APC UPS
We have 5 APC SMARTUPS 3000 with management cards on 3 networks (172.16.x.x , 192.168.58.x , 192.168.3.x ) The first 3 are about 2 years old, one is 6 month and the last one is 1 month old. The only one opmanager is adding with the blue star is the last one, its adding the other 4 as Desktop pc. I compared the 5 APC web interfaces and the settings are the same. SNMP is enabled with string public and the ip from the machine with opmanager installed. Do I have to type til apc/apc logon in the Password
Apache exits when I log out
I installed Opmanager 6 on Windows 2003 Server 64bit Edition. It seems that when I log into the box locally or via terminal services (mstsc /console) and I log out, Apache exits which terminates http access to OpManager. It still collects stats and monitors devices though. Even if OpManager is started from the service control panel, the result is the same.
UPS Graceful Shutdown via Opmanager
I can setup a Custom Monitor via the PowerNet MIB so I know what the battery temperature is, and can therefore set a threshold and generate an event. What I would like to do now is send an SNMP put command to instruct the UPS to go into Graceful Shutdown. Is there a nice simple way of doing this?
PIX Classified as Desktop?
Furthermore, only one of the interfaces are being managed. I am unable to manage the other two interfaces as the button to do so is greyed out and says unmanaged.
CPU Utilization Snapshot --- Incorrect with Processor % Time
Hi I don't understand why the change in using Percentage Processor Time for Domain Controllers, for pupulating the Snapshot CPU Utilization % Dial. I can confirm that the data I'm getting makes no sense, and seems quite incorrect. Attached find snapshots of actual processor utilization as seen from the server's Task Manager | Performance Monitor -vs Opmanager's report which I was updating and looking at at the same time. We have 10 Domain Controllers, and I'm not keen on pursuing these new Domain
No CPU Utilization dial displayed for Cisco switches
Hey guys, Still evalutating OpManager and getting people enthusiastic about it within the company. It's very slick looking and really allows us to make certain things a lot more clear. I'm having a slight problem though. For some reason, the CPU Utilization dial won't display for most (all) of my Cisco switches. All devices are SNMP enabled, and show the little blue mark indicating as much. A parameter test comes back succesful as well, and data is being collected. However, still no joy, and no dial
mod_jk.so
We were sent instructions on how to incorporate a newer version of Apache with our OpMan 6 setup, and one of the steps is: A mod_jk.so file should be produced thats compatible with OPM's tomcat version() and the system's apache version and should be placed under the directory <SystemApacheHome>/modules.Here the SystemApacheHome should be the same as that of ServerRoot variable.(Contact ur SysAdmin guys to get that file).If the mod_jk.so file is placed somewhere else under the SytemApche then that
UPS monitoring
Is there a way to monitor APC ups connected via USB? Thanks a lot.
Cookies problem
I am getting the follwing error when i access the Application Manager URL Cookies are disabled in your Web Browser. Please Enable Cookies and click
how I configure or add "service down" like a trap?
In my opmanager application I configure a server time monitor equal = 30 min. To minimize a bandwith use. We have 100 server aproxim. When a windows service is down I have to wait 30 min to receive a alarm. Service Down dont exist in traps list. How I can add this event like a trap? Thank
Installed Software
I've got a system that doesn't show all the installed software when I click on Installed software on the device page. What's wrong, is there some way to get OpManager to collect this data again (periodically?)
problem in monitoring device
ive downloaded the free trial op manager n tried some features through.. but, im lil bit confuse.. how can i add and monitor another device xcept the device in my own local address..? plizz.. help me.. regards,
Memory Utilization % on Linux
would like to know how is calculed this value because I don't understand. For example, I monitor my linux server using cli - ssh, I get around 11% of memory utlization but values of real is 98%. Why this value not same with real condition Configuration in HostResource.xml : <CATEGORY ID="Memory Utilization" command="/usr/bin/free -b" parseAll="false" description="Percentage of Cache Memory, Buffer Memory and Total Memory."> <ENTITY ID="PhysicalMemUtilization" applyThresholdOver="100 -(((MemFree +
SNMP monitor problem
Hello, I'm trying to get the call history table off of a Cisco IAD2431 but I get the message to pick an OID when I select .1.3.6.1.4.1.9.9.27.1.1.3 which is the OID for the CiscoCallHistoryTable. I need to to pull the entire table, is there anyway to do this?? I am attaching the MIB I am trying to get the info from.
