about "Rediscover Now"
Dear All, I had monitored some remote server, these servers didn't set SNMP before. Now I got the right, install and set SNMP agent in them. then I changeed the credential ticket(test passed), I hoped the addtional information(CPU, mem and HD usage) for those existing systems would be collected. But after one day, I didn't see the addtional informaiton. So I try to "Rediscover Now", I got some correct information for the server(such as Sys Desc. Type etc.). but I still can't get the information
Issue with Opmanager 8040
Since updating Opmanager to 8040 the schedule reports have stop working. This happened a while ago where the clases folder was sent to correct this problem. Please can you resolve this issue asap.
After the Upgrade of Opmanager 8 to SP4
After installing the SP4 my Domain controllers have problems with the CPU monitoring. The CPU Utilization is using the SNMP OID: AD.OS.Total.PercentProcessorTime in stead of SNMP OID: .1.3.6.1.2.1.25.3.3.1.2. That means that i always receive error because the total is around 100% and not the current 1% How can i solve this
Unable to monitor the server even WMI/SNMP
I'm testing OpManager for my company if used for network monitoring... but I'm fail to monitor the server even WMMI/SNMP... 1) Vista Server 2) XP PC (Installed OpManager 8.0) (Running in same Workgroup instead of Domain) On Vista server, I've enabled SNMP service, Setting: Logon tab - acount set on "Network Service" Trap tab - added Community "public" Security tab - added Community "public" and added XP PC IP on "Accept SNMP packets from these hosts" On XP PC, OpManger, I can monitor the Vista server
OPmanager, Alerting sending SMS to ISDN Modem on USB
I have a AVM FritzCard ISDN Modem, connected to USB on the Server. I want to send SMS Alerts to this AVM-ISDN-Modem. The Modem uses Dial-Up to our SMS Provider. The USB uses no COM Port - it's a USB Port. The way to send Mail to generate a SMS uses the Internet. Internet is not the best way to send Alerts ... And i don't want to connect a GSM Phone to the Server, because is in the basement of the building with no GSM Signal there. Is there a way to config this ?
BUG on Service pack4 !!!
I install Service Pack 4 why i can not create Perfomance Monitor ?
Alarms are not clearing on their own
I have two devices that have alarms stating they are down but I have tested both within opmanager using the Ping tool and they both are active but the alarms will not clear by itself. Thanks, Joe
Upgrade OpManager to latest 8040
Dear Support, I am currently running Opmanager 7027 and would like to upgrade to the latest build# 8040. The AMS purchased initially together with Opmanager 6 license had expired. Can I continue to download and upgrade to the latest version? Does upgrading require a valid AMS? Thanks.
UPS monitoring
Hi forum. How do I get OpManager to show details of my monitored UPS? (see screenshot) It's an Eaton Powerware 9305 30KVA.
OpManager v8.4 - What's new?
Hi, Where is the changelog or what's new page for OpManager? I am not able to find it. I really want to know what features added, bug fixed, and so on. Only release notes are available and I think it is for v8.3 Thanks.
8030
Hello, we have OpManager v8025 ... it's work fine ... Like service, with Apache server ... But, we upgrade to v8030, and ManageEngine disappeared from list of services ... Apache server to ... We start OpManager from batch file, like service ... but new version uses TomCat server, not apache ... How we can change settings properly ? WEB access dosn't work ... Best regards, Z
Sending emails to Opmanager for control
Any chance you'll add some control over Opmanager via email? I'd like the option to suppress alarms by replying to an Opmanager email alert. Either that or the ability to access Opmanager via my Blackberry.
Supporting Modems
I am not sure why OpManager has been developed to support only a small number of modems/mobile devices. I have a Blackberry that I am trying to connect via USB. The com port has been registered in Windows, but OpManager is telling me that it is not connected properly.
OpManager 8030
Is there a place where I can read what will be coming with 8030?
