Temperature for Cisco devices.
I notice that there are no monitors associated with the cisco devices that I discover. Eg. Cisco Router 1841. I would like to know how I can obtain the MIB/OID to monitor the temperature. Please kindly assist or advice. Thank you very much. Cheers, Andy
Exchange active user account?
My Exchange dashboard view active user account only show N/A but other info is ok.Did i need to enable something to get the value?
Partition Details of the Device(%) not working
I am unable to get the partition details working for any of my servers. Disk space used and free, both in MB and GB is working fine, as well as any other WMI counter. I am currently running OpManager 8 build #8723. The DB was migrated to a new MSSQL server and the OpManager server was migrated to new virtual hardware, following the migraton steps outlined here. Anything that is known that is going wrong? -Chris
Using Gmail for Notification in OpManager
Is there a way to use gmail as the notification server since my company does not have MS Exchange?
WMI failing in UI but not on command line
I'm trying to set up WMI monitoring on my Windows 2003 & 2008 servers. Credentials for WMI test successfully, but when I try to test the monitor I get "The Monitor did not respond to the test request". However, when I run "cscript cpu.vbs <hostname> <credentials>" from the command line of the OpManager server it works perfectly. This is not just one or two servers too, this is all of them I can't get a single WMI monitor to work. All firewalls are disabled and OpManager version is 8723, Any ideas?
Not properly detecting SQL Server on Virtual Device
When OpManager detected my Virtual Guests, some of them are MSSQL servers. OpManager does not however display all the counters associated with SQL Server, opting instead to display the Virtual Device counters. Is there a way to get these counters displayed? Thanks! -Chris
How to show the particular device's icon image in List View?
Hi All How to show the particular device's icon image in List View? Our device type has a like 'Juniper' and Juniper.png image is stored in <OPM Home>\webclient\common\images\dhtmlTree folder. And then, I restarted OPM Server. However, this device's icon image is unknown. Thank you in advance. Ko Young Suk.,
Opman Notification
Is there a way for Opman when sending text emails to Phones or SMS messages i think they call it, to have them all appear in on thread for a single issue, like the trouble and clear all be in one thread vs having separate? It seems to generate way more message strings than necessary. -Jeremy Mayfield
No data for CPU Utilization (Linux) - CLI
Hi, CPU utilization for Linux server using CLI does not return any value. Looking at HostResource.xml file, the command to get the CPU utilization value under "Linux" poll is top b n 1 | grep 'CPU[0-9]* states:'. I run this command directly in the server also doesnt have any value. Therefore, i guess this command need to change to cater the actual value. -- Regards, Anandharaj System Engineer (Unix / Linux)
Email Alerts Not Working
I am on Opmanager Version 8723 and when servers or equipment miss polls I never receive an email alert even though I have it setup in the notification profile. Thoughts?
Top Interfaces by Traffic Rate?
Hello friends! I am need to have Top Interfaces by Traffic rate in my Dash board.. How can i do it?? Currently the options available are allowing me to only add interface by Bandwdith (which means interface banwith like 1G, 100mbps etc) or Total traffic count. I just need to have top interfaces by their current traffic rate.. any ideas??
Professional Noob here! please help me :(
Hello i buyed the opmanager professional version but i am not able to make it work :( ...i followed the tutorials but not able to grasp anything i did what the tutorial asked me to do..i entered the ip of my own pc to see if the software works but nothing happens. it shows discovering devices, it gets the name of my pc but not able to show processes, software installed and all. memory and disk utlization graphs dont work. i started the SNMP service in my windows 7 32 bit edition but then also no
Known issues
Hi Gabriel, Can your team provide an area of this forum for use only as a list of "known issues" and solutions in whatever is the current version of Opmanager? There are a number of issues that have happened or continue to happen in 8720 and 8721: Corrupt threshold.conf resulting in lost thresholds Vmotion causes notification profiles to be deleted High cpu in java.exe caused by cscript.exe High memory usage caused by java.exe Multiple instances of a server in list view Gaps in reporting, missing
Customizing look of alert emails
Is there a way to change the look of the alert email generated by the monitoring software. If possible I would like to have two separate styles. The current one generates a title, message, and alarm details with a link to the login page for OpManager. What I would like is to be able to send the default email to the IT Staff, but also customize a second style of email for the others that would be notified of any network errors such as office heads and supervisors. Where are the files used to generate
Customize the calendar
To be able to customize the calendar in the report section to choose the days ex: be able to customize availability report for a period of time excluding holidays and only working hours are there (5 days).
Problems with siemens tc35i
Hi His it possible to connect siemens tc35i with opmanager for sms gateway? If so how to do it ? Because i have always this error "Modem is not connected properly. Check your settings!" But i can access it with putty. Thanks Rui Barquina
Problem added link
It happens to me with some equipment on my network, when I insert the link between two devices shoot me one of the two equipment. How can I fix this? thanks
Is there any agent required for op manager to monitor client performance?
Does op manager need an agent installed on the client server to monitor disk space, memory utilization etc?
Software management pack to add to your SCOM 2007 environment
OPManager is running in my company for past one year. As a part of NMS consolidation project we require software management pack that we can add to our SCOM 2007 environment, just as Solarwinds is now supporting. Kindly acknowledge by when this pack would be available to integrate OPManager in our SCOM?
