SNMP Mibs
hi,we are using Op manager in our institute,Op manager requires a specific SNMP mibs for our computers DELL, HP, Lenovo, however am facing a problem in getting these mibs ? can someone provide me with these mibs ?
How to monitoring MikroTik Devices?? Performance Monitors
Hi all! I have many MikroTik RB750 devices. But default MIB and DeviceTemplate of Opmanager can monitoring only Availability, Response Time, and ports in device. How to monitoring CPU, Memory and other Performance Monitors of router???
Edit MSSQL Monitors
Hi! I'm new to OpManager, but I am truly impressed. However, I have a problem - on the MSSQL servers I have added, I have experienced that some of the services has been down in OpManager, but not on the server itself. Is there a way to edit the Consecutive Times for the MSSQL Services, under MSSQL Monitors? Best regards Nicki Kristensen
3Com SuperStack 3 4200
Does anyone monitor 3Com SuperStack 3 4200 switches successfully? Having trouble finding a good MIB and OID list for monitoring... When I query the device it returns SysOID:.1.3.6.1.4.1.a3Com.generic.27.4.1.2.11
Dell PowerConnect MIB's
We want to monitor our network better than we do at the moment. To achive that, I want to create new Device Template and upload the devices corresponding MIB tables. However, I don't know how to handle the MIB files of Dell. I attached the ZIP file which containts the MIB files. The ZIP file containts multiple MIB files. I was expecting to receive only one MIB file and link this file to a new template. I don't know how to connect the right mib files to the right template. How should I read these
how to add device withou snmp to template
Hello. I want to manage a wireless lan adaptor which is WLI-TX4-AG300N. However, it's not in the list of default device templates. So I want to add the templates, but to do so, I need to have sysOID. I don't really know what it is, so I want to use query for it, but for query I have to have snmp authentification. How can I get the sysOID for the device? If anyone knows how, please help me! Thank you.
Cisco IOS XE
Some new Cisco hardware has multiple images for the different modules installed. I don't believe OpManager has the capability to monitor a specific image within one of these Cisco devices (for example, the Catalyst 3850). Can you please include this in a future update? I don't know if this link would be useful to you. It's called the "Cisco Enhanced Image MIB": http://www.cisco.com/en/US/docs/ios-xml/ios/snmp/configuration/xe-3se/3850/nm-snmp-enh-image-mib.html
Juniper EX3200 Monitoring - MIB/OID question
Hi support, I am trying to monitor Juniper EX3200 and probings are strange. Memory is always 99% and interface traffic is not correct. I believe I do not monitor it correctly. Here is what I have in device template. System OID=.1.3.6.1.4.1.juniperMIB.jnxProducts.1.1.2.30 CPU .1.3.6.1.4.1.2636.3.1.13.1.8 Memory Utilization .1.3.6.1.4.1.2636.3.1.13.1.12 I cannot find OID for them. These are automatically populated after I add 1.3.6.1.4.1.2636 Here is what I had done. I downloaded https://www.juniper.net/techpubs/en_US/release-independent/junos/mibs/mibs.html.
WMI/CLI Monitoring with Custom Template
I'm having a problem getting my custom templates using WMI/CLI for performance monitoring. I want to create a secondary Windows 2008 R2 template for a group of servers that have different Performance Monitor thresholds than what I currently have set for built in template. As mentioned in previous thread, the template name begins with Windows, and Microsoft is set as the vendor. WMI credential test passes, and I can use WMI for process monitoring. Windows Service monitors are available. But using
Custom SNMP Monitor for Memory Status
Hi I would like to ad a custom SNMP Monitor to check the memory Status. I already have this implemented, but now I also see the status of the memory banks, that are not filled. How can I only check for the memory that is installed and not for the empty ones? **** memModuleStatus.0:-->ok(3) memModuleStatus.1:-->ok(3) memModuleStatus.2:-->ok(3) memModuleStatus.3:-->ok(3) memModuleStatus.4:-->ok(3) memModuleStatus.5:-->ok(3) memModuleStatus.6:-->not-available(4) memModuleStatus.7:-->not-available(4)
need device template of websense V10000 g2
please provide device template of websense V10000 g2
Device template for APC Metered PDU (AP7932)
I have downloaded the latest powernet408.mib and installed it. Does anyone have a device template for APC's AP7932 rPDU?
