how to get disk utilization chart on linux servers?
I can't seem to get the pie chart to work with the linux servers. I have been testing the monitor and it fails but if I do an snmpwalk manually for that oid it works just fine. Any idea why its failing?
APC PDU Outlet Status
the following entry in the POWERNET MIB: .1.3.6.1.4.1.318.1.1.12.3.5.1.1.4 shows the status of all 24 outlets on the PDU i can use the instance (e.g .1.3.6.1.4.1.318.1.1.12.3.5.1.1.4.1) to get the status for outlet one which is either OutletStatusOn(1) or OutletStatusOff(2) my question is this: i want to monitor all 24 outlets on this PDU for a change. For Example if outlet 2 is currently off then gets turned on i would like an alert to that effect as well as the reverse if it is on then goes off
Maps>Network Views>Networks Map Always Gives "Sorry! An error occured"
Pls see attached image...
OpManager Billing versus Netflow Analyzer?
I notice that OpManager has Bandwidth Billing functions, are these the same as what's in the Netflow Analyzer product or more enhanced or less? we are looking for a single solution to manage IPAM, Network and Bandwidth Billing for our clients ideally a single solution would be good but i couldnt see any IPAM function in OpManager so im assuming we need to use OpUtils and Netflow Analyzer themselves, which we have already been informed cant tie into each other?
Which is best Practice? Installing the OpManager on a Physical Machine or on a VM
Hi, Which is the best practice? we have installed OpManager on a Windows 2008 machine which is physical server, if at all we want to move it to the virtual machine were in we have ESX 4.1 will there be any changes. Will this work fine as a physical server. Please advice. Thanks, Chetan Krishna
How to set a snmp monitor to get a value calculated from two oids?
for exmaple: 1.3.6.1.4.1.123456.1 means total number of the value. 1.3.6.1.4.1.123456.2 is the current value. I wannor create a monitor to get the value like this: (1.3.6.1.4.1.123456.2 * 100 / 1.3.6.1.4.1.123456.1) Or I can create two monitors to get values of those two oids separately. and then, how to set the config file to show the value (1.3.6.1.4.1.123456.2 * 100 / 1.3.6.1.4.1.123456.1) in the snapshot dial.
Added Support for:
Equallogic SAN Devices APC PDU Outlet Status Monitoring I would also like to see where we can design snapshot pages or at least choose what metrics show up on them. thanks!
Status Message Unable to fetch Managed Object details for the object : xxx
Hello, we use OpManager Version 8720. Today we added a VMWare ESxi 4 Server to OpManager. After changing the IP-Adresses of the Virtual-Machines running on that VMWare server, we are not able to see the details of any of those virtual-machines. We always got the Message: Unable to fetch Managed Object details for the objec: xxx Even deleting and readding the VMWare-Server and its Virtual-Machines did not help. Our Database is on Microsoft SQL Server and we run DBRepair without any success. Can you
Monitor DHCP on Cisco Router
Hi, Did anyone found any solution to monitor the DHCP pools running in CISCO Routers? I am mostly interested in the percent or free IP of the total number of available IP. Thanks and Regards, Razvan Despa
Question regarding URL Monitoring (Javascript)
Hi, I have a question regarding URL Monitoring. I want to monitor a Webinterface for a Citrix Client. I want to know if its available or not. The problem when i use the URL Monitoring is, it wont receive the real page because it cant translate javascript. The page read by OPManager is a standard "Javascript is not installed" Error Page. Is there a possibility to enable Javascript for OPManager or an other known workaround? Kind Regards Karsten Werner
Unable to unmanage Fibre switch ports
I set up snmp monitor for Brocade Fibre switch and removed all ports not being used but Opmanager keeps showing alerts from those ports. I had remove them from Monitor and Interfaces through unmanaging the ports already. Does any one come acroos this one and have a solution ?
APC PDU Support
I would like to monitor our PDU's and set alarms for if outlets are on or off and things of that nature. How could i go about doing this?
OpManager with more than 4000 Devices
I need to create an OpManager configuration with over 4000 Devices, so i will like to know which considerations or recommendations you can give me from the technical point of view for that amount of data. Thanks and regards.
