Message: sysUpTime.0: 16 days, 9 hours, 0 minutes, 8 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.24: 24 , ifAdminStatus.24: up , ifOperStatus.24: down ,
All, How do I keep from receiving the following Alert: Message: sysUpTime.0: 16 days, 9 hours, 0 minutes, 8 seconds. , snmpTrapOID.0: .1.3.6.1.6.3.1.1.5.3 , ifIndex.24: 24 , ifAdminStatus.24: up , ifOperStatus.24: down , .1.3.6.1.4.1.674.10895.3019 Charleston Dell Switch Ethernet Switch Device: 192.168.113.195 - Charleston Dell Switch Category: Switch Error Condition: Critical Generated at: Oct 27,2009 07:36:13 AM I have already unmanaged the ports I do not want to manage and have also remove them
URGENT: SNMP credentials stopped working
Hi, I've just noticed that all my servers stopped showing SNMP CPU and memory values. WMI is still working. I've already checked: the credentials are correct SNMP is running SNMP requests are accepted from opManager server restart of SNMP service on device doesn't help restart of opManager server doesn't help reading an SNMP-value(sysuptime) from opManager mibbrowser times out reading the same SNMP-value from another SNMP-Testprogram on the same server returns a correct value The only configuration
Does OpManager Enterprise Edition support Syslog monitoring?
HI All, Just wanted to know if OpManager Enterprise Edition supports Syslog monitoring? If so, what are the steps that need to configure on routers and on OpManager EE? Thanks, Kris
Cisco Router temparature
how to monitor the Temparature of devices.
Fan Failure in Switch
Hi, We had an embarrassing problem earlier today where a Cisco 3550 switch failed because of a fan failure. Unfortuntately Opmanager did not alert for this failure, is there anything we should do could have done to make sure we get alerted for thes type of failures in the future ?. Regards Scott
Create report for an installed software on Servers devices.
Is there a way to generate a custom report that shows all Windows Servers which has an specific software installed? E.g: I want to know which servers has the Security Update for Windows Server 2003 (KB958644) . Is it possible to do into OpManager? Thanks in advance! Regards, Gabriel Guimaraes
Error: State buffer or Stats-data files age limit exceeded.
OpManager EE support, My central server is filling up with these errors. Can you explain what this means and how to fix it? When I click on the "Central Data Folder Status" link, I get this error: "Status Message Unable to find the object : Data_State_Central". Source Central Data Folder Status Severity Critical Critical Oct 14,2009 09:34:52 AM State buffer or Stats-data files age limit exceeded. Current Age : 404 hrs 32 mins. Thresold value : 1 hrs Critical Oct 14,2009 07:34:51 AM State buffer or
How do you enable Partition Details of the Device (%) monitor in a Domain Controller?
It is simple and straight forward to do in a standard file server, but how does one do this in a domain controller? Thank you so much for you assistance.
chaning the colors of service down, server down etc etc
Hi, i want the color to be switched to red on servers ONLY if they are not responding For example, if a service is down or a treshold violated i only want it to be orange! how can i do this?
AIX process monitoring
Is there any way I can have my service monitor tab display the process path and argument instead of just the process name? I would also like my email alerts to display this information as well.
Wath is difference Between HOSTRESOURCE MIB and UCD SNMP MIB ?
wath is difference Between this items ? Monitors the CPU Utilization based on HOSTRESOURCE MIB Monitors the CPU Utilization based on UCD SNMP MIB
I'm not sure if unicode supported?
Dear all, I'm in the trial for OpManager (8024) and AppManager (9005) now. Although I can use English in my working environment, my officemates can't. Hence I need to set most of our name of devices using Traditional Chinese, that's the DISASTER... While I set the name of device to Chinese words, it displayed in the "Snapshot" screen correctly, but while I change to Dashboard, the name displayed "????", yah, how many Chinese words I used, it will sow the same times of "?" character. Besides, while
Suppressing multiple traps
Hi! My problem is as followed: One device sends multiple traps (always the same) every minute. This device is configured in OpManager that incoming traps are forwarded as a SMS. Now each minute comes up a SMS with the same message. Is it possible that OpManager only sends the first trap an suppresses the following ones if they contain the same message? I am using OpManager 8024. Kind regards, Mok
Adding additional wan links to a existing Wan RTT monitor
Hi. Is there a way to add additional ip addresses to a configured WAN Rtt monitor in OpManager?. I have a working monitor with a business view, customised map, etc and I'd like to add a couple of wan endpoints to monitor, but I don't see any option to edit the monitor, only to add a new one. I could re-create the monitor with the updated links but I want to avoid that if it's possible because I already have a lot of data collected by that monitor and i don't want to lose it only for two wan links.
