Cannot connect to SQL Server from FREE SQL Health Monitor
Hi, I have installed Free SQL Health monitor but I'm not able to connect to any of the servers. I have full access but I'm getting errors within the Health monitor tool while connecting to the sql servers. I tried without instance name and provided machine/server, Database, user id and password but getting error "RPC Server is unavailable". If I try using the IP address then I get access denied. Thanks.
rpc server not available
my pc keeps telling me my rpc server is not available
Error Code: -2147024891
Good day, Need some advise, I tried to add a server but an error code appeared Error Code: -2147024891 Thanks & God Bless, Ryan
Window Health Monitor reporting
The tool seems ok for giving CPU, memory and disk usage. The problem is the reporting, from what I can see it only allow for one machine at a time to give a PDF report. What if we wanted to generate a report for up to 20 servers and or workstations and also automate that? Can any let me know if it can do that? If not is there anything that Manage Engine has to do reporting like that?
Sort Items in Groups
It would be really helpful to be able to sort items in created groups. I just created a group and am having a hard time telling if I have left any out. High to low, low to high, A to Z, Z to A, etc. Thanks!
How to get the Free MIB Browser
Everything I try to do to download the MIB Browser fails It first required me to logon with an account ......I did that Now every time I try to download it redirects me to the tool blog so I try to download it from there and I the same thing happens
Where can I download the Free SNMP MIB Browser for LINUX ??
I have and old versión for the Free SNMP MIB Browser for LINUX, and I need the new one, but I only found the Windows download link. Where is the Linux version? I would like the "ManageEngine_MibBrowser_FreeTool.bin" file or similar.
Windows Health Monitor
Where is the information stored? What database? Or a file? It does not generate reports of the last 7 days? 15 days?
Free Windows Health Monitor Refresh Interval
Is it possible to update Free Windows Health Monitor so it can refresh more often than 5 minutes? I'd like to see updates every few seconds to review impact to servers during transactions. Thanks.
Problems setting up email on Windows Health Monitor
Dear, I downloaded Windows Health Monitor software , but I can not set up email. I tested the settings with a corporate email and also an email from Google. The error that appears in the email from Google is failed to send an email . settings : SMTP Server Name : smtp.gmail.com Port : 465 User : scannerjfe@gmail.com From : scannerjfe@gmail.com Can you help me?
Query variables by name with MIB Browser Tool
I am exploring the way to monitor my device with SNMP. What I struggle with, is finding the way to query with MibBrowser Tool the variables with the name rather than full OID. I do receive some data, and this indicates to me that connection is established, but I can't interpret the data I receive. Let me be more specific about some details. On my agent we use the MIBs that were downloaded from net-snmp project: https://sourceforge.net/projects/net-snmp/files/net-snmp/5.7.3/ In particular SNMPv2-MIB.txt
Can't load APC Powernet417 MIB in ManageEngine, keep getting the following message:
I keep getting the message: Loading MIBs Failed: Aborting ... null <OK> Anyone else have this problem? I Appreciate any assistance. Thanks in advance.
can i add attachment to password expiry notification email?
can i add a file attachment to password expiry notification email - free tool?
CSV Generator Tools Issues
I can not seem to make CSV Generator to work. From the directions in the help index, I select the AD object type from the list, then browse and select the CSV file from the File Name field. After I click on Generate I receive the error: "Invalid Format: Provide sAMAccountName as header" I exit out of CSV Generator, add "sAMAccountName" in the first row of the CSV, and retry. I receive the same error. When I try the other options, such as "Advanced", and pick from the other attributes it does not
Windows Health Monitor: emails automatically triggered?
Hi, Is there a way to change the settings of Windows Health Monitor so that it automatically sends email alerts when something goes wrong? Thank you!
SNMP MIB BROWSER
Hi. I am trying to configure the Trap Viewer (SNMP MIB BROWSER), to filter the traps sent by an application. It work fine when the filter parameter is exactly the same as the event received (example: event code 3000) is easy to configure in the trap.parser. But, my situation is more complex. I need to filter a trap, when the filter parameter "contain" a determinated value (example: the trap received has a eventdescription like this: Operator LUIS - Login at 10:00 hs - from xxxx terminal ....), and
MibBrowser help
Is it possible for the browser to retain entered hosts and config (port/community, etc.) across sessions? When I restart MibBrowser I have to enter all this info again.
