NTP Server configuration in OpManger
Dear ManageEngine team, Please let me know if there is a way to configure NTP server in OpManager, I have a GPS/Satellite based NTP server on my network which I want to use as a time source for all network devices/application including OpManager. I can't find any settings to configure NTP server in OpManager v12.1. Regards, Mohsin
Unable to install OpUtils/ / Unable to download IPAM/SPM plugin
Hey guys, we have a server with OpManager 11.6 installed (Upgrade pack for 12 isn't available yet..) and I wanted to try the IPAM and SPM plugin, but the only download I can find when I click on the Download button is OpManager. The link inside OpManager always kicks me to: https://www.manageengine.com/network-monitoring/ipam-spm-plugin.html But there is no option to download the plugin. So I tried the OpUtils installer which claims that OpUtils has already been installed in a earlier version.. so
Probe and Central alarms not syncing
Hi OPM support, I have issue with number of alarms between probe and central server. The probe has 2099 vs central server 2226. How to sync this?
Sheduled reports
Hello, I'm having some issues with scheduled reports not working. I want to have a scheduled report setup so I can see down devices in the last 24 hours. I can see there is a report template already setup for this and I can see the data I want in it. I can manually email the report by clicking the PDF button and it successfully sends. What I want to do is have this automated so it emails a report to a distribution group daily. I understand how to set this up but its not working. I setup a test schedule
Exit Code 4: Error in getting output for the script (Suse linux)
Hello all, I'm trying to use custom script(Cache Memory) on monitored machine from Opmanger server Im runing this script with error as below After got that error message, I check log on Op server as image At the same time, I also checked excution directory on monitored machine and saw OpMnager file with empty content I m stucked at custom script a week, Any help would be greatly appreciated.
OpManager 12.1
Good Afternoon Customer that has been using OpManager for many years now so Im mostly familiar with the old UI for doing tasks. Currently I'm trying to build new Notification Profiles in version 12.1. When I create new notification profiles how can I without having to associate it with a server/device first? In 11.6 when I create a Notification Profile that's it. Build it and associate it later. In 12.1 when I build a profile it wants me to associate to a device, business group, or category
Trend Micro Service Monitoring
Hi Everyone, I am new to operation manager, I want to know whether i can monitor "Trend Micro Deep Security Manager" windows service via OpManager. I am getting error when i put the name of server in service monitoring that it wont accept space between words & service name is the same which i have mentioned. Regards, Nadim Shaikh +91-9619541242
Alarm stays acknowledged
Hi Is it normal that once an alarm is acknowledged it stays acknowledged even if it has been cleared in between? A week ago a windows service was down and generated an alarm. I acknowledged the alarm and restarted the windows service again and the alarm has been cleared shortly after. Now after about one week the windows service is down again but the new alarm is still acknowledged by me. I did not know that the windows service was down again and our support team assumed that I was working on it.
Alarms appear very slow
I set PING to several IP address, Alarms come very slow after the device is down, usually 20 minutes. Please help me to change this. Tks
opUtils 12?
Hi team, any info as to when an upgrade pack will arrive? TIA GWeiss
Custom Template will not poll
Hi, I have a new build of 12.1 that I am having issues with polling for a custom template. Initially I installed OM with the PostgreSQL database but then opted to uninstall and reinstall on the same server with MS SQL Express. I created a custom template for a device which queries without problem when testing the monitors. However, the device never actually gets polled. I search through the forum and found a few things to try but it still isn't working. I would appreciate some guidance on possible
Registering Opmanager
OPmanager requesting username and password. Dn't have one.
Monitor 2 server cpu
Hi, We want to know if there is a way to monitor two cpu from a server, for now is only monitoring one CPU. Regards.
Upgrade from Oputils v12.0 to v12.1
Dear Support Team, I would like to ask you about the possibility of the upgrade my OpUtils (IP Address Manager) from v 12.0 to v12.1. Is there any possibility to do this upgrade without uninstall/reinstall the newer version? Many thanks in advance. B/R Attila Odrobina
OPmanager Team It's nearly the end of the month
Reminder for Opmanager coders! It's nearly the end of the month time to support your version 11.* custumors. We do not expect much only a 99,9% working version 12.*
Cannot receive SNMP traps from HP Switch
Hi everyone, I would like to monitor an HP5900AF Switch, especially getting informed when any interface is up or down. The SNMP traffic from OpManager to the device works well, but the other direction I do not receive any traps from the switch. As written in the manual of HP (H3C) the specified MIB is the IF-MIB with the OID .1.3.6.1.3.1.1.5.3 for LinkDown and .1.3.6.1.3.1.1.5.4 for LinkUp, so not vendor specific. That should be the right one, but I still get nothing in the alert tab for the interface.
