Failed vMotion (Vmware Hosts) with Virtual Center (Virtual Machine with Fault Tolerance) - Worked as a Physical
Hi, Previously OpManager could understand the migration (VMotion) of virtual machines. When a virtual machine was migrated from one host to another host automatically VM info tab (Server Snapshot) appeared the current host name and not the former. Now when a machine is migrated from one host to another, he continues with the old host information. We had some changes in our infrastructure and these may be the cause of these problems. - Virtual Center (The machine was physically and now it is virtual,
Frameworks - custom scope views
Hi, I have 3 elements on the map all on the same subnet. I want to create a custom view where a usere can only see one element that he will be able to manage via elements. can you tell me what scope name option to choose and which property will allow me to just display the single device? The device ip I want to display is 192.168.1.103 Thanks, Dan
ESXi 5
Hi, does opManager 9 build 9011 manage and monitoring Esxi 5 ? Thanks, Sandro
Blue Coat Packet Shaper
Is anyone using OpManager to monitor Blue Coat Packet Shaper? We would like to know when a specific protocol utilizes a percentage of the bandwidth and be alerted upon it. I have the MIBs but they're quite cumbersome to look through. Thanks.
APC Netbotz temp probe readings display in OpManager alarms
I have created a custom category called Temperature Sensors. I then created a custom Device Template called APC Netbotz 200 and added it to the new category Temperature Sensors. Using OID .1.3.6.1.4.1.318 (APC's PowerNet-MIB.mib file) and OpManager's MIB browser I can select the IP address of my APC Netbotz 200 and see all current information (name, serial number, temps, humidity, etc) for the device. My question is this: when an alarm occurs (SNMP trap generated originally from an Unsolicited
Netflow plugin and Switches
Hello We have multiple sites connected via a WAN. We use nortel 5520's and HP's which are switch/Routers. In opmanager they are configured as switches even tho they perform routing function. My question is, can you use the netflow plugin on devices that are not under the router category? Another issue I am having, which I have sent a support request through about is when I try to install the netflow plugin into my opmanager (9010) It tells me that I do not have the correct version of opmanager.
OPM: HTTPS URL Monitoring (certificate problem)
Hi, how is it possible to use URL Monitoring to watch a HTTPS url while its certificate is not registered. When we try we get inactive host. We guess it is not able to get past the certificate verification. What can be done to monitor HTTPS urls? Best regards
Contact support about a issue
Hello Maybe you can help me. I have a open issue Re: [Request ID :##4416690##] : Issues discovering devices using SNMPv3 I am waiting for a remote session today but I havent received any email nor contact from support. I really appreciate your help to resolve my issue. Regards
quick configuration wizard always set "notify only when severity is" to "any" checkbox
Steps to recreate: 1. go into quick configuration wizard 2. choose Assign a notification profile to several devices (Eg. Email Alert, SMS Alert etc.,) 3. in the define criteria for profile page do: check select all click Advanced>> uncheck Any check critical 4 complete the rest of wizard flow to apply the notification to devices of interest Open the device and review the notification profile setting. You'll notice in the Advance section, the Notify only when severity is Any is checked. The
Incorrect 2003 Memory Reporting
I am running several 2003 servers and logging their memory usage. However when I look at the reports they are not correct. Example would be in task mgr I see utilization around 47% yet in OpMgr it is coming back as 69%; same type of thing on another server as 55% & 96%. I have tried to use both SNMP & WMI getting the same results for both.
Adding a service to monitor
When adding a windows service to monitor, is it possible to add just the services for the server you want to monitor and not all the services from the other servers? The little box that opens when adding the windows service to the notification profile is not a very user friendly process. Is it also possible to see all servers that are only running a specific service?
