Bandwidth notification profile
Hello everyone, I hope have what will be a simple question. Currently we have one notification profile for all our routers. It alerts us if there is a bandwidth overuse, the device misses 1 poll, or there is a problem on the interfaces. My boss wants to put the bandwidth notification as a separate instance. That way when it happens the subject will say "Bandwidth overuse". I've created a separate profile, but it doesn't seem to work. I have set to notify when any selected threshold is violated. But
Monitore all interface on router usins NetFlow
hi i use opmanager and i have netflow plug in i have cisco with more than one interface, i would like to know how can i monitor all interfaces traffic using netflow plug in. i tried to configure all interface but in router page its display only one interface withe green circle that telling me netflow is enable. http://www.m5zn.com/uploads2/2011/8/15/photo/081511040810f1bhfg6iy9pt6317ot.jpg thanks
Bug in the NCM plugin
Dont know if anyone has seen this behavior. In the NCM plugin we have our devices set to monitor for change management through the syslog. We typically go in and mark unauthorized changes (changes made outside of the NCM) as authorized in a review period. The NCM module will kick the user out and go back to the login interface for OpManager after authorizing three dates. You can sign back in, do three more and it will kick you out again. I am using the latest version of both OpManager and
Cisco MIB 4510R-E
Do Somebody has the Catalyst 4510R-E MIB´s? I'm having trouble to monitoring it and i need those MIB to see if my problem get solved; or anybody of you have resolved this issue? Thnx N' Rgrds!
Feature Request: Display system uptime in snapshot page
Hi All, Im requesting to display system uptime in device snapshot page - probably in "device details" / "device info" section. -- Regards, Anandharaj System Engineer (Unix / Linux)
WMI for OpManager on Linux
Is there any word on making WMI available to OpManager Linux installations?
Additions
Capacity Planning Peak usage reporting Trending capabilities
output format email
Hello, Gabriel! What about my topic ? https://forums.manageengine.com/#Topic/49000005214031
custom reports.
Hi All, We have been requested to generate 2 reports from opmanager. These reports are similar to what you are able to generate in opmamager already. However the formatting that you get them in is incorrect. We need a 1 line for each machine report. eg. Current report. -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* Server name. Drive Letter | Space Used (GB)| Space Free (GB) | Total Space (GB) | -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-* What we want. -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Repeat notifications until clear?
Hi, is it possible to repeat a notification until it is clear? For example, send email notification of a service down every 24 hours until cleared automatically or by admin?
Phantom device in Opmanager - unable to delete
I have a device that keeps reporting in my alarm tap ever few minutes as being down. When I click on this device, opmanager says it does not exist. The server is actually gone. I went ahead and quickly created a server with the same name to see if I can add it and then remove from opmanager. Still did not work. I also noticed if you hover over the name, let's say is called "server1" , with the mouse, a balloon would pop out and say is "server2" I went I head and tried finding server2 and it did not
OPmanger 8811 how to adjust Exchange mailbox stores
If i setup Exchange server 2007 for first type it will ask me to add mail store file names. After the setup how can you adjust the mail store file names. I have 5 storage groups. The mail store files are not in default folder they are in storage group named directory. How do you state it in OP Manager
SVC MIB Manage Engine
I am trying to load the attached MIB file to the Manage engine probe inorder to monitor our SVC cluster. The following error is reported on the probe during selection of the MIB: Error parsing MIB:SVC_MIB MIB Contents follow below: IBM-SVC-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, enterprises FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- RFC2571 ibm2145TSVE MODULE-IDENTITY
Removing interfaces from multiple devices
Hi, I would like to remove several interfaces from multiple devices monitored by OpManager. Is there a way to do this in bulk, or do i have to go to each device and select and remove the interfaces manually. Ideally i dont want to monitor any interfaces on the devices anymore, i just want to monitor the device so i can reduce the resources used by Opmanager. Is there a way to do this. Thanks
SNMP traps from Cisco wlc 5508
Hello! I have a Cisco wireless controller (5508). This box is sending snmp traps to OPmanager. I want these traps to generate alarms in opmanager when ap's go down. One alarm for each ap. So far so Good. I get this to work with one ap but if several ap's goes down there still be only one alarm (for the last ap that go down). I am using the mib airespace-wireless-mib and use the bsnapDisassociated and bnsapassociated traps to do this. How can i use this traps to understand that it is different ap's
Setting up SNMP trap from nortel bcm 50
hello, I'm trying to do the initial setup for op manager. I have added a snmp trap destinatino on the nortel bcm name: nortel host address: Ip where op manager is hosted port: 162 snmp version: v1/v2c community string: read I've uploaded and added the mibs to op manager but when I send a test alarm from my BCM .. nothing is showing up in op manager? Am I missing something in the configuration. We are just using the trial version to see if this product will work for us.