OpManager 8.3 upgrade - issues
Hi, After upgrading to OpManager 8.3 I found some issues: 1. Legend/Units does not show for "number" graphs in the snapshot page. See the attached OpManager_8_3_router_snapshot.png. 2. No networks are show in Maps - Network Views after discovery of networks when starting from an empty database, but nodes are added as expected. 3. Monitoring Interval for e.g. Windows 2003 is set to 5 minutes during discovery, even if the device template has been change to 1 minute prior to the discovery. See the attached
OpManager and certificate
We publised opmanager to the outside world but now evenry time a connect i get an certificate problem. Is there a simple solutions for solving this problem? We would like to use our own certificates but i dont know how i can configure it with Apache. Can anybody help me with this please?
I don't see Cpu utilization in op8 by ssh
hi i'm trying to test monitor linux servers by ssh. And i found the cpu utilization shows no response,but the disk utilization and memory utilization show correctly. When i test the certificate passed,you can see the annex. please tell me how i can do? thanks
CISCO HSRP
I have downloaded CISCO HSRP MIB and copied it to /MIB folder , but although I manged to get HSRP state from my CISCO 6509 using MIB browser , the custom monitor I have created using the same OID is returing an error
phone ip addresses
is it possible to change the ip address of my pc to the ip address of a cell phone?
false alarms in the latest build 8030
Gents, I see some more false alarms in this build. I didn't have these alarms in the 8025. Do you have the similar issue ?
Monitor of Cisco2801 doesn't work
Opmanager 8 Build 8024 dicover my Cisco Router 2801 Correct! Find Interface corret! All monitor respond in MIBBrowser! CPU Memory etc... But don't display CPU, Memory , temp and interface usage! Help Please! Regards, []'s Lauri Zancanaro
Recent allarms in Snapshots
Hi, Since upgrading to version 8 (now in 8030) i have noticed that when I add a new device (router or switch) the interfaces seen during the discovery as down are seen as down and do not trigger an allarm. In this case I have interfaces on the switch or router which are down during discovery and i am not aware that they are down. Is this a normal behaviour? How can i re-enable the notification of these interfaces? Thanks and Very Merry Xmas! Razvan Despa
Opmanager 8.3 opens Web client automatically on server reboot.
Build 8024 Opmanager opens the web client automatically on server reboot. I have OPManager installed as a service and I want it to run automatically, however I do not want the web client to automatically open on the Windows desktop every time I reboot the server. Currrently it sits at the Opmanager logon prompt after each reboot. This server has other roles installed on it, so I would like to only open the web client when I click on the desktop icon. How can I resolve this behavior, the previous
OpManager and NetFlow Plug-In 7200
Hi, install Manageengine_opmanager_netflow_plug-in_7200.exe in Opmagager have line "Netflow of plugin build is not up to date" one of points there is "Click Browse and select the ppm file present under /netflow/ppm/6201 directory" but I do not have this directory where I can take necessary ppm??? OpManager 8.0 SP 0.3.0
openssl issue in Opmanager 8
I have the follow error when I ran Comodo Hacker Guardian for PCI requirement. I am using https:// with port 8080. The server is running to the current patch. Do you have any solution for me? Error: Security hole found on port/service "general/tcp" Plugin: "COMODO OpenSSL version Priority: "Medium Priority" - OpenSSL version is out of date. An off-by-one error in the DTLS implementation in OpenSSL 0.9.8 before 0.9.8f allows remote attachkers to execute arbitrary code. Solution: upgrade to the
No data avaliable for SW Cisco
Dear helpdesk , I was setup Opmanager , i monitor SW Cisco 2960 & 3560 but don't have any information in Interface monitor , in Rx Traffic Tx Traffic Errors just N/Aand i can see real time this interface of SW , if i click in this interface , just information No Avaliable How can i fix it ?
OpManager Distributed Edition Hotfix 7501 released
Dear OpManager Distributed Edition Customers, Season Greetings !! We are extremely delighted to announce the release of the OpManager DE hotfix 7501 which has enhancements & several issues addressed.You can follow the instructions to take a backup and then apply this hotfix by clicking on this HOTFIX LINK The HIGHLIGHTS of Hotfix 7501 are Enhancements: Increased client responsiveness Support for automatic DB reconnection Reporting granularity set to be in sync with data cleanup interval SDP integration
Monitoring file age in build 8030
When monitoring the file age (using the file monitor in build 8030), Opmanager uses the file creation time to trigger alerts. We would like to monitor the modified time of a file. I.e. Opmanager should send an alert if the file hasn't been modified for 30 minutes. Is this possible?