Custom Availabilty Servers Report
Hi, Wish to create a custom availability for the servers report because the existing availability servers report does not meet our requirement. Therefore, intend to do custom report by ourselves. We are able to look at the fields however indicate the number which do not understand. Have attached a drawn report for easier to virtualize. What we need is to tabulate the availability for each month on the same report so that we will know the trend. Does anyone know which field to pull from opsmanger
Delete multiple monitors and Apply/Overwrite does not remove from device
Created new device with zero monitors. Added bulk monitors to a device template. Deleted ALL monitors. Clicked Apply and then Apply and Overwrite to the device with said device template. Go back to Home and select specific device and custom monitors are still associated with device (had to select them and delete them from each device in category).
Moving opmanager to new server
I moved opmanager to a new server yesterday and lost the NetFlow plug in. Do I need to reinstall the NetFlow plug in for OpManager since its been moved? If so, is there anything that needs to be done with the license file?
Categories of servers
Help with such situation. We have 4 Hyper-V servers. On these servers there are 3 servers Exchanage. On a bookmark Virtualizations we add servers Hyper-v. On what bookmark I need to add servers Exchanage that they have appeared in section Servers and in section Exchanage?
Web based rack management product
I would love to see a shelf product that would show physical representation of the datacenter down to the rack level and each peice of equipment in the physical rack. Each rack could be setup with custom U sizing and each piece of equipment type defined to how many U's it is, vendor, and etc. then each item placed in the rack would be selected from the type, fill in a serial number, server name, IP address, notes and etc. With this visual representation of the datacenter and housed server racks
OpManager 9011 have Restrictions on quantity CPU ?
Greetings. It was found out that Opmanager 9011 for servers Cisco UCS B200 M2 (2 x Intel Xeon E5649 6core) shows only 10 kernels, but them there physically 12. It is observed both on Hyper-V Server 2008 R2 Core and on VmWare Esxi 5.0. How it to correct?
Can not remove web alarm
Consistently we are not able to dismiss web alarms. The issue is that everytime a screen refresh occurs the alarm sounds. It is making it a pretty useless tool as we just end up keeping the sound off. We have seen a post that gives a work around to go to the server itself and delete the alarm there. This does work but is not always practical as not all users have admin rights to delete alarms. Is there a permanent fix to this issue? Regards, Nathan
monitoring oracle DB
Hi How do I put up a Oracle DB monitorering in OPmanager?
When will the products be on the market?
Dear OPM Team, When will the Map 2.0 version be on the market? Thanks in advance. YSKO
problem monitoring localhost (where opmanager is installed)
I got this error: User credentials cannot be used for local connections Following this tip doesn't work: http://www.manageengine.com/network-monitoring/help/troubleshoot_opmanager/troubleshoot_wmi.html#80041064 There are 2 problems: 1. After I removed the windows credential, I can no longer add any new wmi monitors. I get error message saying I need to supply username and password. 2. I cannot use device template I found a work around by specifying a dummy username/password. However, it doesn't
There is no possibility to add new device or device is present.
I searched for the decision of the problem and have come across it: http://support.opmanager.com/sd/AddSolution.sd?solID=1808 But these scripts of cleaning of base are not suitablefor MS SQL, but only for mysql. Where can I get a utility for MS SQL 2008 + OpManager 9011? And another question, is there any way to verify the integrity of the database OpManager ? Thank you!
monitoring tablespaces in oracle 10g
i have tested my credentials for both CLI and SNMP for my Oracle server running in Linux and they have passed. I have added the monitoring tools for tablespaces and nothing is being monitored. i have used the mibbrowser tool to test ORADB-MIB and i am getting 'Request failed or timed out. No error'.. what am i missing out? regards
The DB of Probe OPM has been destroyed
Hi support team, Yesterday I have backed up the DB of standalone OPM(8812), and then upgraded it to v9010, backed it up and then upgraded to v9011, and then backed it up. According to the link"https://opmanageree.wiki.zoho.com/Standalone-to-Probe-Migration.html", I migrated the standalone OPM to Probe OPM. After migration, I started the service and input "localhost" in address, it said that some tables of DB have been destroyed and please run the "RepairDB.bat/sh" to repair the DB, then
Ability to select one of switches/routers devices.
Dear All, Ability to monitor for selecting only major ports in the several devices(Switches/Routers) in Widget. - Table or Graph in realtime. For example, Thank you in advance.
