Notification when device is up
Hi, I would like to know if is possible to create a notification which triggers when a device is up. Thanks
extraction error on install
during installation i get an extraction error at 99% "unpacking failed". i extracted the installer, ran this setup and get this failure. OpManager 5.5 (i try 30days trial and monitor up to 10 nodes with same error) Windows XP-Prof free diskspace on C:\ : 2,7 GB File: stub32i.exe size: 28,5 MB (29.947.183 Bytes) size on disk (NTFS): 28,5 MB (29947.932 Bytes) downloaded : 24.05.2005 error : "popup window" servere - unpacking failed i try it again (on C:\ and on other disk) with same error destination
unable to change Device type
License Type : Free Edition Company Name : AdventNet Development Build Number : 6010 Expires on : Never When i try to change Device type i get e new widows with just Error! written in. I also noticed that password are lost (fields are empty). Furthermore thus the discovered type look correct (router cisco 2600) i cannoth find in password the same field list as another Cisco Router.
Citrix MIB
Hi, I am having problems loading the MFAgent-Mib file in the mib browser. I get the following error Error loading MIB: /servlets/../mibs/mfagent-mib com.advent.snmp.mibs.MibException: Could not parse the file /servlets/../mibs/mfagent-mib The 'INDEX' or 'AUGMENTS' keyword was missing in the table row object type construct which contains the sequence as OSListEntry I have tried another mib with the same problem. I have attached the mib please let me know if get the same error. Any ideas would be appreciated.
SNMP Disk monitoring Graphs
Hi, I use the same SNMP disk monitoring for monitoring disk in Windows 2003 Server, but some servers use different graph to display stats. With the image - 2, I see only one graph with all disks and at the bottom, I see a historic of all poll. Some server use the graph displayed in the image - 1. How I can change theses servers to display graphs identically to the image - 2 ? Thanks, Steve
Moving the Temp Folder
Hi Is it possible to Move the Temp folder under Opmanager to a differen location?
Network utilizatio, bandwidth, traffic etc..
Hi Guys, I was wondering if there is any sort of tool built into Opmanager that will analyse and report the status of the netwrok, as in the bandwidth usage, and any bottle necks. Basically something that will tell us when the network is slow, and if there are any problems.
Web on another port than 80
I know you can change the web port for all devices-but is there a way to change it for individual devices? Say I run http on port 8080 (without of course creating a new custom service) or does everyone just create a Web8080 Custom Service? My goal here is not to have a ton of collums of 'web'
OpManager 6 How to discover attached networks
How can we discover attached networks to a router? I want to discover the WAN IP, LAN IP and attached LAN network IPs. Is there a way to specify multiple hops in the discovery process? If a customer has the same LAN numbering scheme, is that an issue? I do not want to add the discovery for the LAN block separately. I am looking for OpManager to offer a sub-network view for all WAN networks that shows all devices on the LAN.
Exchange Store Used Disk Size N/A
Hi All of my Exchange Monitors work except the Used Size of the Public and Private stores. When configuring the path for these stores I used E:\exch_store\MDBDATA\priv1.edb and E:\exch_store\MDBDATA\pub1.edb Is this the correct syntax to enter?
Exchange Monitor Shows N/A
I am checking out the exchange monitor for my 3 exchange servers but they all show N/A for all the services they are monitoring for exchange. Is their something I need to enable on the exchange server?
Changing Monitoring Interval
I am trying to change monitoring interval as well as disable monitoring of devices ie Printers, Desktops. But when I go to Admin > Monitoring Intervals and unselect endable desktops -> select save it will revert back to the current settings. Is there any other way to disable monitoring and discovery of certain devices types
checkpoint monitor problem
i have checkpoint firewall which enabled cpsnmpd running on solaris which installed netsnmp i try to add device on opmanager to talk with firewall on port 161(netsnmp) it s work well. then i added custom monitor loaded from checkpoint-mib to talk with firewall on port 260(cpsnmpd) using this command : cmd> cd [OpManager-Home]\mysql\bin cmd> mysql.exe -u root -P 13306 OpManagerDB mysql> update Polleddata set PORT='260' where Name='Monitor name' and AGENT='10.1.xx.yy'; but it s not work . log show
OpManager 6.0 Won't Stay Loaded Linux
After initializing OpMan as follows: cd /opt/AdventNet/ME/OpManager/bin/ ./StartOpManagerServer.sh & and then pressing Ctrl-C to exit the operation and leave OpMan in the background, it most of the time won't stay running. As soon as the shell is closed OpMan closes. If I do it enough times it will stay running. Solution? Fedora FC 1
Monitoring Router during Office hours
I want to monitor number of routers which are connected to my other offices. These offices are working between 1000 to 1800 hrs. Can you tell me how to check availability of this routers during office hours only and not on 24 hours basis. Op manager monitors them for 24 hrs basis and shows more downtime.