Free Windows Health Monitor > Error Code : -2147217392
Failed to connect: servername Error Code : -2147217392. Error Description : IDispatch error #3600 Received when attempting to monitor a Windows 2003 server on Active Directory. Any help would be appreciated. Thanks, - jody
MibBrowser Tool Error
I am unable to load any MIBs into the tool on the initial application launch after a fresh install. I have attempted to run as admin as well and get the same errors. I get the following two errors:
Advice Needed for MIB Tool
Hi Guys, I am hoping that you guys might be able to help me. We are developing a small application to centrally store and visualise MIB files in order to highlight the MIB structure and help us identify anomalies. Someone suggested that we could make this (freely) available to other people, and therefore I need some feedback about the frustrations people have regarding toolsets that support MIB walking and storage/visualisation etc. Not trying sell anything, I just want to understand what problems
setup trapviewer
Hi, Some question : how to configure trap viewer by default, i want each time i launch trap viewer that enable mail is ok, the trap parser is loaded and the community set. I need, trap viewer launch automatically if i launch mibbrowser. Because i need the system start automatically when the computer has booted. Thanks.
Configure Mail in Mibbrowser
Hello, I have problème to configure the mail in the Trapviewer windows. How does it work ? Thanks
SQL Health Monitor - Numbers are too high
The numbers being reported in the monitor seem way too high, almost like they need to be divided by the total number uptime seconds.
Launch of Free Disk Monitor Lite
We are excited to announce the global availability of Free Disk Monitor Lite . Available immediately, the free disk monitoring tool helps monitor the disk space on an unlimited number of Windows servers, VMware and Hyper-V hosts. Here are some highlights of the tool: Monitor the disk utilization of Windows servers, VMware servers and Hyper-V servers Set threshold values for the used space View pie charts of the disk space capacity Auto detect the VM's running in a server Get to know the VMDK file
Creating a remote snmp v3 user
Using the ManageEngine MIb browser, what are the steps to create a new remote snmp v3 user in the table: .iso.org.dod.internet.snmpV2.snmpModules.snmpUsmMIB.usmMIBObjects.usmUser.usmUserTable Thanks Phil
Min browser 'Get' preceded by 'Get' sysObjectID
Mib browser in SNMPv2 mode works OK. In SNMPv3 mode every 'Get' is preceded by 'Get' sysObjectID. Output below shows a 'Get nstAgentModuleObject' but is always preceded.by 'Get sysObjectID'. Why is this happening? output ============================== Sent GET request to 10.186.50.51 : 161 sysObjectID.0 .iso.org.dod.internet.private.enterprises.netSnmp.netSnmp Enumerations.netSnmpAgentOIDs.10 nstAgentModuleObject.0 2
Mib browser precedes every 'get' with 'get sysObjectID'
In SNMPv2c mode a 'get' works fine. In SNMPv3 mode a 'get' causes 2 'get' requests. The first 'get' is always for the sysObjectID. e.g. below the 'get' is for 'nstAgentModuleObject.0' which works but preceded by 'get' sysObjectID.0 Why is this happening? Output ====== Sent GET request to 10.186.50.51 : 161 sysObjectID.0 .iso.org.dod.internet.private.enterprises.netSnmp.netSnmp Enumerations.netSnmpAgentOIDs.10 nstAgentModuleObject.0 2
V§ Trap not being received
HI, I am having problems with SNMP V3 Traps.Although I can see that the V3 authentication is correct by testing with GET commands (user, Auth, Priv passwords, I do not receive a trap entry in the SNMP Browser window. Using a sniffer, I can see that the trap is being correctly sent, and I can also receive V2C Traps so the Firewall is not an issue. I am currently using V5.0 of the SNMP MIB Browser. Perhaps this is just a setup problem. Thanks for providing this great tool, and please help with this.