OpManager and VMware
How can I disable alarms on ESX Servers when a VM is powered off? Thanks in advance Fabio
Crystal Reports with OpManager
Hi ! We're researching the use of Crystal Reports to generate reports from the OpManager database. But there are so much tables in the database, that we're wondering if there is some overview where is outlined what information is stored in which table and how. This would make the process mich easier.. I hope somebody has this outline. With kind regards, Martijn Janssen
who can share the service package of 9010
Now I am testing the Enterprise version of OPM, and want to have the service package of 9010 to upgrade my OPM standalone v8812, then migrate it to probe. I have submited the form and waited some times. My customers has urged me all the time. So I want to know where the download link is or who can offer and hope you can share with me Thanks and Regards, Tira
Upgrade Netflow plug-in to 9000
My Opmanager build is 8812 and when upgrading the plug-in with UpdateManager (.\NetFlow\bin) it starts the upgrade, but there is now progress. I have encountered this problem before (I had to reinstall a previous build from opmanger to restore our latest back-up and upgrade again) and the support engineer (Tim Woods) stated the following: ".... It seems that the RAW data stored is very huge, it will take time to delete all the raw data entry. So, please allow the updatemanager to run, once it complete
my devices are in the maintentance mode !! how to change its mode to normal?
Availability How to change the mode to let us monitor this device ? Thanks!! //Oyster Liu oysterliu@gmail.com
OPMANAGER - Mail server settings.
Hi Friends, I'm using the latest Opmanager version (Free Account) and I'd like to know how to configure the maisl server settings for a google (gmail) account. I'm receiveing the following error: "530 5.7.0. Must issue a STARTTLS command first. b4sm55998828and.18" Observation: I've have checked the option SSL ENABLED but didn't work. What I'm doing wrong? Thanks a lot! Att, André Mascarenhas
Can't install the enterprise netflow analyzer plugin
Hi support team, I want to test the netflow analyzer plugin with the OPM Enterprise central edition in one server , but when installing the plugin, it said i have to upgrade the opm to the lastest version and then install the plugin. But my OPM enterprise edition is the latest version 9011 64bit and the plugin is 9000 64bit why? Thanks and Regards, Tira
server monitor (performance monitor)
i cannot monitor 05 monitors in server monitor Bytes Received Bytes Total Bytes Transmitted Traffic received Traffic transmitted
VMware Threshold Alerts
Hi I have setup my VMware 3.5.0 host servers on OpManger (9011) and configured the notification profiles to send when 1 poll is missed and when any Threshold Rule is violated. However no alerts are being sent. When I check what is covered under the threshold setting it tells me that I don't have any set, even though they were automatically setup during discovery. Am I missing something very obvious here? Cheers.
LoadXML
After dicovering devices I keep getting a loadxml error.
Adding new sub interface
We face problem in adding new sub interface for the existing router,opmanager see the subinterface but N/A . why this is happening
Hyper-V in OpManager 9
I added two Hyper-V Hosts that are part of a two node cluster. Metrics are collected and displayed on the Host Servers but none of the VMs are collecting except for one per Host. The one per Host, which is collecting, is not collecting or displaying correctly.History reports reflect the same problem, only one VM shows up. If I failover the VM that does collect (but incorrectly) it moves to the other Node but still does not collect correctly.
How to monitorig disk queue length?
I need to do monitoring disk queue length on win2k3 & linux OpenSuSe11.3 servers. It is possible? If yes, then how? Help pls )
URL-Monitoring does not work with dependency
Hello together, i have the problem that my dependencys are not working with the URL-Monitoring configured on several server. That means i will not get any alarm-message if the server is not available if the dependend device is not available, that�s correct. But i will get a false-alarm regarding the URL-Monitor configured on the same server. Can anyone tell me how to configure that the dependency is also working with URL-Monitors in the serveral server? What i am doing wrong? Greetings Peter
Enabling SSL
Is the method detailed here under Getting Started - Enabling SSL in OpManager still the way to do it? I thought this had been superseded?
Next Page