License upgrade -not working
Hi, I had a permanet license for Exchange and Active Directory, and a temporal license for SQL. I have just received a permanent license for the three solutions: Exchange, Active Directory and SQL; howewer I have noticed that after I applied the new license in order to be able to see all the monitors, I have to rediscover and configurate all de servers again. I think this is not right. Is there another way to apply the license javascript:emoticon(':?:') Question, and save all the configuration I
NetFlow Analyzer 5.5 Available
We are happy to announce the availability of NetFlow Analyzer 5.5 (Build 5505). Go to NetFlow Analyzer Home NetFlow Analyzer 5.5 (Build No: 5505) Released Changes: 1.Localization support for Chinese, Croatian, Dutch, French, German, Japanese, Spanish languages. 2.Exporting V9 flows will report large number of interfaces than the actual number. This issue has been fixed. 3.Time related Data Archiving issue has been fixed. 4.US Daylight saving time issue has been fixed in Full builds. Existing customers
how to construct OD flow
how to construct OD flow from netflow data
no router export problem
I have installed the advent manage engine netflow analyzer on the windows xp (sp2)and configure the router correctly(ethereal can capture the udp package on my computer ). But the NFA still says that no router export.Does the problem come from the xp with sp2 beacause I read the user guide that the the surpport platform is just the windows xp with sp1?
Raw and Aggregator data
Dear Raghu, Thanks for your reply for my existing mail. I would appreciate if you could help me in this issue, i have attached the document for your reference. I have set the RAW data storage to 1 day, and as per my knowledge Aggregate data would be store forever. But i have a very big issue that is the report shows the top protocols as 400MB transferred but if we drill down then it gives data only for 40MB or less that what is shows? Is there any resolution to this. Thanks Hassan
Can i enable flow on trunked interfaces
I cant seem to do this. Using Cisco 3550's I need to monitor the flow from the customers LAN. I thought the easiest place would be the uplink to thier lan/s. Or should i just enable the flow on the user VLANs
Can't e-mail sales, asia-sales or suport
I'm having problems sending an e-mail to sales, asia-sales and support. Can someone from Advent please investigate why this is occuring? The response is coming from portmaster@adventnet.com Thanks, Greg. -----Original Message----- From: System Administrator Sent: Friday, 4 May 2007 11:55 AM To: asia-sales@adventnet.com Subject: Undeliverable: **Message you sent blocked by our bulk email filter** Your message did not reach some or all of the intended recipients. Subject: Enquiry from a prospective
GRE problem
Hi ! The information on the some GRE interfaces is not displayed. Interfaces are configured equally. Version : 5.5.0 Build Number: 5505
Totel volume per host in IP group source/destination reports
I want to run a report against an IP group that will give me the total volume of traffic (Inbound and outbound) for the top N hosts in that IP group for the time period that the report is run for (In this case the last month). When I run a source report for this IP group for the last month, the totals for each host are much lower than would be expected. What data is being used to display this? It appears that most of the volume is being lumped into the others category. From reading some of the other
List if devices export NetFlow :
Hello, Can someone help me out the list of devices which exports netflow ? I found the list of devices which exports sFlow from this forum. I want to know the same for the netFlow. Thanks in advance, -Raj
newbie question
I have multiple T-1s being aggregated on some of my routers. Does that mean I need to configure the Multilink interface too? Sorry if that's a dumb question.
error trying to configure second interface
I've set up one router for netflow and it works great. I'm trying to set up a second router and I'm getting the error message "Cannot configure Identical Destination Address and port" - which points back to my system running Netflow Analyzer. This is a Cisco 2651XM running IOS 12.3. Does anyone know why I can't configure the second interface?
Lack of features
Hi, I have been evaluating ManageEngine Netflow analyzer and Somin Scrutinizer NEtflow analyzer and found there is major gap in features. I think manage engine cusomers need more features than what is present now like 1. Real time statistics for Top Talkers / Top protocols / Top conversation 2. Long lived data 3. Network Map which changes their sign depends on the traffic flow 4. Alert should be generated and sent with the Top Talkers in the mail body 5. i dont think Sflow may be appreciated by many
segmentation fault
I'm trying to install Netflow Analyzer on Ubuntu 6.10. When I try to run the .bin file to begin the installation I immediately get a "segmentation fault" error. Any ideas on this? Also, if you have any general tips or a guide for installing on Ubuntu or Debian I would surely appreciate it! Thanks. tcbonline
Bandwidth of my dsl line
i have a line of 2mbps but my downloading happens only at max 95 kbps ...as per netflow .WHY????Is my configuration wrong or the line wrong?
