Link to Dashboards in Business View
Hi, I don't know if this is against your dashboard/business view concept but it would be nice if I can build links to other dashboards in a business view map. For example I have a map with all my locations. If I click on one of them I get to the dashboard and have a nice overview of the location. Is this possible, or is there any reasonable point why this is not implemented yet? Best regards Philip
"Currently the device is not monitored" - how to set this?
Hi, i have a switch that in some way is disabled of polling and not showing any alarms, but is still available in the bussines views etc - i dont know how i got it this way but i wanna add another device to this status, a switch that is currently down for repairs but will be up on the same ip in a few days , i still want to have this device in my bussines views etc etc but just as the first one, with the status "Currently the device is not monitored" and a "grey" icon in the bussines view just as
Corrupt Dashboard, CCTV, and Widget names
I have recently reinitialised our OPManager DB and the components listed in the subject have become corrupt. For example: Network Overview default dashboard now displays as: @(dashboard.name.nwoverview) Device Summary Widget displays as: @(widget.name.devicesummary) All of the Widgets and Dashboards display like this. I've uninstalled and reinstalled OPManager, but the issue remains so it looks like something has gone wrong in the database. Any advice you can provide is much appreciated. regards
AuthorizationException - Scopecriteria.... Connection object is closed
I have the latest service pack and hotfix installed. I connect to a MSSQL database. I'm getting intermitent problems such as: trying to open a business view, trying to look at a notification profile and getting "Error!", and now after restarting opmanager, the other problems seemed to disapear but after a time, I log in later and attempt to open the Alarms tab, and get: AuthorizationException occured when retrieving scopecriteria propsInvalid state, the Connection object is closed. .. Not ready
Different values between "Test monitor" and MIB Browser
Hi! I have a problem that I've never seen before. I have added some custom monitors (about one year ago). They worked fine. Yesterday I controlled them and found out that values aren't correct any more. Immediately I checked it by using your MIB Browser (the same device, the same credentials, the same OID). Then I've got values as expected (but completely different form the values returned from the custom monitor). What is wrong with this monitor? I'm adding two screenshots here so that you can see
EFI Fiery Xerox DocuColor 242
We are having trouble with printer monitoring with our Xerox DocuColor D242. it has a built in EFI Fiery. when we setup the monitoing the supply levels seam to report totaly randomly. one second it shows a toner level at 10% then it jumps to 50% then down to 3% then up to 1200%. it will do this for all supplys on the printer. any advice?
[BUG] Data files size chart for MS SQL databases
On the chart that comes up for file sizes for databases it shows the correct size on the left but under the chart the Min Max Ave and 9thPercentile numbers show something like 2.14748364737 for the size. It looks like it must be using a 32bit integer counter and cannot handle large numbers over the 2.1+ billion limit. Does the chart use an internal 32bit counter or does it use what the device shows for the counter type?
Network View Issue
I added two of our switchs... and went to network view.. it shows 23 of our networks..... the x.20.x.x subnet has links to what the core router is located but for our x.17.x.x network it shows this green link that goes off the top left of the page into the great abyss -- Is there a way to refresh or redraw that network map? I have tried to restart the app and refresh the browser cache. Thanks,
Server device type - How to manage vendor SNMP + W2003 monitoring
Dear all,We have several Dell Poweredge w2003 servers monitored with OpManager, using snmp&wmi. Issue is that depending of the device type we select : Type = Dell, vendor = Dell Inc. Type = Windows 2003, vendor = Microsoft I can add specific vendor snmp monitor or not. For example to monitor server temperature (OID .1.3.6.1.4.1.674.10892.1.700.20.1.6), I need to change server device type to 'Dell'. To add an event log rule, I need to change server device,type to 'Windows 2003'. This is not convenient,
Looking for widget for Bottom 10 as opposed to Top 10
Hi, I'd like to be able to see my "bottom 10" or "last 10" devices for CPU, RAM and drive usage, so I can see which servers are sitting idle most of the time. Is this already possible, and if not can it please be added? Thanks!
syslogs from routers
Hi, As a part of my router configuration, I would like to receive syslogs from the router and view them. I have it configured on the router side, however when i view in syslog viewer I do not see anything. Can I see these syslogs on the device snapshot page too. Is there anyway to do this. I am currently on Opmanager V8. Awaiting a response. Thanks, Renita
Schedule a monthly report for a single URL.