change the output format email
Hello! Is it possible to change the output format email notification that sends an email to SMS? Namely, change Content-Type to text/plain or remove from the message body Subject: $message Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_3_25047450.1312994887640" X-Antivirus: avast! (VPS 110810-0, 10.08.2011), Outbound message X-Antivirus-Status: Clean X-Spam: Not detected X-Mras: Ok ------=_Part_3_25047450.1312994887640 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding:
Hyper-V monitoring: Preview release
Hi All, We are pleased to announce the availability of OpManager HyperV Monitoring preview release . To cater the growing needs of virtualized environment, we released our enhanced VMware monitoring recently. In addition to it, we have been working on HyperV monitoring module for quite sometime and it has come out in good shape. Please fill this form if you are interested in testing this preview release and sending your valuable feedback and suggestions. You will be getting a mail with the download
TRAP SNMP
Hi, I can't see any traps in unsollicited view. - Traps are received on OpManager server (check with tcpdump) - I can See traps with trapViewer on OpManager server (AdventNet MibBrowser) - SNMP Trace service is up on OpManager server - The device sending traps is managed in OpManager - I Got no snmp trap processor What's wrong? is there any log? how to configure the community string in OpManager server and make sure the traps is set to accept from any host? Thanks
Monitor Physical and PageFile memory at the same time?
Any idea how can i monitor the Memory utilization for the Pagefile and Pysichal memory at the same time?
Difficulty setting up Windows service notification profiles
Anyone notice how difficult it is to setup a notification profile for Windows services, or am I just doing it wrong. I have all of my services that I want to monitor, already being monitored, however when I want to setup a notification profile for this server, I have to go through and pick the services I want to monitor, from a list. This wouldnt be so bad except the fact that they are not listed ALPHABETICALLY. What a PAIN! I have been able to work around it by using an alarm escalation profile,
./RepairDB.sh: line 16: myisamchk: command not found
op manger is not running and it is showing to run teh repair.db i run that one it showing the error ./RepairDB.sh: line 16: myisamchk: command not found any one can help on this
Starting AdventNet WebNMS "Primary" Server Modules, please wait Process : DBServer [ FAILED ]
can any one guide for this error ASAP an dmy os is ubuntu
OpManager not scanning after backup loaded
We are running version 8723 and are having a problem. After we reloaded a previous backup (using only the config backup) OpManager will no longer scan all of the network devices for status. The only one it looks like it usually scans after loading is the closes router (which all other devices depend upon). But that router is up and snmp data is being pulled. Is there any way to refresh or force OpManager to start scanning.