Test result is error, Mibbrowser works fine
On one of our servers (a Fujitsu with Xeon Proc) and W2k installed, there is something strange ... After discovering the server, it adds a Interface tx traffic monitor by default (among others). When i test this monitor it gives an error. But when i enter the OID from this monitor in the MIB Browser i get a result (multiple actually) When i delete the monitor and add a traffic monitor Interface tx traffic it keeps asking me for SNMP settings (which are correct). It doesnt ask me on what interface
I need your help to generate some reports
Hi all, I'm using OP6 in a large installation and I need to generate some reports like CPU usage for a month,like the image I have posted. I need to create these reports every month as scheduled report. Can anyone helps me to create it? My best regards. Daniel Lopez.
Run System Command
Hi, I'm trying to get the following system command to work agains a web server when the URL monitor goes down. "C:\WINDOWS\system32\iisreset.exe $displayName" It's posting to following error Command Output: Command Error:Command did not execute: ":WINDWOS\system32\iisreset.exe webbl01" Expection:java.io.IOException: CreateProc Any ideas........ :)
Monitor Percentage Changes.
Sometimes firm changes aren't good enough - we need percentage changes. For example, a drive could drop from 1.5 TB to 500 GB over a 1 yr. period and this would be entirely normal. But what wouldn't be reflected would be if a 1.5 TB drive dropped to 650 TB in 2 hrs. This would indicate a severe problem that I am not aware of any way that AdventNet's OpManager currently handles. David.
unable to detect that the machine was SNMP enabled.
Dear, Good day! I was wondering why OpManager doesn't seem to identify some of our servers correctly. as i tried to delete, re-discover the device, re-discover the network for the OpManager to be able to detect the device as SNMP enable but i have no luck. still, it discovered as desktop. huuh!! our OpManager version is V6.0 build #6003 although, i can get the disk, memory, cpu utilization of those servers by using the WMI, but my boss wanted to monitor it using SNMP protocol as our standard. plus
Timezone
Hi there, I am facing problems with timezone regarding my installation of OPMANAGER. Does anyone knows a workaround for this problem ? My OPMANAGER is running as a service in a Windows 2003 Server.
Traffic Monitor - Interface problem
Hi, I would like to monitor the interfaces on Windows Server 2003. In the device, the nic is correcly discovered but all counters are marked NA. The interface index is 65539 and 65540 (Dell PowerEdge server with Broadcom). The interface 65540 is not connected and not visible when I click on rediscovery, but I have receive an alert for link down on it!!!! When I add a Traffix Monitor for the "Interface Rx Utilization - Broadcom NetXtreme Gigabit Ethernet #2" (Interface 65539) and I click on it for
Getting Serial number of Servers
Hi, Is it possible to get the Serial number of servers automatically from opManager tool. Thanks
Can't Uninstall trial version
Hi, I downloaded the trial version of your Wifimanager and it will not uninstall no matter what I try. It doesn't show any more in the add/remove programs, but it keeps freezing my machine and won't uninstall. Thanks
Cisco Catalyst 3548XL
Good day. I am looking to monitor the Backplane on a Cisco Catalyst 3548XL. The current OID is .1.3.6.1.4.1.9.5.1.1.8.0. When browsing the devise SNMP MIB I get the following: enterprises.9.3.......... enterprises.9.9.......... but no 9.5................. for BackplaneUtilization Any ideas on how to monitor the backplane on this device? Your support is greatly appreciated.
Automatic Monitor Addition.
It would be nice if devices would automatically add alarms if so instructed when new devices are added. For example, servers with DAS (direct-attach storage). Its hard to remember to add an additional monitor everytime you add a drive - especially if it is a 24/7 operation where work must be done at off-peak hours. David.
Multiple Alarms for Same Monitor.
