Service alarm not showing
Hi I'm running OpManager 9 with the latest updatet, but have some problems. My problem is that I have som services on my Windows serveres that Opmanager is set to monitor. The problem is that if the service stops, Opmanager does not give any alarms on it. Yes I can see that the service is down if I drill down on a single server, but OpManager it self does not trigger an alarm. Anybody with any surgestiens on how to fix this?
How to add Host header in URL Monitor (Opmanager 9)
Hi All, How can I add host header in URL Monitor? I have a server with different sites on it. I'd like to monitor indiviual site with host header. What is the best way to do that? Best, Chee Gone
Url monitor several servers
Is it possible to monitor several servers with the same URL monitor. We have several servers that runs the same websites. Therefor we need a way to monitor them with say www.abc.com which does not resolve to the actual webserver we will monitor. Instead it shall use the ip of the server and send the url specified as host header. Best regards Claus P
Problems with URL Monitor and shared IPs on IIS
Hello, if i configure a URL monitor for sites that run on IIS and share the same ip with other URLs than i get a "Host Unavailable" error. Examples (all on one IIS): Site1: www.example1.de on IP 123.456.789.010, no host header - check as ok Site2: www.example2.de on IP 123.456.789.011, host header "www.example2.de" - Host Unavailable Site2: www.example3.de on IP 123.456.789.011, host header "www.example3.de" - Host Unavailable I check Site2 and Site3 in browser - all run fine. (sorry for my english)
Is there a link from OPM to NFA(not plugin)
Hi Support team, I want to know if there is a link from OPM to NFA(not plugin). As we know, if we installed the NFA plugin, we can click the link from OPM to NFA plugin to analysis the interfaces' flow, or we can click the "exchange" from NFA plugin or NFA(not plugin) to OPM. But the NFA plugin can't work well, and I want to use the NFA(not plugin) to analysis the flow, but I found that there was a intergrated problem between OPM and NFA(not plugin), can't directly click the interface of
Single Report for CPU Memory disk and Partition
Hi! Can we get Single report for CPU / Memory / Disk and partition? We are getting individual Report but generaly everyone requires single report. Waiting for Either query or Report. Regards, Dipak Raste
OPManager write to securitylogg in Windows server
Hi OPManager writes to security logg (Eventlogg, login/logout events) every check opmanager do to one Windows server. The problem is that the logfile get ful, and we can´t se other things in the logg, youst opmanagers logins. What can I do, so that Windows server do not write opmanager login/logout to the logg?
Oputils Service is Failing to Start
My oputils server is down, the service will not start: "The ManageEngine OpUtils service terminated unexpectedly. It has done this x time(s)." This started last Friday and support has not called back.....can anyone help? Thank you.
Bandwidth Monitor - E2005
Hi, When trying to add a device to bandwidth monitor I get the following error message, - E2005: Not able to retrieve complete data from the MIB. Any ideas why I receive this message. I am able to do an snmpwalk on all OIDs from the CLI on this box and from other machines, just unable to add the device to bandwidth monitor within OpUtils. Thanks
problem to add a device in OpManager
I am trying to add a device in OpManager, but after the tool indicates that the device was added, type in the ip and it says that the device was not added and prompts you to add, how to fix it? or how can I do to add the device when it happens this problem? OpManager is my version of 8812.
Configure alerts when user access resource
Configure alerts when user access resource
I Cannot Edit my Map or Add new Map
Hi every one I have new Issue First i create a map in opmanager and work fine but when i want to list the devices in the map to see the ip address its show me blank Also when i want to edit or add new map give me blank page please check the images The Map After click on list view to see all ip address When i want to edit or add new map
Hi
Hey, Do u guys know about database back up for devices?
IP address management added to opmanager?
I know there is a great deal of overlap among your products, but opmanager tends to have the broadest scope of capabilities, and in our environment is used by server administrators and network administrators. I think it would be nice to have the ip address management capability added to opmanager. I realize you have oputilities, but much of that product also appears in opmanager, so I don't want to duplicate the application management. I'd rather ip address management be added to opmanager.
