License Concept?
Dear all, Environment: - ESXi Server: 5 devices. - Virtual Machine: 40 devices - Network devices (Switch, Router): 3 devices How many license do we need for the monitoring? Ko Young Suk Thank you in advance.
Widgets not displaying data.
Hello, I'm using OpManager Professional v. 8811. Sometimes widgets: * Top 10 CPU Utilization * Top 10 Memory Utilization don't display anything. Other widgets work. What can I do ? best regards Janusz Such
Isilon Monotoring
Anyone out there had any success with monitoring Isilon storage systems? I have managed to connect to the Isilon but when I try to set up new Monitors using MIB Browser the MIBs are not readable. MIB Browser opens the RFC 1315 MIB by default, but when I try to use the ONEFS-MIB file the browser refuses to open it. I have tried to open the Isilon MIBs with MibBrowser.bat without success. I have also checked the MIBs with another browser (from System Pulse) and they parse ok. I have attached the two
op-manager is not showing cpu and WAN bandwidth utilization
I am using op-manager 8 and i am not getting any report of wan and cpu utilization report and some time snmp is not working properly. kindly help me someone. Khandesha Kothale Network and Security Administrator Mumbai.
OpManager MSSQL 2005 database seems too large
Hi - I upgraded my OpManager last night from 8721 to 8812 using the upgrade packs required per ManageEngine web site (files ending 8810 and 8_1_2). The upgrade took much longer than expected - the MSSQL backup took 58 minutes and the database reorganization done by package 8_1_2 took more than 45 minutes). I was monitoring both the application and SQL server using Task Manager during the upgrade and didn't see any resource constraints. My MSSQL database is 82G, which seems quite big and I suspect
OP Manager dont show CPU and Memory utilization
Hi all, I am using OP manager 8 professional. After some time (1 or 2 days) OP manager stop to show Memory, CPU, Response time and Disk utilization information then i simply run DBREPAIR few times or restart services of manage engine, after that it working fine but for just 1 or 2 days. Kindly find attached shots for your reference and help me in this regards. Regards, Arshad Ahmed
Up Time Availability Mismatch
Hi. When i check the router's up time in device availability report, it shows it is up since 18 hours 46 mins. But when i check it from the router's console, i saw it's up time as 2 days 6 hours 28 minutes.What causes this mismatch? Thanks.
Memory Utilization formula in OpManager 8
Is there a way to change the calculation of memory utilization in OpManager 8?
opmanager ncm plugin-in issues
Hi, I am using registered OpManager 8812 and NCM plugin 5580. Few issues encountered as follows. 1. When I change the view to display 50/100 items, it displays only the first 20+ items and there is no scoll bar for scrolling to view the remaining items. Using both IE and firefox. 2. Once a credentials profile is created, there is no option to edit the profile. The only way is to create another profile. There is also no option to delete credentials profie. 3. Once a device is assigned
URL monitors stop working
Hi. We have several URLs being monitored by OpManager but after a few days of adding them they randomly stop being managed (not all at the same time). If we choose to manage them they are fine for a few days (or sometimes weeks) but then break again. See the screenshot to see what happens. The sites are working fine, so it's not that (some are internal, some are external) Has anyone else had this issue? If so, is there a solution for it, or a log file I can consult to figure out what's going
OpManager Free Edition can support VMware Host ???
Hi Support, We tried to use OpManager (Free Edition) to monitor basic functional (CPU, Memory, Disk) on VMware Host. (see picture below, it is Bkk-vm01 – vm03) But it did not have any information about CPU and Memory. I’m not sure free edition that support vmware host. Regards, Thanachart.
Opmanager time is not match system time.
Please help me to do it on Ubuntu Server. Sorry, I am beginner.