Hi, We monitor the availability of a number of internal, but we want to generate and schedule a monthly report for a single URL. How can I do that? Thank you, Don
Change port number - Snapshot page
Is there a way (on the device snapshot page) to change the port number that is associated with the "browse to" icon in the Tools. For example, if I use the icon from the snapshot page of one of our devices, the URL goes to http://<ipaddress>;. What we would like ideally, is to be able to change the port number on the URL to http://<ipaddress>:<port_number>;. We would like to be able to do this per device not as a global setting. Is this possible? If not, can you consider it as a feature request?
Adding the SQL Monitor to multiple servers
I have about 45 SQL servers I need to monitor. Is there a way I can add the SQL Monitor for all instances to every server at one time or must I go into each server and click the Add Monitor button and manually configure the monitor for each SQL instance? I would ask the same question about the Exchange Monitor since I also have 10 Exchange servers. They all run Exchange 2003 SP2 and could authenticate against the same DC. Can I build a template and apply it to all of them?
checking multiple servers at the same time for wim conection
Hi is there a way that i can check lets say 50 servers at the same time for wmi conneection, instead oh having to go trough one at a time?
Adam
We are having the issue where a remote office router is down, the servicing ISP reroutes the ping to an alternate (fake) IP but OpManager is not showing site (router) as down. In the ping we get a 'TTL expired in Transit' error. Any ideas on how we can get OpManager to see that the IP being returned on the ping is not the destination IP?
OpManager NetFlow Plug-In release - New features and MS SQL support
Hi, We are happy to announce that NetFlow Plug-In for OpManager with some great new features like MSSQL support, CBQoS reporting capabilities and billing functionality has been released. Users interested in this version of the NetFlow Plug-In need to upgrade their OpManager BUILD to the latest version and then upgrade the NetFlow Plug-In to the new version. CBQoS reporting allows users to track the Class Based QoS policies applied on your devices for pre and post policy traffic usage and queuing,
Errors encountered evaluating NCM and Netflow plug-in on OpManager 8022
Dear Support Team, I am running registered OpManager 8022 and had installed NCM and Netflow plug-in. When I click on the NCM link on the top-right corner, it will direct back to the OpManager login page. As for Netflow, I cant find any link from anywhere to invoke netflow. Is there any other settings required or did I missed out any steps? Thanks.
Data moving
I'm using opmanager on a win server, now i want move all data on another server windows with the same opmanager release. Is it possible migrate all data from a opmanager to another one? thanks
Router configuration
Hi, Within the router snapshot page, can I customize the router health today chart to remove buffer hits,misses and failures. I would prefer having the traffic related to certain interfaces rather than the ones mentioned earlier. I am currently on Opmanager V8. Do let me know. Thanks, Renita
IP of a certain server changing itself by magic
Hello I have a certain server who's IP is 1.2.3.5 and at random, OM7 is changing it to 1.2.3.6, which then sets off alarms. When I log into the console, I can see it's changed, I simply change it back and update the status, and it's fixed. It has done this now everyday for the last 4 days, only to this server, and always to the same wrong IP. It happens at random times during the day. We've had this stable install of OM7 for at least 2 years in various versions without a problem. Any suggestions?
ESX 3.5 snmpd.conf file
I am trying to enable monitoring of our ESX servers with OpManager. What is the standard configuration of the snmpd.conf file in ESX 3.5 to allow monitoring from OpManager? I have a 3.0 ESX server that works, but i cant see the VM's running on it.
Opmanage Wont start
Event Manager Reports the following: Event Type: Error Event Source: MySQL Event Category: None Event ID: 100 Date: 28/08/2009 Time: 13:42:11 User: N/A Computer: NET-MANAGE Description: C:\Program Files\AdventNet\ME\OpManager\ncm\bin\\..\..\mysql\bin\mysqld-nt: Incorrect information in file: '.\deviceexpert\adventneterrorcode.frm' For more information, see Help and Support Center at http://www.mysql.com.
CPU Performance graphs
Can anyone tell me why OpManager shows CPU performance graphs for some machines as 2 CPU's, when all they have is 1 hyper threaded CPU and other machines as 1 CPU, when they have 2 Quad core CPU's? Am I seeing all the CPU stats on the 2 Quad core CPU's or am I missing some CPU performance data?
Default view - back
Hello, i have several business views ... In one view I change default view to LIST VIEW and I can't BACK TO MAP view ?! I run OpManager 8022 ... Best regards, Z
Questions about OpManager 8022
Good day! 1) Unable to add device. Same issue as described here: http://forums.manageengine.com/?ftid=49000003497088 - both in 8021 and 8022 so i send my logs to support@manageendgine.com. 2) Is there any way to monitor Windows Terminal Server Sessions count? 3) Issue with adding notification by user with "admin" rights to only one view: When trying to add Notification profile with Parameter threshold - we have "access denied" instead of list of perfomance counters. 4) How to change user rights to
Router down but no alarme triggered ?