Business Snapshot Sort Order
vaguely remember something about this in V6, and did KB search but did not find anything. V7, 7024.. Is there a way to Sort Business views alphabetically? or by hierachy? Maybe a SQL command to re-index? My infrastructure is very broad and seeminly without deleting all business views and starting over, the listing order is very confusing.
Wildcards in workflow
I,m trying OpManager for several days, and it,s OK. My coleagues remind me on one small problem. In new workflow when they miss usage of wildcards for files or folder names. Sample c:\temp\*.dat. Fro example, we check if file is there , or more than 10 minutes. The same thing is in File monitor templates. Also is there any chance to use UNC file names (\\server\share\file) also for files with wildcards. I assume that if workflow can get list of more files in one directory, there should not be any
problem adding server
having problem connecting to server already allowed port 135 and 445 to the firewall. still can't connect...please help
Move hyper-v host to common servers?
Is it possible to add a server with hyper-v without it ending upp as a virtualization host in opm? The hyper-v module is not functioning very well for us with missing/wrong counters and such so we want to add the counters ourselves and be able to adjust nics and so on.
Changing font color in Business View
I currently have a business view with a black background and I was wondering if there is a way to change the font color of the devices to something other than blue?
device template fail to set device partition threshold
Start with a windows 2003 machine with a Partition Details of the Device(%) monitor but no threshold set. Go into device template for windows 2003 and set the partition threshold to 85%. "Apply & Overwrite" using the windows 2003 template to the original windows 2003 machine. The threshold setting for partition details will not get set for the windows 2003 machine. The only way to apply the device template with the partition threshold is to first delete the windows 2003 device and then add
Failed vMotion (Vmware Hosts) with Virtual Center (Virtual Machine with Fault Tolerance) - Worked as a Physical
Hi, Previously OpManager could understand the migration (VMotion) of virtual machines. When a virtual machine was migrated from one host to another host automatically VM info tab (Server Snapshot) appeared the current host name and not the former. Now when a machine is migrated from one host to another, he continues with the old host information. We had some changes in our infrastructure and these may be the cause of these problems. - Virtual Center (The machine was physically and now it is virtual,
Frameworks - custom scope views
Hi, I have 3 elements on the map all on the same subnet. I want to create a custom view where a usere can only see one element that he will be able to manage via elements. can you tell me what scope name option to choose and which property will allow me to just display the single device? The device ip I want to display is 192.168.1.103 Thanks, Dan
ESXi 5
Hi, does opManager 9 build 9011 manage and monitoring Esxi 5 ? Thanks, Sandro
Blue Coat Packet Shaper
Is anyone using OpManager to monitor Blue Coat Packet Shaper? We would like to know when a specific protocol utilizes a percentage of the bandwidth and be alerted upon it. I have the MIBs but they're quite cumbersome to look through. Thanks.
APC Netbotz temp probe readings display in OpManager alarms
I have created a custom category called Temperature Sensors. I then created a custom Device Template called APC Netbotz 200 and added it to the new category Temperature Sensors. Using OID .1.3.6.1.4.1.318 (APC's PowerNet-MIB.mib file) and OpManager's MIB browser I can select the IP address of my APC Netbotz 200 and see all current information (name, serial number, temps, humidity, etc) for the device. My question is this: when an alarm occurs (SNMP trap generated originally from an Unsolicited
Netflow plugin and Switches
Hello We have multiple sites connected via a WAN. We use nortel 5520's and HP's which are switch/Routers. In opmanager they are configured as switches even tho they perform routing function. My question is, can you use the netflow plugin on devices that are not under the router category? Another issue I am having, which I have sent a support request through about is when I try to install the netflow plugin into my opmanager (9010) It tells me that I do not have the correct version of opmanager.
