how to monitor sun blades in opmanager
Hi Team, I want to monitor sun blades through oracle integrated lights out (oilo) ip. I have added the sun blades and opmanager successfully captured the details but it is not showing data in cpu, disk and other performance monitors. Regards Abhishek
WMI failed
I get this error message on most of my machines however with same domain admin credentials WMI pass on some machines I have tried the troubleshooting guides of OPmanager. Please help ?
Unmanaged devices
Unmanaged devices count as a 'used' licence. We have a few LAB VMWare servers with about a hundred machines that are purely lab machines, testing and simulation servers... How can I set them in 'unmanaged' state but without using a licence? I only need to monitor the hosts in this case, not the virtual machines they host.
Alerts Dependency
Is there any way to stop URL Monitor Alerts when Web Service is down? We get both type of alerts. Ideally if IIS/Apache is down, we should only get alerts for the service & not for URL monitors as it obvious they'll be down
The history of device
after I had recreated a router i had lost the history of this device. is this history could be back?
95th percentile reports of CPU and Memory utilization
Hi there, Is it possible to create a 95th percentile report of CPU and Memory usage by device in OpManager? The report showing Min, Max, Avg really isn't very helpful because when you are capacity planning, what you care about is "typical peak" utilization. It would also be great if CPU and Memory could be combined into one report, but if they have to be separate, so be it. Thanks, Andy
unable to retrieve windows 2003 snmp cpu utilization data
Hi, I need help with configuring windows 2003 with snmp. This is not a OpManager issue. I am not able to retrieve snmp cpu utilization data from a windows 2003 machine. I have installed snmp service and verified the snmp credential is correct. However, I am not able to get snmp cpu utilization (.1.3.6.1.2.1.25.3.3.1.2) from the machine. Note that I am able to retrieve this information from a windows 2008 machine. Using a snmp tester tool, I got following from the 2003 machine: 1/30/2012 5:52:49
Symantec EndPoint Protection
2 Weeks ago I installed Symantec Endpoint Protection and Manager on the server that I also have OpManager on. Ever since I have done this the SEPP has killed OpManager, not allowing it to run. I contacted support on this subject and they logged into my server and shutdown the SEPP and then started OpManager and it worked but when I start the SEPP back up here is the message that I get from OpManager: Internal Server Error The server encountered an internal error or misconfiguration and was unable
OpManager, unmonitored services on server raise alarms
Hi every OpManager Users and supporter, For a more or less long time i have a strange behaviour. I got some particular alarms concerning a service, which is NOT monitored on the server from where the alarms come (and the service ITSELF doesn't run on the server) In the screenshot, i got an alarm that pervasive SQL service is down on the server XXXXXX,... but as you can see, THIS service is not monitored on the XXXXXX server (but it runs and is monitored on another one...which was NOT down...) How
sms profile
Hello. We install a trial version of Your product Opmanager 8, and testing, is it that software , what we want , a then bought it or. I want to ask, is it possible to create a SMS notification profile, that contains a 3-4 mobile number, like as a email group. CAn anybody help me, please
unable to edit or delete credential with \
If the name contains \ character, the credential can not be edit or deleted.
SMS
Hi I'm having a problem with the GSM Modem, I can't connect it to opmanager It works fine if i connect to COM1 (9600) .. AT OK AT+CGMI SIEMENS OK AT+CGMM TC35i OK AT+CGMR REVISION 03.01 OK AT+CSQ +CSQ: 28,99 OK But with opmanager, it says "Modem is not connected properly. Check your settings!" On the config file SMSServer.conf ... phone.batch_incoming=-1 sms_split=true phone.batch_outgoing=-1 phone.sim_pin= serial.port=COM1 database.type=MYSQL phone.delete_after_processing=no general.raw_in_log=./misc/incoming.raw
Exception while loading MIB for Cisco MDS 9000
I am trying to import a Cisco MIB (CISCO-SYSTEM-EXT-MIB) into OpManager and I am getting an error: Error parsing MIB:CISCO-SYSTEM-EXT-MIB.my Exception while loading MIB:IMPORTS failed: Could not find the file : D:/Apps/OPMANA~1/./mibs/CISCO-TC I am attaching the MIB in question. Regards, Eugene
Trending Disk Growth, CPU Utilization,etc.
