Domain controller category
Hi, In OPManager 9.2 (9200) Domain controllers are still are category on the same level as virtual devices. However our domain controllers are virtual devices themselves too.
OpManager with Firefox
Hi, For some reason the Business views don't get displayed with Firefox. OpManager version is 9200 and firefox version 16.0.2. I also have the latest flash plugin installed. On IE it works fine Regards,
Widget : missing device - Last N hours traffic
Hello, Few of my devices (firewalls, servers, ...) are missing in the drop-down list when I want to add a widget "Last N hours traffic" in a CCTV dashboard. I have 2 fortigate firewalls configured the same way (fortigate, snmp v1). In SNAPSHOT page : both show interfaces, RX/TX, ... values (interface tab). But only 1 appear in the drop down list of CCTV Dashboard WIDGETS. 1 firewall device appears in widget but not the other: The missing one in Wigdets is this one : I already have restarted OPManager
Problem(s) in setting criteria for a notification profile
Hi, We're using opmanager v9200. If I open up the editor 'Edit Criteria for Profile ...' and want to select an option like "When any ... URL is down" the application says: No URL monitors have been added for this device. If I try to the option "When any ... Windows Service is down" I get an unusable list of windows services that aren't being monitored on the device. I won't get the same error message like above: No URL monitors.... Some of the Windows services listed are even non-existent in our
Opmanager Device Licenses
Hi, I am monitoring a vmware host and it has a guest server that is also a domain controller. If I set the guest to be a domain controler does that use one or 2 device licenses? Thanks Steve
OpManager - Many False Positive Alerts and Delayed Positive Alerts
We have been demoing out OpManager 9 for the last couple weeks and the setup looks ok. However, I frequently receive SMS messages (sometimes 30 at a time) that state: Attention - Host name Message: Device not responding: Probably down or busy Device - Host name Category - server/router/etc. Error Condition: Attention If I check the status of these hosts, even immediately after receiving these alerts, I can ping, SMB, RDP or SSH these devices just fine. On the opposite end, we did have an outage
Stuck in maintenance mode
I set a downtime schedule a couple days ago for some maintenance we had to do on a group of servers in the Downtime Scheduler. After the maintenance window closed, I deleted the schedule so no one would enable it later. I discovered later that the servers that were listed in the schedule are still showing "On maintenance" and the Service and Windows Service Monitors are listed as down. I removed and re-added the monitors and did a rediscover/update status, but it still shows as "on maintenance".
Automated method to disable interface monitoring
We are looking for a way to dynamically assess whether an interface up/down alert (or any interface alert, for that matter) is worth sending to the NOC. For example, if a link to a server gets saturated or goes down, we don't really care, but we do care if an uplink or other critical link is saturated or goes down. We would like an automated way to turn on/off interface monitoring using a script or tool without having to search for the device, find the interface, click configure, and disable the
The file that you have specified is not compatible with this product
This is what I get when I'm trying to install the hotfix to move to build 9010.
OPMANAGER - Configuring Mail Server
Hi friends, I´m facing a problem with this configuration where I´m trying to configure a gmail account and I receive the following error: 530 5.7.0 Must issue a STARTTLS command first. u27sm677683yba.21 I´ve tried many ways to do this but was not positive. Can you help me with this? Thanks for your attention!
Problem getting data from 3Com 4200G switches
Discovery worked and I get some data from the switch (interfaces list and I typically get some packet loss and response time data), but I don't get any CPU, Memory or Bandwidth data. I added a monitor after searching for the proper OID for CPU ratio, but the widgets don't report at all.
OM keeps failing with Process : OpManagerProcess [ FAILED ]
Hello, support. I am evaluating the OM running on a Linux server. I use a dedicated mysql server. After the installation, everytime I started OM it gets this error. I deleted all the OM tables, then started up again. the error just won't go away. I can't scan my networks for snmp-enabled devices. It just did not discover any device. If I tried adding a device manually, it said it's not reachable even though the device is pingable from the OM server. I turned off the host FW on the OM as well. I had
How to login to Opmanager MySQL DB from a remote machine?
