Report on Alerts
Hello, I would like to know if there is any way to generate a Report file with all the alerts that OpManager has active. We would like to also have included the ones that are referred to certificates, monitorization, etc... Thanks.
Unable to find the template for the corresponding model of Cisco wireless controller？
Hello，we use OPM 12.6.121 Our Cisco wireless controller is AIR-CT5520-K9, but we couldn't find this model in the template. How can we obtain and add it.
How to download Probe OpManager V11
I’m looking for a download link for OpManager version 11.0. I’ve been unable to find it on the official website or other sources. If anyone can help with providing a link or directing me to where I can obtain it, I’d really appreciate it! Thanks in
Request for Assistance with Monitoring Interval and Web Page Refresh in OpManager Build 12.8.402
I am reaching out regarding two issues I am currently experiencing with OpManager Build 12.8.402. Case 1: Changing the Monitoring Interval to Seconds I am currently monitoring CPS utilization and memory utilization of a server. The default monitoring
Availability report of device and its interfaces
Hi ALL We have many regionality branches with Cisco routers. Each Router has 2 ISP - optical (Primary) and LTE (secondary) with autofailover. Each if ISP has own VPN-tunel from routed to HQ. I need get availability report of all branche's routers and
Have thoughts on observability? Take the survey and earn a $10 gift card.
Hello there, We're inviting IT leaders—IT leaders, IT/network admin, and software/DevOps engineer—to take the 2025 Observability Survey we hold at ManageEngine, an initiative to create an observability report with ground-level insights into adoption,
OpMgr not following custom monitor
Hi everyone, I have an Extreme Networks 5420 switch that keeps alerting because the "Last Polled Value" is 75 degrees celcius. I have gone into the MONITORS section, edited the device temperature and updated the values so that the first notification shouldn't
Custom SNMP Monitor of ipNetToMediaPhysAddress
Hello, we are trying to monitor a router's ipNetToMediaPhysAddress, what we are trying to achieve is to be able to monitor all the IP addresses assigned by the router, we have done the following: create a custom SNMP on the OID .1.3.6.1.2.1.4.22.1.2 to
Move Application and Database
So my case is . i have old manage engine system monitoring OPManager the application build number 12.4.196 and database mssqslserver 2008 SP2 name is OPManagerDB in different server with application. i already build application in new server with build
Alarms Triggered by Script doesn't get auto clear when next poll says ok
Hi Everyone, I have a question regarding a set of PowerShell scripts I’m using to monitor our Windows 10 devices. Here’s the scenario: I’ve implemented a script that checks the devices listed in Device Manager. If any required device is missing, the script
interface downtime report
I have scheduled a downtime report for interfaces. Now, I want to know: if a specific device goes down, do the monitored interfaces for that device reflect as down in the report? If not, how can I configure OpManager to include interface downtime in such
5 capabilities every IT team should adopt for survival [Free whitepaper]
Hello there, In an era of unprecedented digital transformation, survival of the fittest has never rung more true. To remain competitive, organizations must adapt to changing trends and adopt AI's diverse capabilities for operational sustainability and
Monitoring Uplink/Downlink Ubiquiti
Hello, We are trying to monitor through SNMP the Uplink and Downlink capacity of a Ubiquiti device but when we test the OID to add it it gives us the following error: "No reponse from the device. Check if the device is avaliable or not." The device is
Advik Email Migration Tool
The Advik Email Migration Tool is a versatile and robust software solution designed to help users seamlessly migrate and back up their emails from various email service providers, including Hostinger. This tool is particularly useful for those looking
Java JRE compatible versions
is there a need to keep java JRE in servers those hosted Manager 12.8.188, Device Control plus 11.2.2300.16, NetFlow Analyzer 12.6.135. if yes, what are compatible versions or can I upgrade JRE to latest version normally.
error and discards monitoring
We have several switches. I know i can enable "error" and "discards" monitoring on a specific interface by clicking on that interface, go to configure and enable the thresholds for errors and discards. However, i want to have these options default enabled, for all ethernet interfaces. How can this be accomplished ? Or do i have to select every single ethernet interface from every network device to enable error and discard monitoring ? tnx Sebas
OpManager Enterprise MFA issue
Dears, We've OpManager Enterprise, Central and Prob installed on the same server with different access port, MFA enabled automatically without admin action to enable, and we use Microsoft Authenticator, but when try to login after enter the token provided
How to Break Up Large PST Files for Easier Without Losing Data?