Alarm log
Hi, Is it possible to configure OpManager to display the full trap message in the alarm log? When a trap is received from the wireless switch OpManager does not display the last line which contains the most important piece of information that is the access point name an IP address. If we configure Opmanager to send the trap via email then all required information are displayed. Bellow are 2 samples of the trap. The first is from the alarm log and the second received via email. wlsxAccessPointIsUp
Running OpUtils on the same server as Opmanager
I am trying to run both programs on the same Redhat 3 server but if I startup OpUtils on the default port and Opmanager runs on 9090, it runs for a few hours then both OpUtils and OpManager stop responding. I'm running it on a dual 3.06ghz with 3 GB ram and the server has very little load on it. How do I run both of these programs on the same server? Thanks!
Bridge MIB Error with a switch device
Dear all, I'm trying OpUtils 3.2 version and I have de following error when I add A switch device (Summi Extreme 48Si): E2005: Not able to retrieve complete data from the MIB - BRIDGE MIB Ci-attached a screen capture Can you please help me. Regards fernando
Problems with snmp --- OID not implemented???
hi First i'm using Linux(manager),and windows XP (agent), my problem is that ... when I configure a Monitor report such as DiskUtilization or CPU Utilization .... I can see nothing, the snmp protocol has been installed in windows machine but when i do a test monitor, it says "The Monitor did not respond to the test request", if i do another thing such as coldstart... it works. So I think the problem is "The OID may not have been implemented in the MIB". could be? I need help, please.... thanks
error when loading MIB
I am using opmanager version 6 and I keep getting this error when I try to load a vendor mib. The error get is "Error parsing MIB:axis-mib", I can load this mib fine using mibbrowser.bat but through the web interface it always give me this error. I am trying to create a custom monitor but it want load this mib. Any help is appreciated.
Deleted Device data
Hi, I have accidentally deleted one of my db server from OpManage and then add it back. But all previous data (e.g. CPU, Memory, Disk util) related to that box has been lost. Is there any way I can have all the previous data back?? Or does it delete all the releated data along with the device? ~/Ovi
Device associated URL monitors -- problems with maintenance
I have a couple development / testing servers which each have about 9 URL monitors listed under them. I have reocurring maintenance downtime scheduled for Wednesdays at 4:45am on those devices. Today the maintenance was performed 2 minutes early, so we received several "service down" notifications for the URLs, which btw, on the notification profile URL category is not checked. So once the maintenance cycle came into effect the device was unmanaged during this period. The maintenance completed at
Database connectivity between TL1 Agent and MYSQL
hi, I'm learning TL1 with Adventnet TL1 simulators . How the connection between TL1 manager and the DataBase (MySQL) can be established? How can I retrive data from tables ? In that case what should be the AID? what should be in payload? Any help would be appriciated. regards, jona
Notification Profile Issue
I am trying to setup a notification profile that sends an email only if a threshold value has been exceeded. Attached is the notification profile setup. I've associated this notification profile to a couple of devices, but when the threshold (WMI disk space in MB) gets exceeded, no email comes through. I have tested this address through the "mail settings" page and it works fine. Possibly complicating things, is that I have two notification profiles setup on each of these devices. The first sends
Monitoring RSSI with Trangolnk10 radios
The mibs for these radios load fine. The problem is that I cannot use OPmanager to monitor RSSI. The mib is unavailable for use but some of the others mibs are available. Is it because the value returned is negative? Has anyone been able to get it to work? If so how? Did you have to modify the mib for it? I am using the mibs provided by the manufacturer. I have gotten them to work in other programs but I would prefer to monitor all my equipment in OpManager. Your help is appreciated. Thanks, Jeff
problems with snmp and unix/linux desktops/servers
Hi folks, I've to monitor servers/desktops debian and freebsd, but I've problems with snmpd.conf (I've configured that, but it doesn't work as I would). Could you show me an example of snmpd.conf for freebsd and for debian, if you please? Thanks for your support, any advice will be appreciated Regards Andrea
SNMP trap port error
When I try to set the SNMP trap port to 162 I get an error saying E5003: Unable to bind to port. - 162. Can you please help.