Graph SNMP OID over time in OpManager
We have OpManager 8, and we would like to produce graphs of certain SNMP OID values over time. These are Cisco MIBS, beyond the standard CPU/Memory graphing that is already built in. I uploaded the MIBs to OpManager, and I am able to manually do a GET on the OID from the MIB Browser, and it returns the value as expected, but this is a one time thing. Is it possible to have OpManager poll the OID every X seconds/minutes and graph it over a period of hours/days? Even better would be if we could
SNMP Question - Traps vs Non Traps
I am trying to monitor certain information via SNMP.. Specifically: Temperature Fan Status I have found a MIB for Compaq servers (CPQHLTH.MIB Compaq Server Health information) that is able to pull this information.. However, I can only seem to add them as "traps". In the OpManager MIBBrowser I can actually get the temperature but I don't see how I can add that as something I monitor.. I guess what I'm confused about is how some SNMP things are listed in the "Add Monitor" section whereas all the
MSSQL Monitor Configure
i set up MSSQL Server, and i start SNMP Agent, WMI, and MSSQL Agent Service, but when i dircovery this serrver , in MSSQL Server Snapshot i dont see MSSQL Monitor as demo? i dont know what i wrong
Professional Noob Here :( please help me in using opmanager
Hello i buyed the opmanager professional version but i am not able to make it work :( ...i followed the tutorials but not able to grasp anything i did what the tutorial asked me to do..i entered the ip of my own pc to see if the software works but nothing happens. it shows discovering devices, it gets the name of my pc but not able to show processes, software installed and all. memory and disk utlization graphs dont work. i started the SNMP service in my windows 7 32 bit edition but then also no
URL Monitor Question/Idea
Is there any simple way to configure a URL monitor to alert/alarm when a configured URL becomes available? We'd like to be able to monitor specific URLs and when they become available send an alert.
WMI permissions not working
I am trying to setup a user for polling WMI information from servers, without having to be a domain admin. I am testing on a 2003 R2 and 2008 server. I have not been able to pull the WMI information from the server, event though I have granted all permissions for the root\cimv2 namespace. it will work as the domain admin, but not another user. Any ideas?
Disable VM autodiscovery?
Hi How do you disable automatic discovery of recently created VMs? Thanks Kevin
Volumes with most Disk Usage
I am trying to change the default threshold monitor values so that my graph colurs are not all red on disk that are ok but over 80% used. Any ideas on how to do this Thanks
Opmanger trial
Hi, I would like to download the installcleanup.zip of OpManager to totally remove my old OpManger, I can't upgrade my trial version form version 6 to the new version. Is there any download for that file?
Event Log rule - add thresholds
Hello, Running Opmgr 8723. When adding an event log rule, add functionality so that if a certain event occurs say 10 times within 15 minutes, fire an alert. Thanks!
New Dialer
Is there any procedure to create new Dialer under OpManager for any particular device?
Frequency of URL Monitor notifications
My URL monitor will send an email when during an error state, and will send an email once the error is cleared. Is there a way to make the monitor send an error every hour during an error state?
Opmanager Login Error - SQLException, Invalid State
Hi Support, I'm getting this error on the login screen to Opmanager. I am on the latest version #8721 and am running on SQL 2008 server. If i reboot my Opmanager server, then i can log in again. If i try and restart the Opmanger service, the service hangs and i am forced to reboot. SQLException while preparing the statement with id : 25 Cause : Invalid state, the Connection object is closed. SQL Query : select * from UserPasswordTable SQLException while preparing the statement with id : 25 Cause
java.exe stops be responsive
Running latest patch. on WIndows 2003 and running latest java.exe. Seems java.exe stops being responsive, if I end the process a new process is started and then Opmanager starts monitoring again. When java.exe is unresponsive I can still access the webpage but much is not working. I saw in another post there is a fix for java.exe in Feb2011 but not sure who I am suppose to contact? Sun or Adventnet. please provide me the fix for the java.exe issue. thanks
Email based sms profiles
I have tried to set up this alert function but when I receive the sms I do not get detailed info. Instead I get something like this: Server down (What server??) Message: The server is down for the past 3 hours (OK thats fine) The pending alarms as on :Sat Apr 02 06:59:29 EST 2011 (OK date and time) Category: Server (OK its a server) Severity: Crit (OK its critical) I would like to know what am I doing wrong or haven't setup properly to get the device name that is having the issue and possible what
Juniper m7i
Hi Support, we would like to monitor juniper m7i... could you help us to make template, so we can use that template to monitor our device juniper m7i BR, Rian@prodata.co.id
OpManager database migration
Dear All I am currently trying to migrate the back-end database for OpManager from the current server (SQL2000) to a new SQL2008. However when i run the DBConfiguration.bat to change the DBhost setting i receive the following error message "No Driver Jar is found", can someone explain to me how i can resolve the issue? Thanks in advance
Dircovery device
When i use Dircovery device feature, opmanager dircovery my laptop but my lap is in unknow group? why? And i want to know how preconfigure , SNMP protocol?
SSH/CLI Timeout/Gauges not showing properly
Hello All - I was wondering how I could go about chaging the default CLI timeout values. I am running into an issue where I can use the "test" button for a CLI/SSH monitor, however, more often than not the gauge is simply not displaying. So I know my credentials are correct and the monitor itself works. Thanks, Jason
I've
Hi, I've just installed OpManager as i'm looking at purchasing a network monitoring system. At the minute i've just dived in feet first and working my way around. I've got the majority of my network on but what i'm struggling with is alerts, more specifically the setting up of the SMS modem. I have a USB gprs modem attached to my op manager server which reports that it is correctly installed onto com3. When I enter my mobile number and com3 into opmanager and submit, I get a message saying that
OpManager don't alarm when the routers are offline (I'am from Brazil)
I'm having a problem in OpManager. Added terminal equipment, routers and switches. But when I try to ping the routers OpManager complains that the router is still online. That is when the router goes offline OpManager not tell me. Can you help me please. English may not be good because I'm from Brazil and I'm using google translator. Thanks. I await answers.
Next Page