Query: For a few days, my Outlook has been causing issues when I am trying to access PST file data. I am pretty sure this might be because of the large size of my PST file. Now, looking for simple tricks to split my PST file into several parts and reduce
Make a PS script work on OPM
Hello, i have made a simple PS script to check the presence of crash dump files who are replicated on a DFS (and can sature it due to their size) and i want to implement it on OPM to directly have an alarm raised. I have a dedicated service account to
Why you should right-size your IT toolkit
Right-sizing is used in a business context to optimize the efficiency and output of an organization's workforce. It generally involves three steps: Identifying organizational objectives Defining the right amount of people with the right skillsets Hiring,
Add MB, GB disk thresholds to Quick Configuration Wizard
The Quick Configuration Wizard is limited to % Partition space. There should be an option to use the QCW on MB, GB volumes as well. It would give a lot more flexibility to applying granular thresholds, especially to Linux hosts, without using the Template
Linux Disk Space Monitoring
We are currently using CLI to monitor disk usage on our RHEL environment. The problem is it adds ALL volumes then even the relatively useless ones like usr, boot, dev, etc. This makes it difficult to have a threshold monitor because it gets applied to
OpManager - Observability & Dashboards
Dear Team, do you have any plans to improve Observability & Dashboards of Opmanager? Currently OpManager is "oldschool" monitoring system where is absent modern views and dashboards about infrastructure state. Could you internally discus about adding/changing
Discover Riva Residence: The Ultimate Waterfront Living Experience in Dubai Maritime City
Dubai is renowned for its luxurious lifestyle, breathtaking architecture, and stunning waterfront properties. Among the city’s prime developments, Riva Residence in Dubai Maritime City stands out as an epitome of elegance, comfort, and modern luxury.
UNABLE TO LOAD LICENSE
Encountering this error kindly assist: Microsoft Windows [Version 10.0.14393] (c) 2016 Microsoft Corporation. All rights reserved. C:\Program Files\ManageEngine\OpManagerCentral\bin>shutdown.bat C:\Program Files\ManageEngine\OpManagerCentral\bin>stopPGSQL.bat
Cisco ISR 1100 SDWAN SNMP template usage problem
I'm trying to associate our SNMP v3 credentials that we used without problems, to new devices and new device models. Cisco 1120 ISR with SDWAN is in question, properly configured with SNMP v3 credentials, we see traffic from opmanager to end devices,
Syslog Rule not working
Hey, we want OpManager to create alarms/events when receiving specific syslog messages sent by Palo Alto Networks Firewalls. Incoming syslog messages can be observed however the corresponding syslog rule won't trigger any event. Regex experience is limited
Consultation on Workflow
Hello,May I ask if there is support for closed-loop workflow? At present, the indications of each module cannot be connected.
Deactive License
Hello, I want to make a new fresh server for opmanager, should i deactivate the license on old server? How i can do this?
Discards rate for Interface 'Adaptive Security Appliance
After patching our two ASA 5525's that are in an HA pair OpManager started triggering this alert. We tracked down the discards to two Meraki MR33's we have in the office communicating with each other for load balancing. What we've been trying to figure
Master IP address management with OpUtils
Hello from ManageEngine! You're invited to our free OpUtils training session where you'll gain expert knowledge and practical skills to manage your network's IP addresses, DHCP servers, switch ports, and rogue devices. Learn how to enhance your network
Join Us at ManageEngine ITOM Day Madrid!
Digital transformation is at the forefront for many Spanish companies, with 65% planning to boost their budgets in this area by 2024 (IDC Madrid). As IT landscapes grow more complex, reactive problem-solving just doesn’t cut it anymore. That’s where full-stack
Error
I see this error on opmanager You are not allowed to apply this license with HighPerf(Vectorwise) or DPI addon in HighPerf(CStore) installed setup, contact our support for further details.
Teams integration: Ability to configure URL separately from hostname
We need the ability to set the url the server is configured for, separately from the hostname. For instance, we're using the Enterprise version and have a central server along with probes. In my case we're using the Teams integration to push severe alerts
What are the different manual ways to convert OST file to PST format?
If you are an Outlook user then you are aware of these file formats. If not, then you should know that an OST file is defined as a local copy of the information of that enables users to access your synchronized data without any internet connection. When
How to backup Google Workspace mailbox?
All the users who wish to backup Google Workspace mailbox are looking for a perfect utility to commence the task smoothly. Various tools are available for the users, but users search for a trustworthy agency to complete the job easily. Although the study
Shipping A Car Overseas - What Would You Take?
I'm shipping a 2016.5 CX-5 Touring AWD from the USA to Uzbekistan for a few years. It currently has about 31,000 miles on it. Tech and Navigation options, which includes the LED lights. I'm also planning to send a bunch of oil change kits, a new set of
Local Server hosted website checker
Hi, Does ManageEngine offer a solution for checking a locally hosted website? I have a local server that hosts an application and looking for something that can check the URL and if the site is down send an email notification
Email Notification for specific interface down from different Cisco devices
Hi all. We have many access switches in our network. Access ports go up and down several times a day. We get a lot of alarms and those are difficult to maintain. However, I have separated some important interfaces and want to generate email notifications only if these interfaces go down. But while creating notification profile, i could not find any option to choose specific interface; only whole device can be added to notification profile. If anyone knows how to add only specific interfaces of some
Facing Some Issues with Intel Arc GPU and ManageEngine OpManager 12.5 – Any Advice?
Hey member, I’m encountering some issues with my Intel Arc GPU when using it alongside ManageEngine OpManager 12.5. The main problem I’m facing is system lag and display glitches, especially when running resource-intensive tasks or using OpManager for
Next Page