Free Webinar: SNMP Demystified - Register now
The biggest myth about SNMP is that it's complex and difficult for a beginner. Join us for a free webinar to learn how SNMP can be your friendly neighborhood protocol. Presenter: Karthik Ananda Rao, Evangelist, ManageEngine Register here : https://connect.manageengine.com/home/pages/Page/manageengine-webinars/snmp-demystified-3a4603809939bf01debf17855dc5f624
Free SQL Health - Doesn't see server
During discovery, many servers with SQL Express (application specific) show up, but our production MS SQL server doesn't. For security reasons, out server uses a non-standard port. Is there a way to tell Free SQL Health Monitor what port I'm using?
adventnet 1.2.2 - Too many SnmpVarBind objects
Hello, I am investigating a memory leak issue in the enterprise application. I did some profiling and see that number of SnmpVarBind instances is above 56,000 , these objects are being created by Asn1Parser and SnmpPDU objects, we have 44 instances of each of of them. Overall I have 3 sessions ( 3 SnmpSession objects ) which is quite reasonable, but number SnmpVarBind objects grows permanently until I get OutOfMemory exception. I wonder what could be a reason for that? Is there any resources allocation
I would to know more about server monitoring?
I would like to know more about server monitoring. If anyone know about this please help me to know about the topic.
Configuring devices on Mibbrowser
Hi All, I am cheking the Mibbrowser and its a very intresting tool. I am hoping to use to monitor some power devices on a network. I have the MIBs from the three equipment types and i am able to load them on the MIBbrowser. The problem is I dont see where to add the Ip addresses of the power devices (there could be about 20 of these). I am hoping when i configure this i should start to receive traps from the power devices and at my computer i will be seeing what is happening at what location (i.e
Exhcnage Health Monitor isn't sending alerts
It connects to my Exchange 2007 HUB server no problem and reports the correct number of items in the queues. However, when either the warning or the critical threshold is reached, it doesn't send out an alert. I know I've got the mail settings correct as I use them for other functions on the network. Anyone seen this before and can point me in the right direction? Thanks!
Free HyperV Performance Monitor Tool and Free Hyper V Configuration Tool crashes on Windows 8 when trying to connect
Hi, I have Hyper-v core installed on a server and I'm managing it remotely with Win8. I have installed Free HyperV Performance Monitor Tool and Free Hyper V Configuration Tool on the remote Win8 macine and I can run it the first time. But as soon as I fill in the values IP/Host username and password, it crashes when it starts to make the connection. I've tried both with hostname and ip-address. I always get a window with "... has stopped working." Extra info: The windows 8 machine is actually a vm
Free Ping Tool - No Ping w/ LAN IP Firewall
Hi, I tried Free Ping Tool, the latest version, in my company LAN. It works well with www.google.com and any server LAN IP addresses but doesn't work with firewall LAN IP adresses. Indeed, the status is RED and I have no reply (RTT = 0, Success = 0, Failed = 0) whereas when you ping these firewall in a MSDOS windows, it works. Any idea about the cause of this issue?
Windows Monitoring Fail to Open
Hello! I tried to use windows monitoring. However, it can't open in my computer. How can I open that in windows 8?
How to send "hello world" message to DMS using dmsMessageTable
Hi, I am using MIB Browser to connect it to the External DMS Device. Can anyhow help me in providing steps to send a simple "hello world" message using dmsMessageTable set and get APIs
problems with SNMP MIB Browser
Hi, I am facing two problems while using Manage Engine MIB Browser Free tool. A help on this would be appreciated. Back Ground: -------------------- Trying to connect to a DMS device and doing a SNMP walk on the variables. DMS Device is enabled on "Central" mode which enables SNMP Agent to connect.These walks are done with version setting to v1 Problems. -------------- 1. dmsMessageTable information incomplete: -> The device has been set with 5 different message but when I do a walk on the
SNMP PROBLEMS
Hi, I am facing two problems while using Manage Engine MIB Browser Free tool. A help on this would be appreciated. Back Ground: -------------------- Trying to connect to a DMS device and doing a SNMP walk on the variables. DMS Device is enabled on "Central" mode which enables SNMP Agent to connect.These walks are done with version setting to v1 Problems. -------------- 1. dmsMessageTable information incomplete: -> The device has been set with 5 different message but when I do a walk on the
Next Page