It would be nice if we were able to establish multiple alarms for the same monitor. For example, if I have a 300 GB drive I'd like to receive an email say every 50 GB it goes down. But then when it reaches 25 GB I want a text message - b/c I wouldn't normally let it get down that far. Right now it seems the only thing one can do is reset this manually at each step, which is a lot of work. David.
All Servers Availability Report
All Servers Availability Report - Today (Wed, 25 Oct 2006) - Time Window - 8:00 AM - 8:00 PM is there a way to change the time that tthis is between we are looking at 8 am till 6 pm Aaron
Custom WMI
Hi, is it possible to add custom WMI monitor or I can only add custom SNMP monitor ? Steve
OpManager MySQL monitoring with Advent MYSQL Agent
Hi I am tring to get the AdventNet Micro Agent mySql agent running any monitoring the OpManager MYSQL database. Are there any special configurations that i need to do? I am running OpManager 6010 and Micro Agent for MySQL 1.0.5 when started the agent says the database is down and then shutdowns the OpManager MYSQL DB brian
instant sms toolkit
Is a serial connected gsm modem or telephone the only supported way if you want the sms functionality in op manager? I have tried with a sonyericsson w800 via usb, but op manager says that the modem is not connected properly. check your settings. Regards Stefan
More options for user priveleges
When logged on as admin. In the users section. Is it possible to add more restriction, rather than just read only? Could this be added as a feature. We want to add access to some of our users but not let them see certain parts of the application. Thanks Andrew
question about compaq temperature monitoring
Hi all, I have setup temperature monitoring for Hp/compaq servers. All works fine, but when I check the graphs I receive 7 different graphs with the names 0.1 degree celsius 0.2 degree celsius until 0.7 degree celsius. What do all these graphs mean? Does the server have 7 different temperature censors? If so, it is impossible to see which censor is used for what purpose. Anybody knows? Thanks in advance
Monitoring VPNs using the MSP version
Hi I'm trialling the MSP version of the software (which is going well) but have a questions regarding the monitoring of VPNs. We have a number of customer sites and I have installed a probes at these sites. Even though we have VPNs to the sites, I have set up the central server and probes to communicate over the internet - I've done this so that if the VPN is down, the probe can still communicate. What I'd then like to do is monitor the status of the VPNs from the central server (I have installed
Memory Utilization For Linux Servers
I'm using free version of OPmanager6 on windows2k to monitor RehatAS servers. For memeory utilization, opmanager is monitoring RAM only not including swap space. I'm using telnet/SSH based monitoring. How include the RAM+Swap space in memeroy utilization statistics. Regards, Raj.
Scale on SNMP graphs do not seem to be correct
Using the newest release of OpManager it appears that the scale on the snmp graphs seems to be incorrect. I believe the rise and falls of the graph are correct, however, the scale on the Y axis is incorrect. For example, on a link that hosts over 30 computers it is telling me the highest traffic level has been 200 K. This seems hard to believe. I am getting the same thing for the traffic reports on my windows servers.
Trying to Monitor asmx urls
I cant seem to monitor a Microsoft Team Server - URLS /....asmx how come?? says can not find host, but when im on the monitoring server i can access it via IE.
Windows Service Monitors not available under RHEL4
We've just gone from testing to production with OpManager. Our test installation ran from a Windows XP box and we had no real issues. The production system is running of RedHat Enterprise Linux 4 and I've found that Windows Service Monitors and Event Log Monitors are not available. They are not even present on the ADMIN page as options. Does the Linux edition not have the ability to monitor Windows services, or am I missing a dependency somewhere?
AD plugin not licensed
Hi, I have this issue. I haven't purchase license for AD plugin. When OpManager rediscovers my DCs it moves them to Domain Controllers container. This is annoying as I have to move it back to Servers container. Furthermore, when the DC is moved all history information for that server is deleted. Is there anyway to avoid this behavior? Thanks, Rodrigo.
Lotus notes monitoring - OPManager * Application Monitoring
I am looking for a Lotus Notes monitoring software. In the following <URL>, we can find a Lotus Notes monitoring reference < http://manageengine.adventnet.com/products/opmanager/application-monitoring.html > Questions : 1) The above OPManager web-page reports that supports monitoring the following applications : MS Exchange, Oracle, Lotus Notes, etc... In the Online Demo I couldn�t find any reference about these monitors. Aren�t they embeded on OPManager ? 2) Where can I get more informations about
Next Page