OpManager 7 -- Scheduled Reports
When scheduling reports, I get send PDF's with reports that state 'No Data Available'. THe only report I have tried that has data is the server availability report. Others, such as CPU usage, Least Free Space all come back blank.
trial probe conversion
hello. is it possible to convert trial probes in MSP edition to full probes?
swap space util on solaris
can you please tell me how to view / edit the command that opmanager uses to monitor swap space on solaris servers as the command that exists does not work. linux uses the free command which works but solaris does not have this utility so would need to use vmstat.
Devices added to google map do not show on map
For some reason when I place any device under the router category on the google map it does not show up when I click add. When I add a server to it they all show. Any ideas?
unable to run repairDB
When I try to repair the DB I get error 22. We are using SQL server and not my sql
Unable to fetch Interface Details
I have one router that the FA0/0 will not show up in the Interface list. It does show up in the Routers\Map but when I click on it I get "Unable to fetch Interface Details" I have deleted the device and waited 14 hours and re added it same issue. I see all the other interfaces on this router and my other routers. Any ideas?
UPS Monitoring
Opmanager has detected my networked ups's but it doesnt show extended battery information - i've set a working login name and password up in the software which i can log into the ups with but it still doesnt get the stats. Any ideas ?
Permissions to monitor windows servers
We are using OpManager to monitor our Windows 2003 Servers. Right now we are using credentials, which belongs to Domain Admins group and everything is working ok. We would like to use an account that does not belong to Domain Admins group, but what kind of permissions should we give to this account?
IBM DS4500 drive monitoring
I was wondering if there was a way to monitor the drives in a DS4500 SAN. I've been trying to do this unsuccessfully. Any help would appreciated, Thank cmh
Eventlog in Windows server
Hi, I have configured Event Log Rule for one of Windows server. WMI and SNMP is working properly to this server from OpManager. I have configured to monitor ANY event log but unfortunately no new alarms are discovered in OpManager... any ideas why? regards Slawek
Event Log events with a dollar sign in them
I've noticed that OpManager doesn't email the complete event if it contains a dollar sign. The event details are truncated. I assume this is because of the scripting language being used. Is there anyway to fix this? I'd really like to be able to see the entire event detail in OpManager.
MSSQL application
Hi, Op-Manager version 6 Build 6016. I have a SQL 2005 in an CLUSTER environment. I have follow the same way to add the SQL virtual server as Exchange 2003 virtual server. Based on SNMP querys I am able to monitor the disk space on the virtual disks (mounted from a SUN) and setup thresholds for them. All other normal services and monitors using SNMP are fine. I have added the MSSQL monitor feature to this machine and setup a domain user (the same that is running the SQL services) for access the WMI.
Graph Viewer
Where can I get a graph viewer for OPManager 7..
OpManager Redundancy
Our enterprise is spread out across a broad geographical area and as we develop our reliance on OpManager we have been discussing the potential for maintaining a secondary, COOP, server that is configured identically to our primary and available immediately with minimal configuration should our primary site go down. Does anyone have experience/recommendations for such an implementation? Thanks.
Multiple OIDs on one graph (not indexing)
I want to graph 2xx, 3xx, 4xx, 5xx errors on one monitor (ie graph) e.g. tried and failed using bulk monitor adding these to "SNMP OID" .1.3.6.1.4.1.3375.2.1.1.2.4.3.0,.1.3.6.1.4.1.3375.2.1.1.2.4.4.0 then .1.3.6.1.4.1.3375.2.1.1.2.4.3,.1.3.6.1.4.1.3375.2.1.1.2.4.4 then .1.3.6.1.4.1.3375.2.1.1.2.4.3.0 .1.3.6.1.4.1.3375.2.1.1.2.4.4.0 then .1.3.6.1.4.1.3375.2.1.1.2.4.3.0 .1.3.6.1.4.1.3375.2.1.1.2.4.4.0 BIGIP OIDs sysHttpStatResp2xxCnt, .1.3.6.1.4.1.3375.2.1.1.2.4.3.0 sysHttpStatResp3xxCnt, .1.3.6.1.4.1.3375.2.1.1.2.4.4.0
CPU Utilization
Hi, I have 4 Dell Poweredge 2850 with red hat 3. Opmanger is monitoring their CPU Utilization, but most of the time the current value is the same. We used the command "top b n 1 | grep -i 'CPU*'". I notice if I used n=2 or 3, the second or third "command" shows up a real value. I attached the example. Why does this happen? Are there any way to solve this? I would like to add up USED CPu and System CPU. Are there any way to do this? Thanks
AS400
How can i configure the CLI parameters fro AS400. what are the proper prompts that should be inputted on the CLI parameter..