SNMP v3 Opmanager and Nortel/Avaya
Hello, I have over 200 Nortel/Avaya switches, mix of 5500 and 8600. I am moving all these to SNMP v3 as part of our PCI compliance. I have created new credentials in Opmanager to reflect v3. When i update a device with the new credentials, it fails , when i try to "rediscover now" again it fails. the only way i seem to be able to get Opmanager to use V3 credentials correctly is if i remove the device using RemoveDBEntries.bat, restart Opmanager Server and re-discover the device.Then it works fine
OpManager 8812 map and list views display different device numbers
Hi - I upgraded my OpManager last night from 8721 to 8812 using the upgrade packs required per ManageEngine web site (files ending 8810 and 8_1_2). After the upgrade, I noticed that when viewing my maps, the items shown are different depending on whether I am viewing the Map view or the List View. For example, Servers map view shows 42 servers, list view shows 44 servers Routers map view shows 91 routers, list view shows 109 routers Etc. Any idea how I can fix that? Thanks
Netflow plugin becomes unavailable
We are starting to have an issue where the Netflow plugin stops and no flows are being processed. We have to restart the OpManager service to get it going again. We are on the latest version of both OpManager and the Netflow plugin. We also have the NCM plugin. All are running on the same server running Windows 2008 R2 with 8GB RAM. We are looking at 70 flows from Netflow. Is there a way to monitor with OpManager port 8888 and if the Netflow plugin stops we would be alerted? It was down for
Weird Graphs
Hello, Wondering if anyone else is having the same problems I am with my graphs. I am seeing weird ups and downs in my graphs. The poll rate is 1 min but still shows the above. I am testing out opmanager and cant seem to figure out what it is. The table data shows the points just fine. Any ideas? Thanks in advance. Jeff
Opmanager login error after upgrade
Yesterday I upgraded Opmanager from 7200 & above to 8050. While the installations didn't end with an error, I started receiving "Oops looks like a few tables got corrupted. Don't worry.. Run RepairDB.bat from bin directory and restart the server" errors when I trying to login. I tried repairdb many times, with no error messages, but that didn't solve the issue. I found log files in \logs directory that includes many errors as below. What should I do to repair this issue. I only have the conf folder
Scheduled SPM fails frequently
Hi, in our environment the switch port mapper usually fails after one or two cycles. SPM is showing "Scanning...", but nothing happens. Also scheduled scans in another Switch group doesn't happen after that. We had the issue with 50018 as well, but it still isn't fixed in v6. Anybody experiencing the same? Regards GWHome
Uptime Widget
Is there an easy way for me to get a widget to display the uptime on all my devices or devices I choose? I have the SNMP monitor already running on each server. I created a Top N for a Performance Monitor widget. But it only shows lowest ever value, highest ever value and average. I would like the current value to be displayed.
When will OpManager Distributed Version 9 be released?
Hi We are currently using version 8 and holding off configuring and exploiting it in the hope version 9 becomes available soon as promised. Is there an actual date? If we did populate all the fields in version 8 can we port this across to version 9 without haveing to type it all back in ? Thanks Andy
Mail server settings
Hi I have recently changed the mail server settings to use a different mail server. But when I set the "From Email ID" field, it is being ignored and the mail is being sent from the address that opmanager uses to authenticate with the mail server. Thanks Dave
How to duplicate OpManager to another site
Hi, I have OpManager that running fine in primary site. Since there were quite number of changes / configurations were done, is there a way we can duplicate the OpManager from primary site to other site? The most significant configuration what we done is SNMP traps, MIB files, Notification Setup, and Device template. So, doing this all over again is not a best practice and its time consuming as well. Note: All site using their own license key. -- Regards, Anandharaj System Engineer (Unix / Linux)
Derive new business view from existing?
Is it possible to derive a new business view from one that you have already created? I spent a good chunk of my time a few days ago creating a view of part of my infrastructure, but now I want to diagram out specific portions and it would save me tons of time if I could just derive a new view, delete all the irrelevant items for that portion of my infrastructure, and then save that view as a new one.
Bulk rediscover?
Is there any way, other than deleting and then rediscovering, to rediscover several devices from list view (servers, switches etc...) ?
OID in OPManager
Hi Gabriel, I can view all trunk state in MIB browser just need an OID for example: .1.3.6.1.4.1.6889.2.8.1.14.1.1.4 but in OPManager need add OID one by one for example: .1.3.6.1.4.1.6889.2.8.1.14.1.1.4.1.1 .1.3.6.1.4.1.6889.2.8.1.14.1.1.4.1.2 ..... How to show all state in OPManager?
Problem creating downtime schedule
Hi. I am using OpManager 8 (build 8052) and have an issue with the Downtime Scheduler for monitoring URLs. Some of our web sites are offline from 8pm until 7am the next day so I want to schedule downtime for this time window. However, when I set the start time to 20:00 and the end time to 07:45 it generates this error: End time should be greater than start time How can I get around this? I tried creating 2 schedules, the first from 20:00 to 00:00 and then a second from 00:00 to 07:00 but
Configure Network Interfaces for monitoring by OpManager
I am running OpManager 8 on Windows and have several Ubuntu 10.04 LTS servers. I have been able to get pretty much everything I want configured but cannot find a way to make OpManager identify the ethernet interface(s) in the servers. I haven't been able to find any information on net-SNMP or in the forums here.