Monitoring CPU, RAM And HD AS400 Servers.
Hello: Please can help us with the following case: We are currently working with OPManager Essential 8720 about Windows Server 2003 Standard. We are monitoring some servers AS400 V5R4M0, we have the following drawbacks: OpManager can´t detect the consumption of the CPU, RAM and Disk Utilization of the AS400 server. However, try with "MIB Browser" the RAM memory consumption by through the MIB "HOST-RESOURCES-MIB" appears the following: Test CPU. Test RAM. If the result is 5 values, OpManager also
Generate Custom CLI For Data Base HP-UX
Hi: Please can you help me with the following case: We are monitoring some HP-UX servers. These servers are installed one data base. I generate a script on the server so that by typing the command: $ sh /home/mprebel/shells/listener_monitor.sh;tail -1 lista_ora.txt| cut -c 1-2 Throw the state (If it is up or down) or the availability of the data base. For example: If the database is up, the result is "OK". If the data base is down, the result is "TN". The help that I ask is, can you please help
OpManager DE error deleting device
Hi, using OpManager DE and manually added a device, that was not discovered properly; eventually I deleted it, and now i cannot add it, Entries for the device are either partially added or removed.Click [here...] to remove and readd the device No matter what I do - RepairDB.bat, wizard ( it does not show anymore but i cannot add it ) stopped and restarted probe service both probe and CS ... manually remove from db ?
vmware ESX monitoring
Hi all, We have sent a request (and followed up) to support and sales but have not had a response so i thought I would post here as well. We have just implemented VMWare ESX in our environment and would like to be able to monitor them with our current OpManger server. I'm planning on upgrading to the SP2 release tomorrow night and would like to find out how we can support the VMware ESX monitoring add-on? We have not yet purchased the add-on but wanted to first find out licensing restrictions and
CISCO IPS Monitoring In OPManager
How to monitor Cisco IPS using opManger
Compare to IPSwitch WhatsUp
I currently run IPSwitch What's Up and it has worked ok but am looking to see if they are now lagging behind in feature set. Anyone have any experience with both and have some comments? Thanks.
Custom SNMP monitor
I need to have a monitor for "total connections" to CISO ASA 5500 series Firewall device. I went to Monitors->Performance Monitors and selected Add Monitor. Could not found a template for this option. Then after I went to New Monitor from Admin ->Device Templates->New Monitor. I could not found a value OID for this. Could any one tell me which OID and MIB I should use.
OpManager PPT slides
Hi anyone has powerpoint slides for OpManager product presentation to share ? Thanks Po
email alerts
I am running the latest version of opmanager and its all running well, i have set up email alerts on various issues when they arise, only problem is i get emails all night telling me that every site is down, although when i check there are no alarms and nothing in the logs, so why am i getting these emails, usually constant from about 1:30 am untill 7am then it all clears....., and nothing in logs and no alarms during this period... any ideas? Mike
Custom OIDs / DD-WRT Router
I am trying to monitor a router with DD-WRT firmware. The OIDs that I need to use cant be found in any of the MIBs found in OpManager's MIB browser. The maker of this firmware does not provide a MIB database that I can use within OpManager. So my question is, how do I add these OIDs to OpManager so i can use them? See example below (some of the dd-wrt oids are similar to linux oids, for example for memory info - but they have a .101 at the end whereas linux oids don't therefore I can't use the
OpManager 8721 unable to remove and rediscover device
Hello, I know this sort of problem has been addressed many times in the forums, but I cannot locate a recent post that relates to OpManager 8.7. I am having ongoing problems with the rediscovery of a certain host. Originally the device was added as a custom device. We then rediscovered it as an ESX server with virtual devices using the new functionality in OpManager 8.7. Subsequently the device was deleted and then rediscovered as a standard Linux server. Herein lies the problem. I now get one
Canopy Motorola.