No Interface Data for ASA and PIX
I am having issues with interface data showing up on both an ASA and PIX firewall device. SNMP is configured correctly as well as the CLI Access. Any assistance would be helpful. We are running Build 7024 with MYSql local install. Thanks, Joe
switch port mapper
Hi all, when i try and use switch port mapper, i enter the relevent details and it simply comes up with "sorry! an error occured" any ideas? :cry:
discovering NIC on servers
Hi all, did you ever have problem with adding NIC in OpManager? I have server, I have been discovered interfaces - it finds one, then I click "Add interface", message "interface added successfuly" but after that there is no NIC in interfaces :( Any idea why?
Unable to run DatabaseMigration.bat
Hi all, When I'm run the DatabaseMirgration.bat file I get the message below and the batch file just ends with no database creation. java.lang.ArrayIndexOutOfBoundsException: 0 at com.adventnet.me.opmanager.operations.UpdateConfChangesWrapper.main(U pdateConfChangesWrapper.java:15) All help would be greatly appreciated.
Problem running OPManager MSP on a Vmware machine
Hello Support: I am in an evaluation phase and I am having some difficulties running OPManager MSP Central (Latest version) on a VMWare machine (Windows 2003 server standard built inside an ESX 3.5 server). The installation went well without any errors. However, when I try to launch the application I get the following error: Webserver port # is occupied. Please stop the apache and its dependent processes and then start the server. I get this error regardless of the port # I use during installation
UDP Scan
Hi, Any chance there is going to be UDP scans when checking services any time soon? Radius cannot be checked unless you nmap it on UDP. Thanks, Marcel Pare IT Support Specialist Kronos Incorporated http://www.kronos.com Experts at improving the Performance of People and Business(tm)
Cannot Find Devices after succesful Add
Hi, I have been having the same problem as jblack in forum issue 286911. Ours is a brand new install of Ops Manager 7024 All servers, printers switches and routers have added fine, but we have four temperature/humidity probes scattered around. These are sensorprobe2's from AKCP (http://www.AKCP.com). I have added them and they show as sucessfully added, but when I go to search by IP address they will not show up. Instead I receive the "Sorry your search returned no results. Click here to add a device."
Can't Update Build 6011 with 7.0 Migration Pack
I am unable to use the 7.0 Migration Pack for Build 6010 +. I downloaded the Migration Pack from the Downloads section on this web site, disabled the OP Manager Services, ran the backup batch file, then tried running the Update Utility. When I selected the 7.0 Migration Pack File, it says: "The file you have specified is not compatable with this product." I am running Build 6011 of OP Manager on Windows Server 2003. It is on a VM Ware Box. Any sugguestions on what I can do to get this to work?
Problems deleting alarms - OM7 build 7021
Hi, Trying to delete some alarms and get the following . What is wrong please ? Failed to perform the operations for the following objects. Failure Object Reasons 1 IF_DISCARD_3290 false 2 IF_ERROR_3290 false 3 IF_DISCARD_3331 false 4 IF_UTIL_3291 false 5 IF_UTIL_3289 false But, the operation is successfully completed for the following objects. Failure Object 1 chpfs02.cofunds.co.uk_AuthenticationFailure_trap 2 chpsms01.cofunds.co.uk_AuthenticationFailure_trap 3 chpsun01.cofunds.co.uk_AuthenticationFailure_trap
MSSQL Monitors - The Monitor did not respond...
I've enabled the MSSQL Monitors for my SQL server but I don't see the graphs for the monitors that I've enabled. When I tried to test the monitor, the following message appeared: The Monitor did not respond to the test request My resource monitors for the same server is working fine. Any ideas on how to resolve this? Thanks.
How do I remove an object from the inventory list?
I deleted a desktop from the map view, but it still shows in the inventory list. I ran another inventory scan, and it is still there. I then ran the sync tool here: https://<probe>:<Port>/admin/SyncDetails.do This had no effect. Does anyone know how to edit the scanfi DB, or another tool that will remove orphan objects from the inventory list?