Can only see one MSSQL instance
My SQL server have two instances but OpManager can only see one. Tried to rediscover. Tried to "Add Monitor" under "MSSQL Services" but the second instance is not listed.
Bug Notification profile alert time window
Hello, I have a problem with Opmanager 8 build 8050. When I try to make a new Notification Profile Rule for sending mails alerts, in a device (Add Profile > Select a Notification Profile > Define Criteria > Apply this profile during the below mentioned time window), I define From 18:00 To 08:00, all days, but this rule does't work after 23:59. Alerts are not send by mail ! I think that the problem is because the window exceeds 23:59. If this is true, how can I do otherwise? I need to create another
Manage vs Status Poll
Hello, I'd like to know why OpManager 8 is raising discard alarm on a switchport when that switchport is not set to Status Poll. It is configured only as Manage to gather data but when it receives a discard paquet, OpManager raises an alarm. thank you
Monitor HP Blade servers with OpMgr
Hello, I am writing to ask for an explanation of how to monitor HP Blade servers with OpManager, I read a guide to insert a folder in the MIB MIB, but I was not able to have a positive ... the model is BladeSystem c7000 Enclosure G2 How can I fix this? This is URL for the manual http://forums.manageengine.com/topic/hp-blade-center-monitoring
Monitor Drive Array Status for HP ProLiant Server
Hi Gabriel, The same model server and the same smart array raid controller.some of servers to pass the test and another can't get return value.
MIB browsing within OpManager - sort alphabetically?
I have MIBs uploaded for custom devices, Cisco, HP, etc..and I now find that browsing to a specific MIB to create a new SNMP monitor can be quite a headache. It would be great if the drop down menu for selecting MIBs as well as the MIB browser could sort alphabetically.
Availability Graph not showing
All of a sudden we have a Cisco 2800 which the availability is not showing up properly. We've attempted to repair the database but no issues were found. All other parts of the router graphing are working properly. Here are some screen shots of what it looks like.
How to change the RDP portnumber of Tools in the device's snapshot page.
Dear all, How to change the RDP port number of Tools in the device's snapshot page? We know that defaut number is 3389. we want to change with other port number. Thank you in advance.
opmanager AD widget dashboard
Hello, I had 2 windows dc's in opmanager (build 8812), there are windows 2003 VMs. All AD counters seems to be correctly polled (AD Store, Network, LSASS, LSASS process monitor, NTFRS, NTFRS process monitor, perf, etc ....) When I want to add "AD Services by availibility" widget on a dashboard, no data/no services are displayed ("Configure the parameters to display required data."). When I configure the widget, the field "Device Name" contains "...Select a Device..." and nothing else (I cannot see
Problem MIB of switch cisco 2960 & 3com 7700
Hi Guys, Good Afternoon, Anyone can help me? I have a cisco switch type 2960 and 3com 7700 and I want to monitor the temperature of the switch. However there is a problem, we can not monitor the temperature of the switch. Can you tell me about the cause of the problem and the solution to the problelm? Currently SNMP from the switch is already active and i have ask to principle about it, and the answer from principle said the causes is about MIB. I have search and download about MIB of cisco switch
Add new map image for business views
Hi I have been through this forum and understand that any new maps need to be .png or .jpg and all names need to be in lowercase. I also understand they need to be in ManageEngine\OpManager\images\maps. I have done this yet when I go into properties of existing business views, I still cannot see the map image. Any ideas what I am doing wrong?
Mibs for Nortel swtiches
Hi, I want to be able to monitor some information on our Nortel switches but I do not find any mibs for these switches. Where can I find mibs for: Nortel Business Policy Switch 2000 Nortel BayStack Switch 470-48T Nortel Ethernet Switch 470-24t Regards
Monitoring Dell Equalogic Storage temperature
Hello, How can I monitor my storage(Dell Equalogic) temperature ? The device was added and SNMP is working(test passed), so when I go add the monitor just show me Dell Power Edge Temperature and this monitor do not working. How can I do to add the correct monitor ?
Next Page