Monitoring mapped drives with OpManager
We have OpManager and Central Log Server in our shop. I'm trying to monitor a windows box to ensure a mapped drive is active and not disconnected. Does anyone have a solution?
Receiving "Updates failed"
Hi! I try to set an IP address at one device which only shows 0.0.0.0 If I try to set it I am only reveiving a javascript error message "Updates failed". If I click on "Ping device" I am reveiving the right IP address but I can't fill the right value into the IP address field so it generates an error that the device isn't available. I don't want to delete the device and readd it because there are a lot of values collected which I don't want to loose. I am using OpManager 8024. Hope you can help me
View opmanager DB
How can i view the Opmanager DB? I tried the mysql -u root...........command but with no success. I would like to access the DB using MySql Administrator. grt
sql monitor, as I view the report DB size in MB, as shown in KB
sql monitor, as I view the report DB size in MB, as shown in KB. can you help me please
SMS Notification
Hi all, We have Opmanger build 8006, install on a Vmware server , running Windows server 2003. We already have a GSM gateway on our network. The question is, how do we config opmanger to send a sms via our gateway (NOT the sms modem attached) when there is a fault ? I thinked about use "run a program" notification profile to connect to gsm gateway via a script, but dont know how to send the content. Plz help me a solution for this. Thanks.
Device Monitor for Juniper SSG Firewalls not working
Hi, I'm evaluating OPManager, and I'm experiencing some issues like: CPU Utilization, Memory Utilization ,Active Connection Count don't work well. When I discover the device, it categorize the firewalls as Desktops and I have to change them to Firewall manually. After that, OPManager seems to don't get information to the monitor, and only start getting infos if I apply a trick: I change the type to switch, and them I change again to Firewall. After that I get the informations correctly, but I did
Can I name a device with a UTF8 name, such as Chinese, Japanese names ?
I am using OpManager 7(7105). Currently i try to name a device a Chinese name but i got some shit.
The device addition fails.
Our company,We are using Opmanager8.2 now. The watch device is registered with six servers already. Though we add two servers newly,we received messages which number of devices exceeds permissible limit of 10 devices. Why does such a message appear? How can I add the two servers? We will wait for the answer. My best regards.
Opmanager 7 threshold traffic utilization switch
Hi, i would like to know how can i set the threshold to traffic utilization for switches in Opmanager 7? I tried the following 1 - admin - > Interface Template - > Ethernet - > and configure a value of 90%, but when it arrive at 40 % alarm Could someone help me with it? Thanks, Alex.
Linux Installation via commandline
Folks, Could someone point me to the installation doc for Linux without GUI? I don't have X installed on the server, just command line. I've tried to run ./ManageEngine_OpManager.bin -console, but that did not work... I have sun-java6-jdk installed, and I see Sun Java JVM starting, but then it drops back to the command prompt, with no error message whatsoever. I am running Ubuntu 8.04 server. Thanks you. Paul
Service Desk / Netflow Integration
We currently have OpManager, NetFlow and ServiceDesk running in our network. Opmanager has indicated it's able to integrate with the other two programs, however, each program is resident on a separate server. Is there a way to integrate them in this scenario?