Dear all, we use OpManager for 5 years, last week, I've totally re-install my server with release 8022, an discovery again all devices from a clean database, so most of parameters are default. Last night, we had a breakdown on a wan router, I can see in the response time of this router that it did not reply to ping request for the time it was down, but no alarm had been created !!!Do you know this kind of issue ? thank you, Christophe Christophe
Crossbeam C10 Monitoring
Has anybody had any joy monitoring the interfaces on a crossbeam c10? I can view the real time but its not logging. Any suggestion would be apprecated.
Reports with OPmanager 8007
Hi, I am running the report Disk Usage by Drives and only one column/field show up (Free Space) the other columns Total Space, Used Space and used % has a NA in the field. I would like to have all these fields present with the appropriate data. How can I make this work? Thanks, Marc
Impossible to add devices in 8021
I have made a fresh installation of opmanager and it seems quite impossible to add nodes. I keep getting the following error: Entries for the device are either partially added or removed.Click [here...] to remove and readd the device I have a ms sql database and have tried to follow the tips in http://support.opmanager.com/AddSolution.sd?solID=1808 but that doesn´t seem to work for me. Regards Stefan
Server Health Report
Dear All, Please suggest how can we have All Servers in the Server Health Report. Can get only max of 8 servers in where we have more then 8 servers in OpManager. pls suggest. rgds, Saumya
event ans system logs monitoring
Hi, As a part of event log monitoring, i have selected the event logs to be monitored under the specific device. What in specific needs to be done to associate syslogs to the device. Thanks Renita
Monitor MySQL
Can OpManager monitor a MySQL database on a linux box?
Problem with Business Views
Hi I've got problems running opmanager on a 64 bit windows. most works fine except the business views. With the current release of OpManager (Build 8021) it is impossible to create new Business views (the flash plugin hangs while initializing the new Business view) or add new devices to an existing one (after a click on add device the site has to be reloaded to be responsive again). After the installation on a 32 bit windows, the creation worked, but adding of new Machines doesn't work too. Is there
changing text in trap processor
I want to change message text in trap prpcessor for linkdown trap. I know the way how I can include informations from trap(interface index, type...). But, I want to include interface description, text set with "description" command in cisco routers. I have that information in device page in opmanager(in interfaces). I tried with variables($AgentMO, $SourceMO $IF-SourceMO...) but I cannot find the way for this problem solution. Is anybody who can help ?
Unable to edit/delete credential settings with special character in name
Dear all, I've created a credential with name 'AT&T SNMP' and I cannot edit / delete it. I assume it's because character '&' is not supported (but no check when creating). How can i solve this issue ? thank you, Christophe
Editing UPS Snapshot Dials
Hi, I want to edit the dial graphs in UPS snapshot view, because we use a UPS which has no standard template in OM. I know that I can edit snapshot dials from other categories in /conf/opmanager_snapshot_dial.xml, but the UPS snapshot view is structured in another way than the other snapshots (special "UPS Status" section). My tests to integrate custom monitors as a dial graph (type=number) failed. So, can you tell me, how to configure/change/delete the dial graphs in UPS snapshot view? Best regards
Monitor/Confirm WMI is operational
We have recently experienced an issue in which a server that was previously being monitored successfully with WMI started experiencing issues getting WMI responses. The net affect was that the OPManager kept displaying the last recevied status of those monitors (ie All good). However with WMI no longer working we were not able to identify that services were infact stopped and there was no error to advise of an issue. Is there any way we can monitor that the monitors being applied to a device are
turning off a windows event log alarm
hi, i have this event log error that we keep getting every other night or so, their isnt an error and that is confirmed by microsoft, we cant shut it down from the windows server though, so i was wondering i in opmnanager can disable this event log error from triggering just like i can do with errors that has snm trap id's? the event logg error is the following, and this is the one i dont wanna trigger in opmanager ID=21 Source=VolSnap Type=1 Message=The flush and hold operation for volume D: was
Notification profile not working with only an event log alarm
Hello, We have a server where we place a notification profile based on when an event in the server's log occurs. The notification profile works when you test it but not when the server experiences the issue. The server does trigger the alarm in OpManager, but the notification profile is not triggered when the event actually occurs. Thanks for any help... LeRoy
Next Page