OPM: HTTPS URL Monitoring (certificate problem)
Hi, how is it possible to use URL Monitoring to watch a HTTPS url while its certificate is not registered. When we try we get inactive host. We guess it is not able to get past the certificate verification. What can be done to monitor HTTPS urls? Best regards
Contact support about a issue
Hello Maybe you can help me. I have a open issue Re: [Request ID :##4416690##] : Issues discovering devices using SNMPv3 I am waiting for a remote session today but I havent received any email nor contact from support. I really appreciate your help to resolve my issue. Regards
quick configuration wizard always set "notify only when severity is" to "any" checkbox
Steps to recreate: 1. go into quick configuration wizard 2. choose Assign a notification profile to several devices (Eg. Email Alert, SMS Alert etc.,) 3. in the define criteria for profile page do: check select all click Advanced>> uncheck Any check critical 4 complete the rest of wizard flow to apply the notification to devices of interest Open the device and review the notification profile setting. You'll notice in the Advance section, the Notify only when severity is Any is checked. The
Incorrect 2003 Memory Reporting
I am running several 2003 servers and logging their memory usage. However when I look at the reports they are not correct. Example would be in task mgr I see utilization around 47% yet in OpMgr it is coming back as 69%; same type of thing on another server as 55% & 96%. I have tried to use both SNMP & WMI getting the same results for both.
Adding a service to monitor
When adding a windows service to monitor, is it possible to add just the services for the server you want to monitor and not all the services from the other servers? The little box that opens when adding the windows service to the notification profile is not a very user friendly process. Is it also possible to see all servers that are only running a specific service?
Custom Availabilty Servers Report
Hi, Wish to create a custom availability for the servers report because the existing availability servers report does not meet our requirement. Therefore, intend to do custom report by ourselves. We are able to look at the fields however indicate the number which do not understand. Have attached a drawn report for easier to virtualize. What we need is to tabulate the availability for each month on the same report so that we will know the trend. Does anyone know which field to pull from opsmanger
Delete multiple monitors and Apply/Overwrite does not remove from device
Created new device with zero monitors. Added bulk monitors to a device template. Deleted ALL monitors. Clicked Apply and then Apply and Overwrite to the device with said device template. Go back to Home and select specific device and custom monitors are still associated with device (had to select them and delete them from each device in category).
Moving opmanager to new server
I moved opmanager to a new server yesterday and lost the NetFlow plug in. Do I need to reinstall the NetFlow plug in for OpManager since its been moved? If so, is there anything that needs to be done with the license file?
Categories of servers
Help with such situation. We have 4 Hyper-V servers. On these servers there are 3 servers Exchanage. On a bookmark Virtualizations we add servers Hyper-v. On what bookmark I need to add servers Exchanage that they have appeared in section Servers and in section Exchanage?
Web based rack management product
I would love to see a shelf product that would show physical representation of the datacenter down to the rack level and each peice of equipment in the physical rack. Each rack could be setup with custom U sizing and each piece of equipment type defined to how many U's it is, vendor, and etc. then each item placed in the rack would be selected from the type, fill in a serial number, server name, IP address, notes and etc. With this visual representation of the datacenter and housed server racks
OpManager 9011 have Restrictions on quantity CPU ?
Greetings. It was found out that Opmanager 9011 for servers Cisco UCS B200 M2 (2 x Intel Xeon E5649 6core) shows only 10 kernels, but them there physically 12. It is observed both on Hyper-V Server 2008 R2 Core and on VmWare Esxi 5.0. How it to correct?
Can not remove web alarm
Consistently we are not able to dismiss web alarms. The issue is that everytime a screen refresh occurs the alarm sounds. It is making it a pretty useless tool as we just end up keeping the sound off. We have seen a post that gives a work around to go to the server itself and delete the alarm there. This does work but is not always practical as not all users have admin rights to delete alarms. Is there a permanent fix to this issue? Regards, Nathan
monitoring oracle DB
Hi How do I put up a Oracle DB monitorering in OPmanager?
When will the products be on the market?
Dear OPM Team, When will the Map 2.0 version be on the market? Thanks in advance. YSKO
Next Page