WMI credentials to devices using custom templates
Hi, In order to properly manage all my servers i have created 2 Server templates (Servers Dell and Servers HP) including standard monitoring (CPU, Memory, Disk Utilization, etc.) adding particular monitors for the vendor hardware. I cannot add the WMI credentials to the servers using the Custom templates. I cannot add in the Dashboard (the WMI list is empty). Also through the Credentials assignment doesn't work. This is also the reason for which i cannot add Windows Services to the servers in these
Unable to import IMB for Synology Diskstation
Hi, I have a problem importing the MIB that comes with our DiskStation. Any help to get this working would be great, thanks! The MIB-files are included. Regards, /André
Temperature & Humidity Need two places after decimal.
I am trying to get the temperature and humidity values from RIM 600, Environment Monitoring tool. The values are successfully picked up, but are rounded off. Is there a way to get the temperature as 23.50 rather than just 23 ? Thanks, Jejin
Add Description to instance for a custom snmp monitor
Hi is there a way to add a description to the instance for a custom snmp monitor. Else it is a bit difficulte to find out,which instance is which device.
AKCP SensorProbe Template
Has anyone had any luck with the AKCP Sensor Probes? I have it setup and created custom monitors for it, but I had to create 8 seperate monitors, I was wondering if there was a way to have a single monitor that would pull all temp date. Looking more to add the temp table to a widget on dashboard. Thanks in advance.
Monitiring EMC iOmega storage
I have some storage - EMC iOmega StorCenter ix2-200 it setup settings: SNMP user, password, SNMP_broker also i have it MIB. How i can monitoring this device in OpManager??
[ask]OpManager template for BlueCoat PacketShaper
dear OpManager team, do you have template for BlueCoat PacketShaper (3500, 7500, etc)? all i can found at OpManager is only template for BlueCoat ProxySG and i couldn't find any on BlueCoat PacketShaper template. i want to monitor traffic for each configured class at the PacketShaper. thanks..
Cisco B Channel configuration
On Auto discovery of a Cisco Device with Voice E1's or T1's the B-Channels are monitored, this does not really make sense as Voice call by definition goes up and down all the time. You can go and remove all the B-Channels from being managed but on many E1's that’s a bit of pain. Is there an easier way to stop B-Channels being picked up in Auto discovery? Kind Regards, Tim
Monitoring Liebert UPS
Hi, I am using OP Manager 9 and want to monitor my 20KVA Emerson Liebert UPS but OPM graphs dont show me any data where as credential tests are successful. Kindly give any idea regarding the same. Regards, Arshad
Adding New vendors name Ruckus under Wireless category
presently its showing under unknown, how to specifically categories under Ruckus vendor. Thanks.
Virtual devices vs servers
Hey I have imported 3 of my 12 ESXi servers, and have gotten the virtual servers imported. Then i have moved my Exchange 2010 servers to "exchange", which caused the Exchange server object to be moved to "servers" instead. Is there a trade off, if I move all the servers (virtual devices) into servers instead ? Just so I have them all collected in one panel view....
Cisco Small Business SG500X-24p Switch
All, I have tried to get the Cisco SG500X-24P switch recognized by OpManager, but I am having no success. I have downloaded the mibs from the Cisco website, copied them to the opManager mibs directory. I have tried using the mib browser in the admin section of OpManager with no success. Does anyone have a template that I can import as I have had no success creating my own. Thanks
Avaya 56XX series switches
HI...Are there any plans to release device templates for the Avaya 5650 and 5698 switches, I have tried to imprt the MIB from Avaya but with no joy.