How to login to Opmanager MySQL DB from a remote machine? i am getting an error as below while trying to connect. ERROR 1045 (28000): Access denied for user 'root'@'ABMLCHEOPMGVS01' (using password: NO)
"Alert if Threshold is violated XXX time(s) consecutive
Hi, I think that this parameter doesn't work after applying 7024. The first time the value reaches the threshold, it sends the alert notification, even the number of times is >1. Thanks. Miquel
Dashboard Question
I have a question about the dashboards. Most of my devices are in the Virtualization section. I notice that when creating a dashboard with a widget such as Last Polled Value of CPU Utilization that it doesn't include ANY devices from the Virtualization category and only from the Server category. What I am trying to accomplish is aggregate several machines from different categories for a single metric such as CPU Utilization onto one dashboard. I can't find any way to do this, does anyone else know
OPManager: SQL Server 2008 R2 cluster support
Hi, i was wondering if SQL Server 2008 R2 cluster is supported. Thank you
OM lost network connectivity error
Hello, I see this error about once a week, and I have to restart the OM services in order to get everything functioning again: OpManager has detected that it has lost network connectivity and has suspended all monitoring. Monitoring will be automatically resumed once connectivity is established. Any ideas on why this keeps happening? -- Cody
OpManager don't sends mails
Hi all, i moved the complete OpManager manually from a damaged server to a new one. Everything seems to be ok, but OpManager don't send mail anymore. Mailserver settings are ok and from this server i can send mail by using Outlook. Can anybode help? Thanks Jens
Report
report to accomplish the same historical returns only 75 days, how to solve this problem. Thank you.
network traffic of server with multiple ip not monitored properly
Hi, I have a linux server with multiple ip addresses bind to the same ethernet card. However, opmanager is only showing traffic from only one of the ip. Please see attached screen capture. Notice only one of the eth0-eth0 in the list has a green status and the real time traffic link is blue (i.e. not disabled). I was expecting the traffic for each ip address is monitored.
Unable to start mysql daemon
Hi I've installed Opmanager on RHEL5 but when I try to run the StartOpmanagerServer.sh script I get the following: Unable to start Mysql daemon Unable to create database Exiting OpManager. Starting mysql manually and then running this script produces the same error. Can you help? Dave
"Foreing chars" in custom WMI monitor
If the host system is "localized" (russian for example) when creating custom WMI monitor and trying to obtain list of host WMI classes we get broken encoding. It seems to be that host returns UNICODE strings and OpManager represent them as non-unicode. Host system are Windows 2008 r2 Std RUS, 2003 r2 Std RUS. So it seems to be common problem for all custom WMI monitors.
Multiple Email ID's in Notification Profile not working with MS Exchange
I am using Opmanager 9 Build 9200 and I have configured a notification profile with multiple email id's. If I separate the email id's with comma, mails are not getting delivered since we are using Microsoft Exchange. I think in Microsoft Exchange we have to separate the email id's with semi colon. If I separate the email id's with semi colon I am getting the attached error while giving Test Actions. Let me know how I can resolve this.
Install Manage Enginee Product in MySQL Enterprise
If possible install products of Manage Enginee en different instance. I want install MYSQL Enterprise With tools. Thank you. Best Regards.
Removal of Multiple VMware Hosts
Afternoon, I am looking for a quick way to remove a number of ESX hosts from one of my OpManager Probes but there does not seem to be an obvious way to do this - can anyone please assist? Thanks, Scott.
IPAM Plugin - cant add subnets or routers
Using IPAM Plugin for opmanager build 9200 Cannot add router/switch or subnets manually via import or csv. Add button is greyed out on each option. Is there something i am missing here about functionality? I understand OpUtils is a seperate product, but do i have to purchase OpUtils enterprise edition to use the plugin? or is something wrong with my installation?
event log or monitor to check non-domain computers that connect to network
Has anyone come up with a way to have OpManager alert if a non-domain computer connects to the network? I know the computer gets a DHCP address for one, but not sure if i can trigger on that.
Interface Graph Reports
Is there a way to get a report showing graphs for certain switch ports? Had a quick look around and can't see a way to select certain interfaces and if I generate a report on all interfaces I only get the first 100 odd rows even though I've select 'Show all'.