DNS name not display
I have 750 devices being monitored by OPmanager ver 8723. However, some of the devices only display the IP address and some display the DNS name. How to resolve this issue..? regards, anathan
SYS-ADMIN - opmanger not reporting xxx-xxx-xxx disk space correctly
Hi, We have an issue with OpManager reporting 120% disk usage. ie setting 200% as the total size. It is monitoring a 10Tb HDD is this a bug? Is there a fix for this at all? Thank, Andy
OP Manager 8 showing wrong Memory utilization and Disk usage information
Hi all, MY OP Manager 8 showing wrong Memory utilization and Disk usage information of windows base Hyper V machines. If i manually check memory utilization of servers then they show different values and OP manager showing other values. Your Prompt response will highly appreciated. Regards, Arshad Khan
Process Monitor
Hello, I am trying out OpManager and I am using the process monitor but wondered if there are any actions it can take when a process is say, high on CPU? Menaing, when the threshold is detected on CPU on a particular process could it say, reboot the machine? Kill the process? -Wes
add-on Active Directory Monitoring
how to add Active Directory monitoring, because i have add 5 license (MSSQL,Exchange,Active Directory, and 2 more), for MSSQL and Exchange that feature can be showing but not with active directory, can somebody help me, thanks.
Monitor CPU and Memory on Foundry MLX-4
Hi, I can not see the monitors CPU and memory on my Foundry MLX-4. When I add them, do not appear on the list. So I created a new monitor but I can not put it on dial-graphs. Could you help me?
I dont able to take OP manager 8 backup
Hey, I am using OP manager 8 and i dont able to backup of my data using mention bellow steps. Start menu -> Programs ->OP Manager -> Data Maintenance -> Backup. An error is come and log is generated in backup folder, I am attaching this log so kindly look into it and do the needful. Regards, Arshad Khan
unable to install Probe in OP manager
i has install OP manager but im not able to install Probe. Can someone assist me on how to install the Probe ?
New Business view stuck at "Initializing Business View"
Hi. I have issue with the New Business view. It just keep on loading at "Initializing Business View", i been waiting for more then 30 minutes and nothing appear . Anyone have this kinda issue? I need help. Thanks Regards George Low
Device Template OID already associated
I am trying to create device Templates, I created a Template for Win2003 Web Server and now I am trying to Create a device Template for Win2003 DB server. Problem is, when I try and create the WIn2003 DB server template and query for the OID it indicates "System OID .1.3.6.1.4.1.microsoft.software.1.3.1.2 is already associated to the device package". Of course the OID's are the same as the machine types are the same however the templates have different data being monitored. DB servers monitor different
trap parser
Hi I have a problem with parser for trap from xmedius fax server (INTERSTAR -MIB) I was made Trap processor config but when trap received I got "No Trap Parser defined for received trap:.." Can anyone have some idea to solve this issue. tnx Ivan
How do you add CLI monitors to Device Templates?
Solaris template doesn't list the CLI monitors, so can't add them by default to all hosts. http://opmanager:8080/admin/AddDeviceTypeForm.do?operationmode=modify&typeid=165&operation=MAIN Want to be able to select the CLI monitors listed at http://opmanager:8080/map/addMonitors.do?requestid=SHOW_LIST&deviceName=uk2utvssinf005-sec.mfil.local&category=Server&moID=3584&type=Solaris&monitorName=Performance&vendorName=Sun Microsystems To the Solaris template so that every Solaris box added inherits
WAN RTT suppot IPSLA tests such as HTTP, TCP connect and so on??
Hi WAN RTT suppot IPSLA tests such as HTTP, TCP connect and so on??
OpManager monitor Exchange Mailbox stroe.
Dear all, Can we monitor the Exchange maibox store status whne it's mount or dismount ? Yusri
ManageEngine AssetExplorer Agent use port 443 will breake the IIS or Apache HTTPS connection
Dear all, As subject, this agent will use the port 443 on managed server. Will this break the IIS or Apache HTTPS connection? Our engineer report the oulook webaceess on Exchange server been broken by OpsAgent. Could any one have solution for this please? Many thanks. Regards
Can not add 1 ESX server
Good afternoon. We have 4 ESX servers. At all the same credentials. 3 ESX servers added with no problems in the monitoring system (OpManager, Build 8811). After adding a fourth server I get a notice that it is successfully added, but not on the list. Can you please tell how can I fix it?
Next Page