Device Templates for SG300-28
Hi Can anyone share the device template for adding Cisco Small Business switch SG300-28 seriesto OpManager? when added to OpManager it gets detected as "Cisco Device" rather than specific device and CPU, Memory is not being monitored. Txs Sanjeev
need Device Profile for F5 6900
We wish OpManager can have device profile for 6900. But it couldn't. There is a device profile for F5 6800. But the CPU utilization, memory utilization are incorrect. We are using OpManager version 9200. Regards, Toai
Cisco Catalyst 2960 and 3560 categorized as Router and Cisco Device
Hi, the customer has several Cisco Catalyst 2960 and 3560 switches. I discovered them using OpManager version 10. All of them have been discovered as "Router" and "Cisco Device". This is a mistake... The bigger problem now is that I need to open the routers list, check each device one by one to see if it is a Catalyst and change the template. ONE BY ONE. Could you fix this problem and, may be, enhance a little the discovering process and the whole templates list? It is outdated, incompleted, some
MF-AGENT.mib
Hi, Has someone a working template for Citrix? I stuck with the MF-Agent.mib. Also has someone the barracude template (spam 400) working? Jef
Check Point Firewall and OpM
Has anyone set OpM up to monitor Check Point Firewalls? I cannot get the credentials to authenticate and I cannot figure out what I am doing wrong. I have Check Point 71.30 running on IBM servers running SPLAT 2.6. Check point is a HA cluster and there is one management server. Thank you,
Monitors Category missing based on Device Templates
Hi, In order to properly manage all my servers i have created 2 Server templates (Servers Dell and Servers HP) including standard monitoring (CPU, Memory, Disk Utilization, etc.) adding particular monitors for the vendor hardware. I just discovered that in the dashboard of these servers i'm missing some category of monitors: Windows Service Monitors; File Monitors; Folder Monitors; How can i add the Windows Service Monitors category so i can add the monitoring of specific services? Below are the
A monitor with same name already exists
Hi to all, I need to create a lot of custom monitors for icmp messages, UDP datagrams, etc. for all devices i'm monitoring. How can I obtain this behaviour? If I create a custom monitor for a device template, I can use it again only on same vendor templates. If I try to create same custom monitor on a different vendor template (not scalable approach) I obtain an error like this "A monitor with the same name already exists. Provide a different name". I'm using last OpManager 64bit version on Windows
SNMP and WMI
My environment machines have mixed this with WMI and SNMP. I am wanting to use the DeviceTemplate and standardize the monitors. I want to know if I put in DeviceTemplate both types of monitors SNMP and WMI, I want if I put these two monitors I'll have some kind of problem? Conflict for example.
Remove all default device templates in Opmanager
Hi guys, I see that OpManager comes with 650 default device templates. Is there a way that I can remove all of these and then start over with my own device tempaltes? There is the option to delete them individually, this will take some time and I would prefer a one click method that can do this. Thanks~!
Error adding performance monitior - manual or templates
Manually added monitor to domain controller, monitor was for used space and free space. Have 29 Domain controllers but only 7 out of the 29 have the correct monitors. op manager version 9.2 This error is from a manual performance monitor add. These are Virtual machine running off VMware These are a mix of Windows 2008 Standard and R2 domain controllers. Any help would be great.
Opmanager - Templates not appling
op manager version 9.2 Under the category Domain controllers I have 29 servers I am wanting to modify the template that is attached to them "AD domain controllers" to add in a performance monitior for used disc space and free disc space. I can make the change to the correct template and it say it applied successfully, but the new performance monitors are not applied, any ideas, let me know if further info, explanation is required.
Template AD and Exchange
Hi, I have two AD servers and two Exchange servers. Is there a template for AD and Exchange? I need to adjust threshoulds and want to do once? Tiago Toledo - Bigode Blog: http://www.pastelariadigital.com.br
Unable to open the Windows 2008 R2 device template
I'm trying to add a custom OID for Windows 2008 R2 servers, but when I open "Device Templates" and click on the built-in Windows 2008 R2 device template, it just reloads the page. I can open Windows 2008 and all the other Windows templates, but just not Windows 2008 R2. I'm running build 9410. Thanks
HP 3500 Switch CPU, Memory, Backplane guages
The gauges on our HP 3500 switches are just showing no data available. All of the other information pulls correctly on the switches. the little gauges just do not populate. What can we do to get them to work? They're specific model number is J8693A. If we click below on the actual monitors they are pulling the correct CPU and memory utilization and graphing them. Just the main page is the only problem.
ZyXel Templates
Hi, does anybody have templates for ZyXel equipment? GS2108 G ES2200 IES1248 IES2000 IES5000 ZyWall 5 ZyWall 2
Next Page