Blank Wrapper Consoler
Hi, After installing OpManager & clicking on Finish button. Two windows opened. Readme & one more command line window (wrapper console ID 1846741). The wrapper console is blank & is like that for 20mins & more. Please advice what do i do next to run OpManager.
Downtime Widget not Accurate
I have 2 widgets. 1. "Devices by Downtime" 2. "URLs by Downtime" We had some servers down for 15hrs recently. If the widgets are set to "Last 24 hours" it gives the correct downtime. 15 hours + If I set the widgets to "Last 30 days" they instantly were only down for 8 hours. Is their a reason why this is happening? Thanks, Shawn
Switch Port Mapper
Mine hasn't worked in forever. Long before OpManager 9. When I put in the switch IP and our router or domain controller it doesn't give me the connected devices like it had before. I was wondering if I'm missing something. It gives me the ports, speed, and whether they are up and thats it. Thanks, Shawn
IPV6 support on Opmanager
Hi Does Opmanager support IPv6? Can it run on IPv6 Only network? Thank you
SNMP value manipulation in OpManager
Hi, Just wondering if there is any way to manipulate the data returned from an SNMP query? I’ve had a look around but have not been able to find anything. For example, our UPS’s (Liebert NXR) return values with a multiplier of 10; as such OpManager currently reports 12000W for a 1200W input. It would also be handy to be able to convert degF to degC. The other thing we would like to do is combine SNMP queries into a single ‘monitor’. For example, we would like to combine all 3 power phase wattages
SNMP Timeout / The OID may not have been implemented in the MIB.
The Monitor did not respond to the test request Summary Device Name XXXXXXXXXXX Monitor Name Disk Average Read Queue Length Protocol SNMP OID .1.3.6.1.4.1.9600.1.1.1.1.8 Possible reasons 1. Check if SNMP is enabled on this device. 2. The SNMP request might have timed out 3. The OID may not have been implemented in the MIB. 4. The device might be down The server is an IBM running Windows Server 2008 R2. I have tried to locate the OID in the MibBrowser, but I am unable to do so. I do get
Revamp the web interface
Hi, would you think about a complete revamp of the web interface? The actual is quite old and really not attractive for the customers. I have customers that think the Solarwinds interface is more attractive. Thanks.
Configuring notification profiles
Hi, When I try to configure a notification profile, specifically the option to set which services trigger the notification the pop-up window which show the available services is too small and cannot be resized neither a scroll bar, making it impossible to select all available services. It is fixed however with turning on "compatibility view". Using OPM 9200 and IE9
Regarding add laload custom oid using SNMP
Hi I have problem regarding custom oid graph using SNMP. I can creating custom monitors and add to custom oid .1.3.6.1.4.1.2021.10.1.3.1(laload) snmpwalk status is ok but contents of laload graph are not displayed. Would you please any advice me.... Regards.
No Trap Parser defined for received trap
Hello, I'm trying to receive readable traps from our Aruba 3200 Wireless controller. I've already loaded every MIB file I could find related to this controller. I've added the MIB files to the MIBSTOBELOADED.CONF file, but somehow the traps are still unreadable. See screenshot. How can I get the traps to appear in readable text instead of OID and Variable Bindings values? Regards, Aico
Create trap processor for VMware power off/on virtual machine
Hi, I'm receiving a lot of unsolicited traps for virtual machines that are powering on and off on 5 of my VDI hosts. I'm trying to create a trap processor for them, but I don't know which OID to use. I've loaded all of the VMWare MIBS I could find, but I'm still not able to create a decent processor. The message that is appearing is something like: The Virtual machine "machinename" on host "esx hostname" is powered on. Any ideas? Best regards, Aico
OpManager - Installing to Demo but No Option to Specify DB Instance?
Installing latest version of OpManager on Windows Server 2008 R2 64-bit, and I'm confused as to why I cannot specify a MSSQL instance on install? Hostname will not allow instance to be specified, and there is no option to use Named Instance similar to other ManageEngine products. Confused what to do here, as most enterprise database servers have more than one instance!
Next Page