Limitations of NetFlow on a 6500 in HYBRID mode w/Sup 720
Ok, I'm trying to setup NFA to work on a Catalyst 6500/Sup720 running in Hybrid mode. I've skimmed these forums, and it seems to be a default to provide links to configure NetFlow for Native mode, which doesn't help me any. I've given up on configurating NetFlow on the MSFC, because all I see is inbound packets. This is inline with how MLS on the MSFC in hybrid mode works, so I don't expect to see output traffic, so I relegated to trying to get Netflow and NDE working properly on the Supervisor.
Question about alerts
I have a question about the alert percentage threshold. What does the percentage represent? Is it just a percentage of the bandwidth for the selected interfaces or is it an agregate percentage of all of the interfaces that are configured on the system. Here is a sample alert e-mail: Alert From NetFlow Analyzer *************************************************************************************** Alert From NetFlow Analyzer : TotalUtilization wm-inet-a.randomhouse.com(L3 -XXXX-XXXX-XXXX) is 7% AlertProfile
Netflow analyzer 5 freezed
I'm using Netflow analyzer 5 and now it's freezing (no traffic displayed), how can i overcome this? thz
Differences in a week and day report!
Big differences in daily report and weekly report. In daily report traffic grater than in a weekly report. Sample in the attachment. Using NetFlow Analyzer 5.5 trial. Can any one explain this?
Netflow Version 9
I beleive that Netflow V9's advantage are templates and how they can reduce the size of the exported data and thereby the netflow traffic. what i am not sure is how to configure my router to specify what fields i want to include in my template so that only those can be exported to the analyser. could someone please help me with the commands. Thanks in Advance
Oversized database
Hi, My net flow database increased over 140 GB and it utilized all disk space, how can I purge all data, while keeping my configuration and data structures. (if possible I like to keep one months data while purging database) :oops:
Apache Error...
Hi, when i try to login with the Admin username & password, it is showing Apache Tomcat 5.0.28 error on the HTTP. i am unable to login and check the reports. can some one help me please. Regards, Kiran
Total traffic in KB
plz help i am using NFA and with in the last one hour downloaded a file of size 600 MB bu tmy total traffic is showing only in 500KB.WHY????
AdventNet Update Manager stuck at 98%
I used the "Shutdown NetFlow Analyzer" link in the start menu to shutdown the application. This took about 3-5 minutes for the processes to unload (like "mysql" if memory servers well). I was on 5503, I ran the \AdventNet\ME\NetFlow\bin\Update Manager to apply the 5505 service pack (which I just downloaded yesterday). It has been stuck at 98% for about the last 24 hours. How do I proceed from here and prevent data/application corruption?
Problem accesing NFA, it seems it's down and it's running!
Hi all, I'm running NFA 5.5 on a CentOS server, and sometimes when you access to http://server_NFA:port where is running NFA you get the classic IE error "The page can not be found".. so, you log on (SSH) the NFA server and the daemon it's up and running... then, I restart /etc/init.d/netflowanalyzer stop/start and you can log in the web page. one detail, you never lost data in the graphs even if you can not log in NFA via web for several days.... it's like some problem with the apache server or
Reading Netflow data
Have been running NFA for a couple weeks and have some good data to review. It is collecting data from one cisco router that is using PAT - one IP represents all internal users (172.16.1.1 for the example). When I look at the IN Serial interface, it shows majority of the traffic is http. SO, I want to know who is receiving all this http traffic. I look at the OUT Ethernet interface which closely maps the protocol distribution. When I click on the Application tab and choose HTTP which is the highest,
About NFA collecting from 29XX,36XX Y 37XX series
Hi, I was reading from http://manageengine.adventnet.com/products/netflow/supported-devices.html that 29XX,36XX Y 37XX cisco's series are not supported by NFA... my question are? Is this because 29XX,36XX Y 37XX cisco's series does not support Netflow or NFA does not understand netflow flows from this series? NFA will never support this 29XX,36XX Y 37XX series? thanks in advance regards; Israel
Apache Tomcat/5.0.28 logs
Hi, a simple question: Where can I find Apache Tomcat/5.0.28 logs in the root directory of NFA? regards; Israel
Netflow Analyzer 6.0
What is the latest on the release date for NFA 6.0?
