Wrong IF Numbers with OpManager 5.6

I am having the same problem with my FGT60. I am using 5.6 build 5601.

WAN2 is showing as WAN1 and it is also showing as down.

I think it's all confused!

When I click on IP routing table and IP address table, the external address (marked as xxx) swaps interfaces from WAN1 to WAN2.

IP Routing Table : fortinet.domain.local
Route Destination Interface Name Next Hop Type
0.0.0.0 wan1 xxx.xxx.xxx.xxx indirect(4)
10.10.10.0 internal 0.0.0.0 direct(3)
192.168.100.0 dmz 0.0.0.0 direct(3)
213.86.200.216 wan1 0.0.0.0 direct(3)

IP Address Table : fortinet.springfield.local
IP Address Interface Name Netmask
10.10.10.1 modem 255.255.255.0
192.168.100.1 dmz 255.255.255.0
192.168.200.1 wan1 255.255.255.0
xxx.xxx.xxx.xxx wan2 255.255.255.252

I am also attaching the respond from .1.3.6.1.2.1.4.20

ipAdEntAddr.10.10.10.1:10.10.10.1
ipAdEntAddr.192.168.100.1:192.168.100.1
ipAdEntAddr.192.168.200.1:192.168.200.1
ipAdEntAddr.xxx.xxx.xxx.xxx:xxx.xxx.xxx.xxx
ipAdEntIfIndex.10.10.10.1:5
ipAdEntIfIndex.192.168.100.1:4
ipAdEntIfIndex.192.168.200.1:2
ipAdEntIfIndex.xxx.xxx.xxx.xxx:3
ipAdEntNetMask.10.10.10.1:255.255.255.0
ipAdEntNetMask.192.168.100.1:255.255.255.0
ipAdEntNetMask.192.168.200.1:255.255.255.0
ipAdEntNetMask.xxx.xxx.xxx.xxx:255.255.255.252
ipAdEntBcastAddr.10.10.10.1:1
ipAdEntBcastAddr.192.168.100.1:1
ipAdEntBcastAddr.192.168.200.1:1
ipAdEntBcastAddr.xxx.xxx.xxx.xxx:1
ipAdEntReasmMaxSize.10.10.10.1:65535
ipAdEntReasmMaxSize.192.168.100.1:65535
ipAdEntReasmMaxSize.192.168.200.1:65535
ipAdEntReasmMaxSize.xxx.xxx.xxx.xxx:65535
.1.3.6.1.2.1.4.20.1.6.10.10.10.1:0
.1.3.6.1.2.1.4.20.1.6.192.168.100.1:0
.1.3.6.1.2.1.4.20.1.6.192.168.200.1:0
.1.3.6.1.2.1.4.20.1.6.xxx.xxx.xxx.xxx:0

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Any and all help apprecaited.

Regards

Warren