I'm new to the product so excuse my ignorance. I would like to be able to report on a monthly basis the following: VMware Virtual Machines (Individual Machines grouped by OS - Windows and Linux) Disk Space Allocated Disk Space Used Disk Space Free Memory Allocated CPU Utilization ESXi Hosts Datastore Space Size Datastore Free Space Datastore Provisioned Space I have not been able to find this information within the "canned" reports. Is this information stored in the database where a custom
ManageEngine vs Orion vs Spiceworks
Is there a comparison chart that someone can point me to? Thanks Sam
Launching RESOURCES for template sharing
Hi everybody To make it easier to share templates across ManageEngine customers we have opened up a new portal called RESOURCES. See picture below. If you are using OpManager you can now export your script monitors and workflows as XML and share it with fellow users here. For now the sharing is manual where you have to do the Create new resource, attach xml, and post job. Also the sharing is restricted only to scripts and workflows. (monitoring templates not available now) Going forward when we release
Any way to edit multiple notification profiles?
Hi, I have around 20 notification profiles (SMS) and around 30 devices on them. I want to change the poll from 5 to 3 but the only way i found is with the wizard on admin section, but i need to remove all and add all again, But I have more then 100 devices and have to choose manually from them, now multiply 100x20 and you imagine the trouble in front of me :S thanks in advance. best regards, Nuno Franco
Device URL required in Email alert for direct Redirecting to the device //Opmanager
Hi Team, we require option like if any email alert s send it should have URL of the Network Device ( Example: http://172.16.0.1) where we can login directly to the device, is this Option is enabled on Opmanager Build Number : 9000 ? but this option is available after loging into the OPmanager we need that option on EMail alert as well. Regards, Karthik
Increase Response Timing
Hi, I just have migrated OP manager behind Cisco ASA firewall but after that we are getting increment in devices response time which was working very much fine when OP manager installed over lan. Speed and duplex is fine on OP manager machine. Kindly do the needful Regards, Arshad Ahmed
32vs64 ??
Hello, Is it possible to migrate database from 64 bit to 32 bit version and vice versa? What does 64-bit version compared to the 32-bit? txh
Windows Evenlog monitoring
Hi all, There are many built-in "eventlog rule" in OpManager. I searched internet and found that for same event(e.g. new user account created), the event id in windows 2003 and 2008 are different. In OpManager, which windows version correspond with the default rule ? Best Regards, Simon Wong
No Custom Links Tab on Hyper V Host - OpManager Version 9
Hi We use the "Custom Links" tab on servers to add ILO links, management page links etc. This tabl is not available on VM Hosts? Is there any way around this? regards
Switch ports reporting trouble when link up or down
I know there has been a lot of talk regarding this topic but I am still having trouble finding how to do it. My switch ports report "trouble" when the port link goes up or down (IE. someone turns off their computer). for example: Interface 'Ethernet Interface-g19' is down. I still want to monitor that port for critical alerts like this one: Critical Dec 15,2011 12:56:23 PM Interface 'Ethernet Interface-g19' is shutdown. Is there a way to surrpress ONLY that trouble alert or reclassify it to something
Opmanager eventlog threshold
we have an issue where some pc's (already deployed) the security log will fill up. is there a way to set a threshold on this so that when it hits like 95% we can identify the pc , and take corrective actions thanks mike
use csv file to specify multiple ip ranges for device discovery
Is it possible to use a csv file to specify multiple ranges for device discovery? My network has multiple subnets with private ip address blocks. It would be great if I can record these ip address blocks in a csv file and automatically run device discovery for every block.
I lose the history of traffic . what can i do?
After i had recreated a route i lose the history of trrafic . what can i do?
log file monitoring
Hi, Our customer is asking if log file monitoring is now included on OpManager v9? According to our client they signup OpManager 9 beta program and they registered succesfully. And Dev Anand Product Manager – OpManager gave the links for the Log File Monitoring .exe and the video guide to our customer. http://www.youtube.com/watch?v=H_VojxLhSr0&feature=youtu.be Log file monitoring: Windows: http://bonitas.zohocorp.com/customer_uploads/2011_12_28_12_48_28_ManageEngine_OpManager.exe Our customer
machine types
Is there a way to see the machine type/os from the dashboard page of each machine, including CPU count, installed memory, etc? This would be a great feature.