router restarts
when i use the command ip flow-export destination <address> 9996 cisco router 2610 ios Version 12.0(2)XC2 system restarts i think the problem is leakage of memory can any one tell me
license upgrade
Hi ! I have a license for 10 interfaces, at updating on 20 interfaces it is necessary to pay the full sum?
NFA with 6509E
We're evaluating NFA with 6509E running in hybrid mode, including both inter- and intra- Vlan traffic. There are several questions regarding the NFA deployment. 1. After applying "set mls bridged-flow-statistics enable vlan x", this system message is shown "QoS bridged microflow policing enabled on vlan(s) x due to the bridged-flow-statistics feature". What does it mean? 2. At the moment, we only enable NDE on PFC. Is there a need to enable it on MSFC as well? If so, what sort of additional infomration
mysqld-nt.exe problems
Hello, I'm evaluating NFA for my company and I'd have to say that I like this app and GUI better than any other out there. I have ran into a major issue though. I'm simply managing two different interfaces on two different 7206 Cisco routers. My ports are correctly registered as they are imported into NFA via SNMP. When I start NFA everything seems to be fine and works great, but usually after about 5 to 10 minutes I can no longer view source, destination, or top conversations. Hosts and applications
Traffic reports showing wrong numbers
Hi, on the traffic analysis report graph in the below i am seeing the traffic Graph Max and Min. Utilization over 100% (Max. 1470.93% and Min. 826.22%). can some tell me what config i need to change Regards, Kiran
sFlow early access build available
Hi All, NetFlow Analyzer Professional Edition's next release will have the support for sFlow. We now have the early access build available for sFlow . Please send us your contact information to support@netflowanalyzer.com in case you are interested in this early access build. Please note that No Migration support is available for this build. The following devices are capable of exporting sFlow : AlaxalA Networks AX7800S AX7700R AX5400S Alcatel OmniSwitch 6850 OmniSwitch 9000 Allied Telesis SwitchBlade
NBAR and Serial interfaces
Good Morning, I have just enabled NBAR on all of my interfaces. The problem is that the NBAR report is only available on the Gigabit Ethernet interface. Netflow shows that NBAR is enabled on all of the interfaces on the router ( I have one Gigabit Ethernet interface, 1 Serial interface with 4 subinterfaces). The router shows that all of the interfaces have NBAR enabled. I have restarted the Netflow service with no change. Any ideas? Thanks.
Scheduled Report on NFA
Hi, I would like to know that, can i get a customised Top Application Report usage on the routers, i have 4 routers configured, i had configured the scheduled reports but the reports are showing only in numbers not in the graph, report is only for Traffic graph, can i get a Pie chart or Top Application report configured to send the scheduled mails. Kiran
unable to see new router on dashboard NFA 5.5
Hi, i had configured a router to farward the ip cache to NFA 5.5, but i am not able to see the router on the dashboard. i am able to ping the router the ports (9996) is opened on the firewall but still i am not able to see the router on NFA dashboard, on the router serial port i had configured the ip netflow is it fine ? or only on the fastethernet i hav to configure ?
How to change language
I installed Netflow Analyzer with the english language but as soon as I open the website it show everything in dutch!! Is it possible to change it into English?!
NFA not using the timestamp fields
I'm developing an implementation of Netflow in a switch. Anyway I'm using Netflow Analyzer to "validate" my work and check if my netflow export packets are correctly formed. Everything works just fine, but I have the impression that Netflow Analyzer ignores the timestamp fields of my packets. Let's take an example: Imagine a continuous flow starting at 00:00. After 30 minutes, the flow is exported because of the "active timeout". The start timestamp of the netflow export is 00:00 and its finishing
Next Page