OPmanager 12 and IE11
Does anyone else have issues with OPManager12 and IE11? We have an alias for the server but are unable to logon via IE11. Chrome works fine. If I use the real name of the server it logs on via IE but doesn't appear to work\display properly.
RE: [##3289002##] OpManager not synchronising with ServiceDesk
Hi Aishu, Hope you are well. I have just carried out the OpManager upgrade as recommended below, copying the ‘com’ folder into C:\ManageEngine\OpManager\classes, then restarting the ‘ManageEnginer OpManager’ service. Having checked the OpManager version before and after they do not appear to have changed, it’s still version 11400 (64bit). Is this normal? Have I successfully updated OpManager, or did I miss something? Kind regards, Owen McLeod System Support Engineer
Cannot Start OP Manager - Windows
Dear All, I cant start OP Manager, error in wrapper : STATUS | wrapper | 2016/09/29 08:30:05 | Java Service Wrapper Professional Edition 32-bit 3.5.15 STATUS | wrapper | 2016/09/29 08:30:05 | Copyright (C) 1999-2012 Tanuki Software, Ltd. All Rights Reserved. STATUS | wrapper | 2016/09/29 08:30:05 | http://wrapper.tanukisoftware.com STATUS | wrapper | 2016/09/29 08:30:05 | Licensed to Zoho Corporation Pvt. Ltd. for ManageEngine OpManager STATUS | wrapper | 2016/09/29 08:30:05 | STATUS
ColdStart trap
Hi, I am very new in the subject and I would know that means this alarm. It generated in some devices: The ColdStart trap is received from "DEVICE NAME" .The trap details are as Follows, .1.3.6.1.4.1.3167.1.1.1: 1, .1.3.6.1.4.1.3167.1.4.1.1.1: DriversSnmpAgent, .1.3.6.1 .4.1.3167.1.4.1.1.2: 1, .1.3.6.1.4.1.3167.1.1.10: 160902232526 And it has affected? thanks for your help
What time will launch the service pack for version 12 ?
Dear Sir / Madam, On the official website said The service pack for version 12 will be tentatively available by the end of September, 2016. When will release it ? Regards, Joe
OpManager 11600 re-apply a template on a VM removes all VMware monitors
Hi, the title pretty much says it all: a vCenter with a few hundred hosts, SNMP-enabled and a few custom templates. Whenever I make an adjustment to the template and force a re-apply on the associated devices to reflect those changes, all the VMware monitors are lost, and we're unable to re-add them manually. The only way to have the new templates distributed while keeping also the VMware metrics is to remove and re-add the whole vCenter. It looks like the device loses the information that is a
OpManager v12.1 - Not Clearing Active Alarm After Issue Alert Cleared
As you can see in the following a host went down then came back up. I would assume since it cleared it would no longer show as an active alarm. Why is it not clearing itself in the active alarms? Device Active and Responding Unacknowledge Clear 21 Sep 2016 10:26:45 PM EDT Host NAME in LOCATION is not responding Unacknowledge Critical 21 Sep 2016 10:19:29 PM EDT
SQL Monitors - Which to Choose
I am adding my SQL systems into OpManager and I am curious on what are the best practice MSSQL Monitors to add/monitor?
Tools in OpManager
SNMP Ping Tool - Check if a device in your network responds to SNMPv1/v2 requests.
Downtime Scheduler - Error, unable to create
Hi, When I am setting up a Downtime Scheduler and then select a device, I get an error message (just says error) and nothing else (this is when creating a new schedule) and cannot do anything else (not even go back) Any ideas? Using build 11600 Thanks
Google Maps - Control refresh point
hi Team, Before Refresh: After Refresh: Please let me know how do we control this refresh point so that every time the map refreshes and shows the first screen. Regards, Javed.