SD plus and Opmanager not linking
Running SD+ Enterprise v 7.6 build 7601 and Opmanager build 8025 When I click on jump to Opmanager in SD the link does not work. When I click on device Info>asset details in Opmanger again I get an error.
Alerting via Twitter and MORE! Now available in OpManager 8.3 - Upgrade Now!
Hi Guys, We are very happy to announce the release of the much awaited OpManager 8.3 Service pack, build 8030 today. Loads of new interesting features are added along with a few feature enhancements. Please find the list below. OpManager now alerts via Twitter Direct Messages. Option to access OpManager webclient using Iphone and Blackberry user interfaces. Provision to add custom WMI monitors. OpManager now supports 64-bit Operating System. File and folder monitoring for Windows devices. A new network
Linux server acting as router
Hi, I have two linux (RH) boxes acting as router in a WAN to connect 2 subnets, I'm evaluating opmanager and would like to know how can they be configured so I can monitor link status. Thanks in advance
Removing Process Monitors in 8030
Hi! I've updated my OpManager Version to 8030. After I restarted the server a view process monitors went to "unavailable". Unfortunately I am not able to delete them. I'm not able to delete any of them no matter if the process monitor is up or down. Hint: I've added the same process monitor again and saw a difference between the old and the new ones. The old one gets his data over SNMP the new one over WMI. (but I still can't delete any of them) Also all the process monitors on our domain controller
How to do a scheduled dump
Hi! I just want to know how I can do a scheduled mysql dump of the OpManager DB. I'd like to do that once a week. I've already found the bat-files in "OpManager/bin/backup/*.*" I thougt I could call the batch files with windows task scheduler. Is that possible? What do I have to consider? Is there a special sequence? Hope for your help ... Kind regards, Mok
Businiss View
Dear All, I tried Creating a new businss view all things are ok I add the needed device in the drawing area but when creating link between devices there is a problem when the two device linked has TWO Links or more I can't draw the two link its allow me only to draw one link, how I can fix this problem Regards AhmadM
OpmanagerTwitterprofiletable does not exists
after upgrade opmanager 8030 i get OpmanagerTwitterprofiletable does not exists when try to backup database
Select multiple services for "Services by Availability" dashboard widget
Just a suggestion, but would it be feasible to enable users to select more than one service to monitor on the "Services by Availability" widget? For example, I have set up a dashboard to display information just for SQL Servers. These SQL Servers don't all use the same port, so when setting up the "Service Monitors" on the individual server pages, I have had to create multiple services - i.e. MSSQL1234, MSSQL2345, MSSQL3456 etc to represent the different port numbers. It would be nice to be able
disable ssl
Hi, how to disable ssl in Opmanager 8??? OS: RedHat 7.3
Modules Link 1 pixel high...
Hi, We are having an issue with the "Modules : Netflow Modules | VoIP Monitors | WAN RTT Monitors " Links on top of the Opmanager window. The only way to click the link is to mouse over the _ of each link, which are hidden until we mouse over it. I checked in "\webclient\common\css\commonstyles.css" and changed the line .netflowStrip { filter:progid:DXImageTransform.Microsoft.AlphaImageLoader(enabled=true, sizingMethod=scale src='/webclient/common/images/bg.png'); padding-left: 10px; padding-right:
Opmanager service gone
Hi, After upgrading to 8030 the opmanager service is gone for me. I can start the application with startopmanager.bat but I really need it as a service. How can I do to readd it again? Also after the upgrade the cpu, memory and disk utilization graphs doesn´t show up. Regards Stefan
[File/Folder monitor] Changing the collapsed panel behavior
Hi, Tought of putting this in a new post, since they are "Categorised". As these 2 new type of monitor "Edit window" uses collapsing panels, I would be interresting, when editing, to automatically uncollapse the configured panels, not always the top one, because if I enter a monitor I didnt setup, or I setupped a long time ago, I will have to open all the panels anyway to see what's configured and what's not. If the panel has all default values, it could be closed. If not, open it so I can see
Next Page