Custom Script monitors in OpManager - Some examples, documentation needed
Hi all. I've been playing around with trying to port some Perl, bash scripts etc. from an old Nagios instance (Which by the way, seems to support custom scripting a heck of a lot better than OpManager from what I can see!) with the intention of decommissioning nagios eventually. So far however, I haven't gotten very far at all, as each time I try a custom script (Perl, PowerShell etc.) I seem to always get some obscure error of one kind or the other. Can you please provide some actual working examples
IP Routing Table
Hi There, We were always able to access the IP Routing Table for a router from Opmanager. In the last few releases including the new one this is not available any more. Is it a configuration problem on my side or has this feature dissapeared from Opmanager? Regards, Rudolf
Threshold Value issue on opmanager
We have added our wireless device on OpManager for monitoring in that we have set threshold value 90% to send alarm and re-alarm value as 85%, but I am getting alert for 30% for same interface Below are the snapshots. I have searched almost all the options but couldn’t find the settings, I am randomly getting similar alarms for few server’s , VM Device’s & Wireless Device’s. Please let me know the solution. Regards, Karthik
Dial graphs for cpu and memory utilization are not seen
Hi. I am using opmanager 9 build number 9010. i have added cisco 3560 catalyst switch and enabled snmp on the device. i can verify the snmp credential from device snapshot page. i also verified it from mibrowser.bat under RFC mib sysoid . to make sure i re added performance monitors to the device.but when i edit performance monitor and cilick test monitor. it says "The monitor did not respond to the test request ". Thanks.
Precision Air Conditioner monitoring.
Dear Team, Can we monitor temperature of Precision Air Conditioner of data center. Regards Abhishek
Timestamp different
Hi...Having some issues with the Timestamp for the alarms and other things in the system. Opmanager it self shows the correct format "20 Jan 2012, 14 : 48 : 32 CET" but the alarms shows "Jan 20,2012 02:43:55 PM" How can I change the alarm timestamp so it shows the 24 hour time insted of 12 hour?
API for IP Address Management
We are pleased to announce the availability of API for accessing the IP Address Manager data from OpUtils. This means you can programatically connect to the OpUtils database to fetch the details of your IP Space. The initial version will let you get the following details: Summary of all you Subnets Summary of a specific Subnet Details of all IP Addresses of a Subnet Details of a Specifc IP Address Details of a range of IP Addresses The information will be provided in an easy-to-interpret XML format.
Unable to Restore OPmanager backup
I have Operating OP manager over Windows XP (32 Bits), i have taken backup using data maintenance backup utility and try to restore on windows 2008 server so its generate some SQL error. Kindly find attached snap for understanding and help in this regards, Regards, Arshad Ahmed
Folder monitoring template for newly created folders
Is there a way to set up a Folder Monitoring Template when a new folder has been created on the C: drive?
OPManager
OPManager can generate a report with exact time the server/s down?
Installing OpManager 8.0 on ubuntu 10.10
Hello everyone how are you? I'm trying to install OpManager on Linux 8.0 Need help because when I run the script: StartOpManagerClient.sh nothing appears loading ... In fact none of the scripts run command to run I used was: root # /opt/AdventNet/ME/OpManager/bin/StartOpManager.sh two follow these procedures: http://www.debianadmin.com/monitoring-serversnetwork-devices-with-opmanager.html # more-356 http://www.manageengine.com/network-monitoring/installing_opmanager.html
SNMP Community Name Issue with '%' Symbol
Hi, I have a read-only SNMP community name for a Cisco router and it has a mixture of numbers, letters and symbols in it. OpManager is having a problem with the '%' symbol as it is excepted but then adds a '\' to the community obviously then stopping SNMP from working. I can't change the community name as it isn't managed by myself. Is there anyway around this issue? Thanks. Pete.
Next Page