hotfix, and Im still not seeing the "source" of devices. For instance, Oputils is polling some routers to get the mac addresses. There are not any managed switches at these locations. The device shows up, and I have no idea where it is. Now most instances you can be pretty sure by the IP, but others I cannot. For instance, what if a machine tries to get on the network without DHCP and a different subnet. Of course, it wont work. But then it uses dhcp and gets a valid IP, this would
"Add Subnet" should allow any subnet mask
When I try to Add Subnet manually, there is a dropdown menu for the Subnet Mask, which only contains common masks. We use variable length subnet masking, 3 of our subnets are 255.255.254.0 and one is 255.255.252.0. Please change this field to be a text input field rather than a dropdown menu, or add all possible masks to the menu. Thank you, -- MB Marion Bates
Remove software
I have a trial version and I want to remove the program. When I try to remove it it come up with a message to remove a previous version. The version i am trying to remove is Oputils 5... Thanks..... Arthur Davis
Grouping of network monitored devices
Can i create a group for devices i want to monitor. e.g. we have wireless APs per building and I would like to group each building so I can see at a glance if there is an issue. Or should I use another method within the program to monitor a group of devices? thanks
OpUtils stay in iFrame
We are running a web-based control-panel to link all of our AdventNet tools together. Right now we have a main index that has links to open each tool (AssetExplorer, Firewall Analyzer, OpUtils, etc) in an iframe. Every single tool except OpUtils will stay in the iframe after logging in. OpUtils seems to go to target _top, which breaks out of the frame. Is there any way to fix or work around this so that OpUtils will stay within the frame?
Adding a switch after it was deleted fails to show up
I deleted a switch from the Switches tab under switch port mapper and the next day tried to add the switch back and it does not show up. When I add the switch in the Add switch pop-up it says the switch was added successfully but it is no where to be found.
MAC Address Resolver java exception
Hi, we are user of ServiceDesk+ and OpManager MSP. Now we are evaluating OpUtils. MAC address resolver is the tool we are interested in. We are hoping, that in conjunction with switch port mapper we will get IP <-> switchport mappings, we so desperately need to eliminate work to locate IP addresses manually through router/switch console. We are getting error, when running MAC address resolver: [Exception in:/lan/macAddressResolver.jsp] java.lang.StringIndexOutOfBoundsException: String index out of
Next Page