Fedora 4 cannot start opmanager
Hi : I use fedora 4 to install opmanager 6 but cannot start opmanager,can you help me #Unable to start Mysql daemon #Unable to create datebase exiting opmanager
Associate Custom Monitors
I have two Foretinet firewalls one running firmware 2.8 and one running firmware 2.5. The 2.8 works well (except for a problem reporting the correct interfaces and their status...but I am working on that elsewhere). The problem I have is that the standard Fortinet CPU, Memory and session count Resource Monitors do not work. I have a set up three custom monitors to gather this information and they are working well. My question is, is it possible to assign those graphs to the three graphs at the top
Wrong IF Numbers with OpManager 5.6
I am having the same problem with my FGT60. I am using 5.6 build 5601. WAN2 is showing as WAN1 and it is also showing as down. I think it's all confused! When I click on IP routing table and IP address table, the external address (marked as xxx) swaps interfaces from WAN1 to WAN2. IP Routing Table : fortinet.domain.local Route Destination Interface Name Next Hop Type 0.0.0.0 wan1 xxx.xxx.xxx.xxx indirect(4) 10.10.10.0 internal 0.0.0.0 direct(3) 192.168.100.0 dmz 0.0.0.0 direct(3) 213.86.200.216 wan1
Configure Threshold
Hi, if I wanted to configure threshold for disk space used, 1. what is the figure to insert ? Any calculation ? 2. What is the difference in configuring threshold on used disk space and free disk space ? 3. What is rearm value
Cisco Aironet AP 340
Hi folks, There's a way to add a Cisco Aironet AP-340 via SNMP? I've configured snmp on Cisco device, but OpManager stores that as Unknow desktop device. What I've to do? Thanks for your support Regards Andrea
Printer consumables?
How do I configure a new snmp based resource monitor. eg. I want to see the amount of toner i my printers?
Fortigate 60 and 200A
i have a fg-60 and a 200A if i montor the 2 firewall's everything looks oke but i don't see any interfaces and no memory and cpu util no active connection. the fg-60 are running on version 2.8 MR11 Can you help me? Regards, Roel
Failed to establish connection with web server
what this message means I am running SuSe 9.3 with apache2 and I am taking this message "Failed to establish connection with web server. Gracefully shutting down OpManager"
Windows Service Monitors all monitors are down
I use obmanager to monitoring servers in different domain with different snmp comminucation strings. Now we have a problem with te windows service monitors, all de monitors are down. Help :?:
Line Continuation in opmanager_graphInfo.xml
Hello, I am trying to add a formula in the <oid> section, but the formula is quite long and needs to be put on different lines in the file. How do I go about doing this? Thanks.
Unable to Backup after Upgrade to 6.0
I recently upgraded from 5.6 to 6.0. I am attempting to perform a backup of the system using Backup.bat but it fails with an error: Please wait ! Backup in Progress..................... /java.sql.SQLException: General error, message from server: "Table 'opmanagerdb.dcobject' doesn't exist" at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:1822) at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1017) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1106) at com.mysql.jdbc.Connection.execSQL(Connection.java:2027)
how to take Backup of Opman. from Windows to Linux server
Hi all I have one query Presently we have installed opmanager in windows server , taking monitoring of servers from there. Now i have installed opmanager 6.0 on debian. I want to import my all data from windows server to debian server . i want all existing setting setting which i have made on my windows server into linux debian server . IS it possible ? IF yes , pls give me detailed information ,after fresh installation which file from windows server i have to backup to which dir into debian server
problems with Debian and SNMP
hi folks, I've installed OpManager on Debian Etch. I don't know why, but I see Debian as Unknown Desktop, and I couldn't see CPU utilization, MEM, etc ... What I've to do? I've already installed snmpd, snmp, my snmpd.conf is in attach, snmpwalk works correctly... Thanks for all, any advice will be appreciated Regards Andrea
OPM regularly stops working
Hi. opm regularly quits with the following error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@india.adventnet.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.0.47 (Win32) mod_jk/1.2.3-dev Server at server Port 80 the last
Next Page