Gentlemen, good afternoon, 1 - I can not to add them to the Motorola Canopy Device could help me. 2 - after he took out a device, I try to add the same IP and gives error. Where could remove him physically? Thank you
Opmanager 8 starting issue on Fedora Core 11
Dear All, today i've tried to setup opmanager 8 on a fedora core 11 linux flavor. everything went well till the moment of starting opmanger. done: cd /opt/AdventNet/ME/OpManager/bin ./StartOpManagerServer.sh and the output is the following: # ./StartOpManagerServer.sh Java Home /opt/AdventNet/ME/OpManager/jre Cannot resolve hostname. Using localhost by default This evaluation copy is valid for 29 days inside addon check Created table Schedule Created table ObjectTypes ...............................................
How do RSS Feeds for Alarms work?
I've setup my Outlook client to receive the feed from OpManager to keep me up-to-date on the alarms, but I only have a single initial Clear alarm showing up from when I first set it up - however there are more alarms displaying in OpManager. We're using the Free Edition (at least until I can get approval), build number 8720.
Serveurs en double dans la liste
Bonjour à tous, j'ai des serveurs qui sont en double, voir en triple dans ma liste...comment remédier a ce problème? Car lorsque j'en supprime un, ça me supprime tout. Merci (screenshot en pièce jointe)
Connecting remotely
I have downloaded the program to evaluate. I installed it on a machine, and i connect to it thru the localhost web browser. How can i connect to it from a remote machine? I have tried using the IP address:7080, i have tried using the FQDN:7080. neither will connect. Any help is appreciated.
MIB Browser
Hello everyone. I think I may have been posting in the wrong forum. I am having some trouble with the MIB Browser in OpManager 6.0 I am trying to manage a couple APC UPS units. I can find them no problem, do GET's no problem. But when I try to perform any SET's, I get the following error: Error Indication in Response: com.adventnet.snmp.beans.DataException: Error : MIB node unavailable for OID. This is with any OID I am trying to SET within the APC MIB from the OpManager MIB Browser. I have seen
Template for Webwasher
Hi Guys, Does anyone have template for Webwasher (Proxy)? -- Regards, Anandharaj System Engineer (Unix / Linux)
SonicWall PRO 3060
Hello, I am trying to add my SonicWall PRO 3060. I can not get OpManager setup to read any stats from the device. SonicWall does have its own MIBs, but I get errors when I try to load them. Has anyone successfully added a PRO 3060?
Network interface 2008R2 - no data available
Hi! I tried demo 8.5 and found issue. This issue is present in 8.7 too. With our HP Proliant with Windows 2003 Network interface is collected data. In HP Proliant with 2008 R2 - not. No Data Available. But Real time monitoring is working. Where can I tune network interface? Best regards, Mikhail
AuthenticationFailure : null
Hello, The serve monitored by OPManager is Windows 2000 SP4. snmp installed and well configured. No data is displayed on the OPM Dashboard and we receive the following alert each time : AuthenticationFailure : null Whats is the solution to that issue ? Thanks for your answer. AEC
SMS Center !
Dear support , I want to use sms for alert , so i have 1 device for sms , how can i use it for : Opmanager , EventLog Anayzer , Application manager .... Thanks so much !
How to obtain Service DeskPlus credentials
as licensed customer how/where to get my logon cred. to log support request on portal?
Question about OpManager Reporting
I'm testing out OpManager and a couple of other NMS systems. I'm having trouble with reporting and would like to know if there is a way to show a report showing bits in/out for an network device interface, graphed over a time period. For instance, for the previous 24 hours? Is there a way to do the same for things like Memory and CPU utilization? I've created a "real-time" chart on the Dashboard, but can't seem to find a way to query that information from the database. Thanks for any help, Jimmy
Opmanager: Provide Bread Crumb Navigation
Hello, As a feature request, can you provide bread crumb navigation? Thanks.
opmanage to suse linux
I am currently testing the opmanage product and want to know how to monitor a linux box in my dmz from the LAN. I have opened the correct ports but when i go to test credentials it says snmp and cli failed. Then when I go into edit monitor and then hit test monitor it says the monitor did not respond to the test request. Thanks for your help.
Monitor SQL 2008
Hello, does Opmgr 8720 support monitoring SQL 2008 Server? Thanks.
Next Page