Monitor windows mount point disk
Hi, I have several servers that use windows mount path, that it doesn;t have a drive letter. i followed the steps described in https://support.zoho.com/portal/manageengine/helpcenter/articles/monitoring-windows-volume-mount-points-using-opmanager it does discovered all the mount path but it report incorrect free space, used space, utilization. Even when i ran a report, see my screenshot attached,
CRC Errors on Cisco Interfaces
Hi I am getting a lot of false alarms about CRC errors on Cisco Interface I can clear the alarm but it comes back The real interface shows 0 errors , OPM show 221 How can I clean these errors and get real value from interface Thanks for reply
OpManager 11600, user can't authenticate via Active Directory
Hi, as per the title, I configured the Active Directory domain, and added a few AD users, but all I see is an "Error!" page instead of a successful logon. I tried following the logs while trying the procedure, all I see is ==> opmanager_serverOut12.txt <== 15:04:40:081 ServerOut: User Name for AD Auth in LoginAction ::: user.name 15:04:40:081 ServerOut: Domain Name for AD Auth in LoginAction ::: DOMAINNAME Doing a tcpdump from the host shows that there's no communication attempt from opmanager and
The AuthenticationFailure trap is received from [servername].The trap details are as follows ,
I've suddenly started to receive the following error alert 3 times every minute from one server: The AuthenticationFailure trap is received from [servername].The trap details are as follows , No more information available and I can't find any events on it in the Windows Logs on the server. Nothing changed in ManageEngine or the affected server. opManager is using the right community string and is passing the authentication. Is there any way to find the source of those traps? Thank you!
Error while stopping the "Manage Engine Op manager" service
hi Team, Im getting the following error while i stop the probe service. Error message: The JVM process terminated due to an uncaught exception: EXCEPTION_ACCESS_VIOLATION (0xc0000005) I have restarted the server and the issue is fixed as of now, however would like to understand what is the cause of this issue and how to prevent it from occurring again. Regards, Javed.
Compare Orion 12 and Opmanager 12.
Hi Team Support, Can you please send me the latest comparison of Orion and OPManager ? My company have than 500 Router Branch (800, 1800, 1900), 2 Data Center (vendor: Cisco, Juniper, PaloAlto, CheckPoint, F5, Citrix ...) What would be the advantages of OPManager against the three competitors, include the price as well. I would appreciate if you can also include the weaknesses and limitations of OPManager. I also compare solution about Config Management, Netflow of Orion and OPManager. My email:
Peoblem add FortiADC to OPManager
Hay Guys, I've problem to add device FortiADC to OPManager... FortiADC successfully add in OPManager. Data availability, response time and packet loss have been captured but memory, CPU and disk utilization is not detected. The problem is when in a menu interface, in NetFlow traffic statistics do not capture packets at FortiADC. Can You help me to fix this problem? Thanks.... :)
How to add a label to devices
My apologies for the noob question, but I have a list of devices (either in inventory icon view or the list view), and I can't figure out how to display these devices (in this case, workstations) with other label attributes (such as location, or having a relevant name rather than the computer name. Can someone please explain to me how to do this? Thanks, Adam
Config Backup
I recently downloaded and setup opManager 12 free edition on a windows server 2012 VM i have running. Really the biggest issues i'm having is that the config backup does not work and i can't find anywhere that shows you how to make it work. I downloaded the newest NCM plugin but apparently the 12 install i have already has an older version and i'm not sure if that's the issue or if i am missing something in my config. Any help would be great, i really like this so far, the config backup is just impossible
URGENT: Opmanager not working anymore!
HELP!! We experienced an outage of a site which caused the startserver.log of Netflow to grow & grow until we ran out of disk space this weekend. I was not able to delete this file with all services running. So I: - stopped all installed products' services (NetFlow Analyzer, ADAudit und OpManager) - disabled the services - rebooted the server - deleted the file (C:\ManageEngine\OpManager\NetFlow\serverstart.log) - set back all three services to automatic - rebooted the server again But now the standard
How to Change the Color of bar graphs from red to green
Hello Support, I have several machines that run very high no RAM like 85% which is normal. However on server view it shows a red bar graph how can I change that to green despite the value. Please let me know any sort of work around for this.
OpManager v12.1 Popup Window stays on screen
When clicking on a switch port, the popup window stay displayed, even when switching screens until the browser refresh key is pressed.
OpManager V12.1 Errors with Business View Builder
Multiple errors, The small window for uploading a file overlays other parts making it impossible to setup a link. Clicking on Save, results in an error that says the API is for internal use only.
Next Page