Cisco router interfaces gone missing
We have several Cisco routers, and all the interfaces seem to have gone missing ?!? 3 different models, all have interface templates setup, and were working fine a week ago when I last checked. They have disappeared from the device view. But they still show up in the Infrastructure View ?!? [URL=http://img255.imageshack.us/my.php?image=interfacesmissingnm3.jpg][/URL]
I Need to create a History file system Report
Hi it's possible to create a month report with the following output ? ID: Server or device Element: File System or partition date: Date range: [min value - Max Value] current val: Value for the monitor date I have to build a Query using polleddate table or statsdata_daily table but it does not work for me i have this query: SELECT POLLID,instance,from_unixtime(ttime/1000) as Tiempo,VAL,MINVALUE,MAXVALUE, tinterval FROM OpManagerDB.statsdata_daily s where ttime >= unix_timestamp('2008-01-01 00:00:00')*1000
What does -1 mean when returned from custom WMI
Heres the data returned. "Microsoft (R) Windows Script Host Version 5.6 Copyright (C) Microsoft Corporation 1996-2001. All rights reserved. PageReadsPersec 15852354" Using... <CATEGORY ID="Memory Statistics" command="W2K3_Memory_stats.vbs" parseAll="true" ignoreLines="2" description="Monitors Windows 2003 memory Statistics"> <ENTITY ID="Memory Statistics" applyThresholdOver="Counter Value" threshold="Th6" storeValue="Counter Value" storeHistory="true" units=" " comparePreValue="false" > <PARSE token="1"
Removing saved credentials
Hi there, I notice (but have never done anything about it until now) that in my Credential Library I have a whole bunch of credentials called "SNMPCredential_x" (x = a number) that have been in OpManager7 since I upgraded from version 6. Is there a way to identify what devices are using these (eg: SQL command) and also, how do you delete them (I guess via SQL CLI again) since there's no delete button in the web GUI? Thanks and regards, Lee
Service monitors disappeared from server map overview
For some reason a few of my servers have lost the SQL record that used to appear under - servers - maps main screen. If I click on the server and go down to service monitors I have 3. Web Printers MSSQL But on the main screen I now only have Web and Printers. This might of disappeared when I moved the server out of the servers category and into a custom category but I moved the servers back into the "servers" category and some things are missing. How do I get these back ? [URL=http://imageshack.us][/URL]
Opmanager start problem
I'm also having a problem in starting Opmanager Engine Service, Please see attached log files.
Exception occured while getting graph properties for DiskUti
I've just re-install the software OpManager. For all systems I do a test of credentials and snmp and wmi pass, however, when i go to the screen shot of the pc i get no monitors and when i try to add any i get the error "Exception occured while getting graph properties for DiskUtilization" Anyone know how to fix this?
snmp trap
Hi all, anyone know how to get rid of the following, i have tried and tried and cant figure it out! 09:50:03 AM sysUpTime: 58 days, 2 hours, 49 minutes, 0 seconds. , snmpTrapOID: .1.3.6.1.6.3.1.1.5.3, ifIndex: 34, ifAdminStatus: 1, ifOperStatus: 7, .1.3.6.1.6.3.18.1.3.0: null, snmpTrapEnterprise: .1.0.8802.1.1.2.0 .1.3.6.1.4.1.3955.6.3.248.3 48 1 I am pretty new to SNMP so please be patient with me. Cheers
Is It a planned time for the end of the MSP 7 Test?
Hello, any news on the estimated time to finish this test? You spoke about february. Any estimation when?
Install problem
Just installed OpManager7, downloaded from the website this morning. When trying to start, got errors about libdbm, etc, fixed that. But now I am getting a strange one, seems like a leftover from QA team or something... root@infra2-ma:/opt/me/OpManager/apache# bin/apachectl start httpd: could not open document config file /home/kernel/satya/installed_apache/conf/httpd.conf bin/apachectl start: httpd could not be started grep for "satya" gives a few hits: root@infra2-ma:/opt/me/OpManager/apache# grep
Cannot Add Devices
HI, I'm only able to add one of my servers to Op Manager, when i try to add any others I get 'Device Not Reachable' All the servers are on the same IP network and in the same Subnet Mask. regards
step by step instruction of installation and create database
hi i want to know installation process step by step of central as well as probe and also how to communicate it with sql database too. i want to know how we can store sql database too. whether we need to install any sql software too? and we need to run any command please give me all details step by step so that i can install it.
Next Page