Router Response Time N/A
Hi, We have a router that's currently displaying Response Time: N/A, as well as packet loss: N/A. This router is pingable, we can tracert,connect, do everything via Opmanager, (Availability, Memory and CPU usage are displaying correctly) and the credentials are correct. Anyone else come across this and have an idea as to the cause/fix? **Bumping this due to total and utter lack of response*
adding router in opmanager
When I go to routers page in OpManager and want to add router for monitoring, I can add router by name or IP address. Than I can choose netmask for IP address. But I can not choose netmask 255.255.255.255. Last netmask in the list is 255.255.255.252. Because of that I cannot choose loopback address as router IP(my loopback have netmask 255.255.255.255). I want to know what is the reason for that situation, will choosing netmask 255.255.255.255 be posibility in some future OpManager versions? Thanks
WAN RTT Monitor
Hi, I am having difficulty in getting this to work. On the limited documentation that is available form you, and how Op Manager implements this. According to your Doc it states that 12.3 or later will be fine. Yet i am running version Cisco IOS Software, 7301 Software (C7301-BOOT-M), Version 12.4(13c), RELEASE SOFTWARE (fc2). And for love or money i cannot get it to work, SNMP is configured correctly with RW community etc. Any idea`s ? I have this feature for over a year now and have never been
Backup
IS there ANY way of setting up an automatic backup schedule like there is with Service Desk??
MS Exchange 2007 Cluster monitoring fails
Dear support, We are running MS Exchange 2007 SCC on Windows 2008 Failover cluster. Individual nodes are working fine with OpManager but resource monitor can't get the information from Exchange Cluster. Any suggestions?
Error after installing manage engine
I just installed Manage Engine OpManager to test it out and during the installation I was prompted that port 80 was already in use and was asked to specify an alternate port. Port 8060 was recommended. I accepted the recommended alternate port and rebooted but now when I try to access the web portal (http://localhost:8060/LoginPage.do) I get an "500 Internal Server Error" and a message to check the server logs. Checking the server logs I see the following errors in the TomCat logs: [Sat Oct 17 00:44:31
Opmanager Multi - Catagorize
Hi there, I have added a whole subnet of servers/network devices to my opmanager install and it has dumped most if not all of them into the 'Desktops' Catagorey I have had a hunt around but cannot find a way to mass move them into the servers catagorey other than manually opening each device and changing it from Desktop to Server Is there an easier way to do this?
Creating a 2nd operational Server Infrastructure View.
Hello, Opmanager Build number 7100 (Windows) We are monitoring so many Windows Servers that I would like to start creating additional Infrastructure Views to separate them, instead of all of them being in the Server View. Whenever I try to make a new Infrastructure View (for example "Servers 2) the functionality of any device i place in the new View is very limited. You cannot configure it like you could if it were in the built in Server Infrastructure View. Is what I'm trying to do not possible?
Change Syslog Protocol From UDP to TCP
How TO change OpManager Syslog Configuration Protocol from UDP to TCP. For Receive or view Syslog Message From TCP Portocol ??? I have send my syslog message by TCP protocol to OpManager syslog server And view from SyslogViewer.
OpManager
License Type : Professional Build Number : 8007 Expires on : Never Maximum no of Devices : Unlimited Hello, I was wondering a couple of things: 1. Is there a way to include the IP of a device being monitored in the notifications that get sent from OpManager? I have looked into it and can't find a way to add that variable to a notification. 2. When generating reports, graphs seems to loose granularity (less points per graph) as the time increases in this case we'll use bandwidth utilization as an
Migrate OpManager Instance from Windows to Linux?
Hi. Sorry if this has already been discussed, but is there a way to migrate an instance of OpManager from a Windows server to Linux (specifically, I usually use Ubuntu, but whatever)? Thanks. steven
Fixing OpManager to ServiceDesk Integration/Connection errors
Not sure if this will work for everyone.... Error: Unable to fetch values from ServiceDesk Plus, The server might not be running or the network traffic may be too high This I think is a generic error that something is wrong with one or more of the parameters you have specified. 1. Make sure you have completed the standard configuration: http://www.manageengine.com/products/service-desk/opmanager-integration.html and that you get the above error. 2. Check that you can load up the client (web browser)
OpManager for iphone?
I know this was talked about earlier this year, is it available? If not when will it be?
Disk Usage widget not showing domain controllers
Hi, I have a "Volumes with most Disk Usage" widget, and even though my domain controllers have the disk usage monitors, they do not show up on the top 10 list.
BATs backup the OPM
what is the difference between the BATs: BackupConfFiles.bat = ? BackupDB.bat = Full backup BackupDB_Config.bat = ? BackupDB_Mysql.bat = ? BackupDB_MysqlConfig.bat = ? RestoreDB.bat = Make restore the OPM
Next Page